Free linux reiserfs data recovery by unistal 12.4 software for linux

Poisson Media Recovery project can be used to retrieve slightly damaged files from CD-ROM media.

It sequentially mounts and umounts the device, and on each mount it tries to read as many new 512 byte sectors as possible.

I was able to use this tool to save some files from old CDs.

The gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program called gzrecover. gzip Recovery Toolkit package is still very experimental at this point.
99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.

Crash Recovery for Linux sounds a bit superfluous. Linux is regarded as one of todays most stable Operating Systems. In the case of some hardware failure like a broken disk it can however be handy.
Of course your machine doesnt have to have linux installed to make use of the CRK kit. There are several uses and purposes for the CRK to be used. To name a few :
- recovery of a trashed LILO boot record. How many times does it happen that some person installs windows 98/95 after he/she installed linux? Well in that case windows 9X just overwrites the MBR record and linux wont be able to boot anymore.
- backup over the network in the form of tar.gz tarballs. Both FAT16, FAT32, ext2 and all filesystems which Linux supports in a read/write fashion can be taken care of. The strong part of the CRK is when a disk is replaced or repartitioning is being done. The CRK boots a complete mini linux with networking where all possible hardware which is inside the Linux kernel is available.
- Testing hardware of new intel based machines.
- Detecting versions and types of hardware. The Linux kernel holds a large database of hardware supported. Booting a linux kernel doesnt only resolve if the hardware is ok, it also show its specs. This can be handy if one wants to check-out an old/new PC which is for sale.
- Recovery of a misconfigured or hacked Linux system. Well that can happen. /etc/fstab can be wrong or the root password is unknown etc.
- make a tape backup of a disk which cant be booted anymore.
The CRK is based on RedHat Linux. I have always used RedHat systems, thats why. When my system needed maintenance the rescue floppy image which RedHat supplies didnt fullfill my needs.
Thats why i created the CRK. Lately i use Mandrake. How and why the CRK was created read the short history. The CRK is licensed under the GNU Public License (GPL).

LiMP is a a tiny LIVE CD based linux distro, that loads into memory and works only in the memory. This is the easiest, simpler yet powerful distro that works in all computers (PIII onwards).
Linux Multimedia Player supports most of the known formats, let it be mpeg-I, or mpeg-II, or divx, or wmv,qt-mov,real video for video and for audio mp3,wav,wma, ogg, real audio. It has the auto detection of partitions (ide or sata or scsi), sound cards,video cards, network cards and supports all the the cards as of kernel 2.6.13. It identifies the Partitions and mounts in the folder START.
It has the network support, which can be configured inside the GUI. It also mounts the Windows Shares, Linux Smb shares in the folder START.
It is complete tiny OS, with menu driven option and requires no knowledge of linux. All in a embedded image file of size 35 MB that gives you the entertainment. It can be easily integrated into WINDOWS XP/2000/98/95 or in linux boot loader or boot from cdrom.
LiMP distro runs only from memory and so CDROM/DVD is free to use. LiMP is completely safe to use as it mounts the partitions (NTFS, EXT2, EXT3, REISERFS) and windows / linux shares in READONLY mode.
Computer Shutdown schedule for bed time listeners. It supports viewing encrypted DVDs (Zone set DVDs). User has to option to load his favorite language font, for viewing subtitle User can set his favorite skin for xmms as default so that it loads on startup.
It runs a vnc server and can be accessed remotely from any vnc client.
Enhancements:
- The kernel was updated to 2.6.21.1.
- ALSA was updated to 1.0.14rc3.
- Idesk, a desktop program, was added.
- Mplayer, conky, and openbox were updated.
- Xdialog was added, providing an even easier interface.
- LiMP includes compressed cache to give better performance (http://linuxcompressed.sourceforge.net/).

Kaboot Linux Operating system aims to provide an operating system which you can take anywhere and has all your favourite programs on.
Kaboot operating system is avaliable as a Live CD or Live USB you can take with you anywhere.
A number of different versions are avaliable, two optimised for size or speed, one for functionality, and one science based.
All containing a host of useful programs able to boot virtually any computer (meeting the minimum requirements) from CD and
USB.Kaboot is still in active development and if you find a bug or fix, you can let me know in the forums.
Enhancements:
- A network bug was fixed.
- A few debugging utilities were added.
- Hotplugging was implemented.

Linux Commander is a powerful file manager for the X Window System.

It is partially modelled after Window Commander for Windows.

Make CD-ROM Recovery makes a bootable (El Torito) disaster recovery image (CDrec.iso), including backups of the linux system to the same CD-ROM (or CD-RW) if space permits, or to a multi-volume CD-ROM set. Otherwise, the backups can be stored on another local disk, NFS disk or (remote) tape.

After a disaster (disk crash or system intrusion) the system can be booted from the CD-ROM and one can restore the complete system as it was (at the time mkCDrec was run) with the command /etc/recovery/start-restore.sh

Disk cloning (clone-dsk.sh script) allows one to restore a disk to another disk (the destination disk does not have to be of the same size as it calculates the partition layout itself). A thrid script, restore-fs.sh, will restore only one filesystem to a partition of your choice, and the user can choose with which filesystem the partition has to be formatted.

Linux 2.2.x, 2.4.x and 2.6.x kernels are supported, and if size of the kernel is not too big a boot floppy can be made, otherwise a 2.88 Mb boot floppy will be emulated on CD-ROM.

MkCDrec supports ext2 , ext3, minix, xfs , jfs, reiserfs file systems, LVM and software RAID (multiple devices). Each file system is backed up as a compressed tar archive (including the tar log). The compress program used is the users choice (compress, gzip, bzip2, lzop,...)

But there is more: msdos, fat, vfat and ntfs mounted partitions are recognized and are saved as compressed dumps (on CD, tape, etc.)
The user has the possibility to encrypt all backups with openssl if desired (see the Config.sh configuration file for more information).

To restore your system completely just boot from the first CD-ROM made by mkCDrec and type "/etc/recovery/start-restore.sh " to restore everything from CD. Automatic Disaster Recovery and One Button Disaster Recovery are supported by mkCDrec too.
With the clone-dsk.sh script one can restore selective a disk or partitions to another free disk.

mkCDrec supports IDE (inclusive ATA), SCSI disks, hardware RAID based disks (e.g. Compaq SMART2 Disk Array), LVM and software RAID. With an El-Torito CD-ROM you can boot from an IDE or SCSI based CD-ROM drive on IA32/64, powermac and x86_64 GNU/Linux based computer systems only.

Leka Rescue Floppy is a small Linux distribution that boots from an 1,44Mb floppy and runs from the system ram. Leka Rescue Floppy was designed to be a rescue floppy, but you can do MUCH more with it.
LINUX install:
1. cd to the directory where you downloaded the image
2. Insert a 1,44Mb floppy to your floppy drive
3. Type: dd if=leka-X.X.X.img of=/dev/fd0 (replace X.X.X with the version number)
Enhancements:
- Keymap selector rewritten
- New keymaps (20 total)
- ReiserFS support updated to 3.5.35 (incompatible with linux 2.4 reiserfs v3.6)
- cosmetic changes to add