Free kerio winroute firewall software for linux

InJoy Firewall is a flexible firewall security solution for businesses of any size. It offers preconfigured policy templates, including full customization options, IPSec VPN integration, gateway capabilities, intuitive management, access control, many documented deployment examples, and comprehensive documentation.

Without question, the Linux Operating System provides a proven and cost-effective platform, as well as a wealth of high-quality open source software. For business use, however, it often proves difficult to find supported linux firewall solutions that provide the required level of confidence, reliability and trust. With the InJoy Firewall™, businesses can benefit from Linux without having to give up the safety of a responsible vendor and a traditional business relationship.

Security as never before — the InJoy Firewall™ for Linux provides customers with next generation intrusion and anomaly detection. These technologies provides network administrators with the ultimate tools to keep track of network activity and eliminate Internet threats of any type.

As a busy and responsible network administrator, you will find great relief in the InJoy Firewall™. As the only Linux firewall, it is designed from the ground up to be self-contained, thus ensuring optimal performance and minimum impact from third-party problems. This means you dont have to worry about dependencies with Linux connectivity software, software libraries or kernel compilation.


Manage your remote Linux-based Firewall Server from your Windows-based desktop (or any other supported Operating Systems), using the intuitive InJoy firewall™ GUI. Linux users that prefer plain-text configuration can opt for that with the InJoy firewall™ as well.

The InJoy firewall™ works the same under all the supported operating systems, meaning you can deploy a complete and unified protection strategy throughout the business and effortlessly set up fully capable VPNs without having to worry about interoperability issues.

The InJoy firewall™ installs in minutes and can be prepared for distributed, company-wide deployment, using the same simple installation scripts everywhere.

SINUS project is a application which assess the potential of security without obscurity.
The SINUS Firewall is a TCP/IP packet filter for the Linux operating system. It is distributed under the GNU General Public Licence and comes with complete source code, as the Linux operating system does.
The SINUS firewall is a free and easy way to protect your network from the malware of the Internet. It does not guarantee perfect security, however it comes with a wealth of features, including:
Filtering of all header fields in the IP, TCP, UDP, ICMP, IGMP packets.
Intelligent RIP and FTP support.
Easy to understand, text-based configuration.
Graphical management interface for configuration of several firewalls.
Dynamic rules, including counters and time-outs.
Extensive logging, alerting, and counter intelligence.
Prevention of packet and address spoofing - GNU GPL license.
To install the software, you need a Linux 2.0.x based system. We suggest you install a bare-bone system without X or any of the other nifty features which tend to have security holes. You should not install user accounts on the firewall system. Log-ins other than from the console should be forbidden (if you absolutely have to log in remotely, we strongly suggest you install a copy of ssh).
Although the software has been subject to thorough testing, and has been continuously running without crashes for over 12 months, we are confident someone will eventually unconver A BUG in the software. Therefore, it is version "0.1".
Please do not use this software as the sole means to protect your top secret data. This software is intended for:
People who want to study firewalls
People who dont trust their current firewall
People who currently dont have any protection at all (even if there are serious bugs, it cannot get worse, can it?)
Enhancements:
- NEW FEATURES
- user level authentification between firewall and management interface
- compiles and runs on libc6 (glibc2) systems.
- CHANGES
- management interface now written as Java application (JDK 1.1.6)
- detect land attack
- changed name from sf to sifi (SINUS firewall) due to change of maintainer (now Harald Weidner ).
- BUG FIXES
- TCP RST of established connections now pass through the firewall
- fixed a segfault bug in the passive FTP code

Multi Network Firewall is the up-to-date Mandriva Linux security solution dedicated to the business world. Maximum innovation, performance and scalability is only a click away thanks to an easy-to-use web interface.
Combining firewall, Intrusion Detection System and VPN functionality, MNF 2 is the ultimate full-featured security solution meeting all your demands. Furthermore, to make your network even more secure, benefit from a year of free updates through Mandriva Online Pro!
Main features:
- a firewall, to protect your computer network from unauthorized access (filtering).
- Intrusion Detection System, to alert you to abnormal network activity.
- Virtual Private Network, to enable a secure private tunnel over public networks.
- Proxy server, to intercept all web traffic entering the network.
- DHCP server, to enable the automatic configuration of new machines connected to the LAN.
- Caching DNS, to provide a local DNS service for computers connected to the LAN.
New Featurs:
As well as the existing IPSec, MNF2 provides 2 other types of VPN:
PPTP: a desktop under Windows(R) can be automatically connected without installing any special software
OpenVPN: a lighter open source VPN; Compattible with Linux, Mac OS and Windows
Bonding: Channel combines several network interfaces into a single connection. Effectively, it means that data transfer speeds can be multiplied.
Bridging: this new function enables the administrator to build bridges between network interfaces.
Traffic shaping: You can regulate the flow of traffic on your network just by clicking on a wizard.
Network mapping: Makes it possible to connect networks which use the same private network addresses
Peer-to-Peer Filtering: MNF2 automatically blocks network traffic from "Fast Track" peer-to-peer clients.
Better software support
2.6 Linux Kernel
Better hardware support
Improved support for multiple network cards (up to 10)
Wi-Fi Support
Better ADSL support
Services included in the product
Mandriva Online Pro: benefit from updates for one year through Mandriva Online Pro
Support included/

NATting SOHO firewall is a firewall script for iptables.

