Free lids 2.2.3 rc 1 for kernel software for linux

LIDS (Linux Intrusion Detection System) is a kernel patch and admin tools which enhances the kernels security by implementing Mandatory Access Control (MAC).

When it is in effect, chosen file access, all system network administration operations, any capability use, raw device, memory, and I/O access can be made impossible even for root. You can define which programs can access specific files.

It uses and extends the system capabilities bounding set to control the whole system and adds some network and filesystem security features to the kernel to enhance the security.

You can finely tune the security protections online, hide sensitive processes, receive security alerts through the network, and more. LIDS currently support kernel 2.6, 2.4.

Install Kernel interfaces with the Linux operating system by running a series of functions or groups of commands that automate the compiling or recompiling and installation process.
Install Kernel project consists of three groups of functions: building the kernel and moving files, checking dependencies, and editing the boot loader configuration file. Grouping all of the functions in these three groups makes maintaining and altering the script much easier.
Install Kernel can also be considered a program, because a program does checking and makes choices accordingly. A script is usually a file, which contains a certain number of commands with no logic in mind. Therefore, while ik is technically a script, it can also be called a program.
Dependency checks are to make sure the current system configuration and settings are properly setup before proceeding with the kernel build. There are seven dependency checks, they are: a root check, space check, link check, boot check, boot loader check, configuration check, and a module check.
First, the root check makes sure the user is a super user; which means they are capable of editing important system files only accessible to the root account. The space check makes sure there is at least 200 megabytes available.
The kernel source these days is around 150 megabytes just for the source code. When one compiles the kernel, it may increase the size to 50 megabytes or more. Therefore, ik
checks for at least 200MB available in order to successfully compile the kernel without running out of space. Next, it is not required, but it is standard to have a symbolic link of /usr/src/linux pointing to /usr/src/linux-x.y.z.
The fourth check makes sure the user has a /boot directory, this is where the Linux kernel files will be installed to. The fifth check determines the bootloader that will be used. There are two main boot loaders in Linux. LILO and GRUB are the two most popular for booting the operating system.
This check accurately finds whether the kernel was booted from either LILO or GRUB by checking which bootloader was used last. It then tells the rest of the script to edit the correct one accordingly. The sixth configuration check is to make sure users have created a proper kernel configuration file, which is used in the process of building the Linux kernel.
The final check is a module check, if modules are turned off, the script will determine this and alter the installation process to install with no module support. The main idea behind the depdency checks is to make sure the user cannot damage his or her system if they do not do something right.
The installation process also contains seven functions. The installation process is usually several commands. However, because of the differences that can occur in a users configuration file, each part of the building process must be checked and the building process may need to be altered.
The first function makes sure the dependencies are setup correctly for all files in the kernel source tree. The second function deletes stale object files and or old kernel files. Next, the third function is the kernel build function; this function runs a command to build the Linux kernel. Next, functions four and five make and install modules if the user had specified module support in his or her kernel configuration file.
The sixth function moves the Linux kernel and its System dependency map to the boot partition. The last function of the build process sets up module dependencies for the new kernel if modules were defined. The installation process also includes a small error check for each part of the kernel build process.
If any part of the kernel build process fails; the script will abort, not modifying any boot loader configuration files. This is important; because if it did not abort, it may alter the boot loader configuration files, thus rendering the system unbootable. It is important to support every Linux configuration possible because of the wide use of this script.
The boot loader configuration and setup process is probably the most important aspect of installing a new kernel. An improper boot loader configuration may leave one with system that does not boot; or simply does not boot the new kernel.
It is also important, as some systems may have two or more boot loaders installed. There are four functions defined for this process. The first function uses the boot loader, which was defined during the configuration checks. The second function defines where the LILO or GRUB configuration files are located.
Next, depending on which boot loader is found, either LILO or GRUB configuration files are edited automatically by sed. Sed is a stream editor, which edits a file with no user intervention. If user intervention were required, the user would have to be present between certain parts of the kernel installation. With ik, it makes efficient use of a users time because only one command needs to be entered to complete the entire installation and setup process.
Install Kernel is a useful tool for those who are new to Linux, rebuild their kernel often, or value their time. It reduces the commands for installing the kernel from about thirteen to one. Users new to Linux may find this attractive.
This is because the entire process is automated; and if something is not correct, in most cases ik will notify the user what is incorrect, and how to fix the error. On the other side, for experienced users who do not wish to spend valuable time installing a new kernel, this is also very handy. Install Kernel is efficient by requiring no user intervention and reducing time spent on kernel installs, and effective by giving new to Linux the option for an easy kernel upgrade.
Enhancements:
- Updated to work with the newer version of coreutils for head and tail.
- The MAKE_JOBS directive has been removed in favor of make -j2 to prevent make from spawning hundreds of jobs if /proc/cpuinfo did not exist.

Stratagus is a free cross-platform real-time strategy gaming engine. Stratagus includes support for playing over the internet/LAN, or playing a computer opponent.

The engine is configurable and can be used to create games with a wide-range of features specific to your needs. See the data sets page for a list of current games using the stratagus engine.

Keepalived for Linux projects goal is to add a strong & robust keepalive facility to the Linux Virtual Server project. This project is written in C with multilayer TCP/IP stack checks. Keepalived implements a framework based on three family checks : Layer3, Layer4 & Layer5/7.

This framework gives the daemon the ability of checking a LVS server pool states. When one of the server of the LVS server pool is down, keepalived informs the linux kernel via a setsockopt call to remove this server entrie from the LVS topology.

In addition keepalived implements an independent VRRPv2 stack to handle director failover. So in short keepalived is a userspace daemon for LVS cluster nodes healthchecks and LVS directors failover.

Why using Keepalived ?

If your are using a LVS director to loadbalance a server pool in a production environnement, you may want to have a robust solution for healthcheck & failover.

Linux Kernel Monitor is a tool for monitoring and managing linuxs kernel. It has been developed for GNOME, using Glib and Gtk libraries in C language.
lkmonitor tries to offer detailed information of the characteristics of the system, as type of cpu, state of the memory or the file system registered in kernel.
lkmonitor is an open source project with information about the source code and software architecture to make easy the development of new characteristics.
Enhancements:
- IO information, kernel information, networking info, processes specific information, filesystems, modules, etc.

Splashy for Edgy project paints graphic images directly to framebuffers using libdirectfb.

Splashy is a boot splash program that doesnt require patching the Linux kernel. Splashy project paints graphic images directly to framebuffers using libdirectfb.

-----------------------------------------------------------------
VGA settings
-----------------------------------------------------------------
640x480 800x600 1024x768 1280x1024
256 colors 768 771 773 775
32K colors 784 787 790 793
64K colors 785 788 791 794
16M colors 786 789 792 795
-----------------------------------------------------------------

For 1024x768 at 16bit (64K colors or "thousands of colors") you could pass an argument to the kernel like:

vga=791

These values could be used in base16 also (hexadecimal) like:

vga=0x317

To pass arguments to the kernel, you would need to edit your boot-loader:

1. Grub /boot/grub/menu.lst
hint, in debian, look for "#kopt" and append vga=0x317 to that line. Then run update-grub. Other distros edit the kernel root= line appropriately
2. Lilo /etc/lilo.conf
hint, look for the default image= and edit append= by appending vga=0x317 to it
3. Quik /etc/quik.conf
on PPC machines. Append vga=0x317 to the kernel argument line