Free lexmark z11 printer driver software for linux

Lexmark Z11 printer driver for Linux is a Linux printer driver/filter for the Lexmark Z11 printer, supporting color and b/w printing, variable page size and more.
The driver lz11-V2 is an improvement of the lz11 driver, which was first released in 2002. Additionally to the features of lz11, which include variable page sizes and ink saving, the lz11-V2 version comes with a backward compatibility mode for the filters "cZ11" and "cZ11somsom". While the cZ11 filter is emulated in an improved way, which helps to save ink and takes away the grayish look of color prints, the cZ11somsom emulation only supports the basic properties (as InkType and DitherPPI). Ink weighting is not included, but merely needed, because of a new pixel placement algorithm for black and color ink.
"Highlights" of the lz11-V2 are: further improved printing speed for black ink and a tool to align the skew of the black ink cartridge. A smooth-dithering algorithm for black and color prints was added. The driver comes with an improved set of installation and utility scripts that support automatic installation-option-checking, testpage-printing, black-ink-adjustment, automatic installation of foomatic-xml-files as well as automatic installation of the included PPD files for CUPS and PPR. For backward compatibility reason the GhostScript device emulation (as "hpdj", "epsonc", ...) is still included, but should never be offered on "modern" Linux installations.
The original driver-code "cZ11" was written by Christian Kornblum in 2001 (this code still is the backbone of this filter).
WARNING:This driver is known not to work with the Z31 and Z51. In fact, it is known to hose those printers flash in some circumstances!
Enhancements:
- The installer can be called by ./lz11.install --debug, which will produce BMP files instead of paper prints (for test)
- Now the cups-restart is done also properly for Debian and Gentoo
- An installed Z11 printer-queue (PPD) and its options are updated automatically during installation
- The print-job cancelling is now appropriate for hotplug generated devices. Printer "hick-ups" on a resume are prevented
- The print-job cancelling is shown automatically in an "xterm"
- some smaller bug fixes

Xbox360 Controller Driver package contains the diabolixs compiled Xbox360 controller driver for Linux on the PS3.

Its been tested with Fedora Core 5 (PPC distribution) using Snes9x and Doom.

The Xbox 360 is the successor to Microsofts Xbox video game console, developed in cooperation with IBM, ATI, Samsung and SiS. Information on the console first came through viral marketing campaigns and it was officially unveiled on MTV on May 12, 2005, with detailed launch and game information divulged later that month at the Electronic Entertainment Expo.

The Xbox 360 is the first console to have a near-simultaneous launch across the three major regions, and the first to provide wireless controller support at launch. The console sold out completely at release and by the end of 2006 had sold 10.4 million worldwide.

The Xbox 360 was the first home console to be released in the seventh generation of game consoles and competes against Sonys PlayStation 3 and Nintendos Wii. Its Xbox Live service allows players to compete online as well as download games and additional content.

Dell 1600n network scanner driver is a driver for network scanning using a Dell 1600n Printer/Scanner/Fax/Copier.
It is implemented as a Perl script. In principle, this means that it should be cross-platform.
It has been tested under Linux (Debian) and Windows (NT4 with Cygwin) on Intel. Supported formats are TIFF and JPEG. With an external program (e.g. ImageMagick convert), PDF is supported.
Main features:
- TIFF and JPEG network scanning using a Dell 1600n MFP.
- PDF scanning support via an external program (eg: ImageMagick convert)

Semtech Touchscreen Driver is a driver on X for the Semtech Touchscreen as found on the GoBook III manufactured by Itronix.

It comes with a calibration program and has been tested on Linux 2.6.9.

You will need a kernel with the following options compiled.

CONFIG_SERIO_RAW=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y

Next you will need to enable raw PS/2 reporting for the touchscreen. Type in the following command:

echo -n "serio_raw" > /sys/bus/serio/devices/serio1/driver

You should see the following message:

serio_raw: raw access enabled on isa0060/serio2 (serio_raw0, minor 1)

Compiling:

Type the following command to compile the driver:

make

Installing:

Do the following as root to install the driver:

make install

Configuration:

You will need to issue this command every time the computer starts so I suggest you stick somewhere in the initalization scripts.

Add a section in xorg.conf or XF86Config that looks like this:

Section "InputDevice"
Driver "semtech"
Identifier "Semtech Touchscreen"
Option "Device" "/dev/serio_raw0"
Option "DebugLevel" "0"
Option "CalibrateA" "-369046"
Option "CalibrateB" "1114"
Option "CalibrateC" "4893014"
Option "CalibrateD" "-2152"
Option "CalibrateE" "-282719"
Option "CalibrateF" "5331971"
Option "CalibrateDiv" "-359811"
EndSection

Note that the device can also be called /dev/psaux depending on your setup.

Start X and run the touchcal program to calibrate your screen. It will ouput the calibration information

There is also a program called touchcal.pl, it requires the Perl Tk toolkit. The program will write calibration information on your X configuration file.

Optimus OLED Keyboard Linux Driver project is intended to provide a generic linux driver for OLED-based hardware made by Art. Lebedev Studio.
The current goal is to support the Optimus Mini Three keyboard.
Main features:
- Uses libusb to communicate with device (no specific kernel driver needed)
- As the kernel-provided module for pl2303 didnt work in our case, we recoded the driver with libusb
- Uses libpng to read PNG images, and display them
- Detects when a button is pressed
- Implements OLED_PROTOCOL_SET_IMAGE, OLED_PROTOCOL_POWER_ON, OLED_PROTOCOL_POWER_OFF, OLED_PROTOCOL_SHOW_OLED, OLED_PROTOCOL_GET_IDCODE, OLED_PROTOCOL_SET_IDCODE, OLED_PROTOCOL_SET_BRIGHTNESS.
- Support for more than one OLED Mini Three connected to the same computer
- All USB code is in a static library
Enhancements:
- One of the most annoying bugs (auto-switch-off of the key display after five seconds) has been fixed.
- Functions similar to the ones provided by the original Win32 library for image color settings are also available, allowing you to set color temperature and gamma.
- Theres better support for input, using threads as libusb only provides a blocking way to read data (or some bytes are missed).

HDBC Sqlite3 Driver is the Haskell Sqlite v3 backend driver for HDBC.

Please see HDBC itself for documentation on use. If you dont already
have it, you can browse this documentation at
http://darcs.complete.org/hdbc/doc/index.html.

This package provides one function in module Database.HDBC.Sqlite3:

{- | Connect to an Sqlite version 3 database. The only parameter needed is
the filename of the database to connect to.

All database accessor functions are provided in the main HDBC module. -}
connectSqlite3 :: FilePath -> IO Connection

Card Terminal Driver Library aims to add support for smart card and magnetic stripe card terminals, such as the IBM 4779, to Linux, and other Posix compatible systems.

Things that should get done:

1) Add error checking to all routines (except read/write/open/close4779: those already include error checking and reporting.

2) Add to the examples in the examples directory.

3) Work on more abstract functions so we can integrate this with libcardterm (eventually). These include (amoung others):

InsertCard()
EjectCard()
ReadTrack()
SmartComm()
WriteDispAtPos()
GetPIN()
GetKeys()

4) Write README and INSTALL files

HP Linux Imaging and Printing Driver Project consists of two projects:

1) HPIJS, a printer driver for HP devices

2) HP Linux Imaging and Printing (HPLIP), a complete printing and imaging solution for Linux (note: HPLIP includes HPIJS).