# Model NATting SOHO firewall for SP article
# by Jay Beale (jay@bastille-linux.org)
#
# Warning: youre going to have to hack this for your own purposes.
#

# Assumptions:
# your internal network is 192.168.1.0/24 on eth1
# your internet IP is 10.0.0.1 on eth0
# your internal network IP on eth1 is 192.168.1.1
#
# Additonally:
# you have another internal network, a DMZ: 192.168.2.0/24 on eth2

$INTERNAL_IP = 192.168.1.1
$INTERNAL_NET = 192.168.1.0/24

$INTERNET = 10.0.0.1

$DMZ = 192.168.2.0/24

# Insert the required kernel modules
modprobe iptable_nat
modprobe ip_conntrack
modprobe ip_conntrack_ftp

# Set default policies for packets going through this firewall box

iptables -t nat -P PREROUTING DROP
iptables -t nat -P POSTROUTING DROP
iptables -P FORWARD DROP

# Set default policies for packet entering this box

iptables -P OUTPUT ALLOW
iptables -P INPUT ALLOW

# Kill spoofed packets

for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 > $f
done

# Anything coming from our internal network should have only our addresses!
iptables -A FORWARD -i eth1 -s ! $INTERNAL_NET -j DROP

# Anything coming from the Internet should have a real Internet address
iptables -A FORWARD -i eth0 -s 192.168.0.0/16 -j DROP
iptables -A FORWARD -i eth0 -s 172.16.0.0/12 -j DROP
iptables -A FORWARD -i eth0 -s 10.0.0.0/8 -j DROP

# Note:There are more "reserved" networks, but these are the classical ones.

# Block outgoing network filesharing protocols that arent designed
# to leave the LAN

# SMB / Windows filesharing
iptables -A FORWARD -p tcp --sport 137:139 -j DROP
iptables -A FORWARD -p udp --sport 137:139 -j DROP
# NFS Mount Service (TCP/UDP 635)
iptables -A FORWARD -p tcp --sport 635 -j DROP
iptables -A FORWARD -p udp --sport 635 -j DROP
# NFS (TCP/UDP 2049)
iptables -A FORWARD -p tcp --sport 2049 -j DROP
iptables -A FORWARD -p udp --sport 2049 -j DROP
# Portmapper (TCP/UDP 111)
iptables -A FORWARD -p tcp --sport 111 -j DROP
iptables -A FORWARD -p udp --sport 111 -j DROP

# Block incoming syslog, lpr, rsh, rexec...
iptables -A FORWARD -i eth0 -p udp --dport syslog -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 515 -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 514 -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 512 -j DROP

###
# Transparently proxy all web-surfing through Squid box

$SQUID = 192.168.1.2:8080
$SQUIDSSL = 192.168.1.2:443
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 80 -j DNAT --to $SQUID
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 443 -j DNAT --to $SQUIDSSL

# Transparently forward all outgoing mail to a relay host

$SMTP = 192.168.1.3
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 25 -j DNAT --to $SMTP

# Transparently redirect web connections from outside to the DMZ web
# server

$DMZ_WEB = 192.168.2.2
iptables -t nat -A PREROUTING -i eth0 -d 192.168.1.1 -dport 80 -j DNAT --to $DMZ_WEB

# Source NAT to get Internet traffic through
iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to $INTERNET


# Activate the forwarding!
echo 1 >/proc/sys/net/ipv4/ip_forward

Initial SIMPLE IP Firewall is a script for Linux 2.4.x and iptables.

Sample:

Configuration options

###################################
#
# Local Area Network configuration.
#
# your LANs IP range and localhost IP. /24 means to only use the first 24
# bits of the 32 bit IP adress. the same as netmask 255.255.255.0
#

LAN_IP="192.168.0.2"
LAN_IP_RANGE="192.168.0.0/16"
LAN_BCAST_ADRESS="192.168.255.255"
LAN_IFACE="eth1"

###################################
#
# Localhost Configuration.
#

LO_IFACE="lo"
LO_IP="127.0.0.1"

###################################
#
# Internet Configuration.
#

INET_IP="194.236.50.155"
INET_IFACE="eth0"

###################################
#
# IPTables Configuration.
#

IPTABLES="/usr/sbin/iptables"

Module loading

#
# Needed to initially load modules
#
/sbin/depmod -a

#
# Adds some iptables targets like LOG, REJECT and MASQUARADE.
#
/sbin/modprobe ip_conntrack
/sbin/modprobe ip_tables
/sbin/modprobe iptable_filter
/sbin/modprobe iptable_mangle
/sbin/modprobe iptable_nat
/sbin/modprobe ipt_LOG
#/sbin/modprobe ipt_REJECT
#/sbin/modprobe ipt_MASQUERADE

#
# Support for owner matching
#
#/sbin/modprobe ipt_owner

#
# Support for connection tracking of FTP and IRC.
#
#/sbin/modprobe ip_conntrack_ftp
#/sbin/modprobe ip_conntrack_irc

Turtle Firewall is a software which allows you to realize a Linux firewall in a simply and fast way.
Turtle Firewall project is based on Kernel 2.4.x and Iptables. Its way of working is easy to understand: you can define the different firewall elements (zones, hosts, networks) and then set the services you want to enable among the different elements or groups of elements.
You can do this simply editing a XML file or using the comfortable web interface Webmin.
Turtle Firewall is an Open Source project written using the perl language and realeased under GPL version 2.0 by Andrea Frigido (Frisoft).
Main features:
- ZONES, NETWORKS, HOSTS and GROUPS definitions.
- Filter rules definitions based on services.
- New services definitions.
- NAT
- Masquerading

UTIN Firewall script project is a script for Linux 2.4.x and iptables.

###########
# Configuration options, these will speed you up getting this script to
# work with your own setup.

#
# your LANs IP range and localhost IP. /24 means to only use the first 24
# bits of the 32 bit IP adress. the same as netmask 255.255.255.0
#
# INET_IP is used by me to allow myself to do anything to myself, might
# be a security risc but sometimes I want this. If you dont have a static
# IP, I suggest not using this option at all for now but its still
# enabled per default and will add some really nifty security bugs for all
# those who skips reading the documentation=)

LAN_IP="192.168.0.2"
LAN_BCAST_ADRESS="192.168.0.255"
LAN_IFACE="eth1"

LO_IFACE="lo"
LO_IP="127.0.0.1"

INET_IP="194.236.50.155"
INET_IFACE="eth0"

IPTABLES="/usr/local/sbin/iptables"

#########
# Load all required IPTables modules
#

#
# Needed to initially load modules
#
/sbin/depmod -a

#
# Adds some iptables targets like LOG, REJECT and MASQUARADE.
#
/sbin/modprobe ipt_LOG
#/sbin/modprobe ipt_REJECT
/sbin/modprobe ipt_MASQUERADE

#
# Support for owner matching
#
#/sbin/modprobe ipt_owner

#
# Support for connection tracking of FTP and IRC.
#
#/sbin/modprobe ip_conntrack_ftp
#/sbin/modprobe ip_conntrack_irc

#
# Enable ip_forward, this is critical since it is turned off as defaul in
# Linux.
#

echo "1" > /proc/sys/net/ipv4/ip_forward

#
# Dynamic IP users:
#
#echo "1" > /proc/sys/net/ipv4/ip_dynaddr

#
# Enable simple IP Forwarding and Network Address Translation
#

$IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT --to-source $INET_IP

#
# Set default policies for the INPUT, FORWARD and OUTPUT chains
#

$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP

#
# bad_tcp_packets chain
#
# Take care of bad TCP packets that we dont want.
#

$IPTABLES -N bad_tcp_packets
$IPTABLES -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j LOG
--log-prefix "New not syn:"
$IPTABLES -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j DROP

#
# Do some checks for obviously spoofed IPs
#

$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 192.168.0.0/16 -j DROP
$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 10.0.0.0/8 -j DROP
$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 172.16.0.0/12 -j DROP
$IPTABLES -A bad_tcp_packets -i $LAN_IFACE ! -s 192.168.0.0/16 -j DROP

#
# Bad TCP packets we dont want
#

$IPTABLES -A FORWARD -p tcp -j bad_tcp_packets

#
# Accept the packets we actually want to forward between interfaces.
#

$IPTABLES -A FORWARD -p tcp --dport 21 -i $LAN_IFACE -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 80 -i $LAN_IFACE -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 110 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -m limit --limit 3/minute --limit-burst 3 -j LOG
--log-level DEBUG --log-prefix "IPT FORWARD packet died: "


#
# Create separate chains for ICMP, TCP and UDP to traverse
#

$IPTABLES -N icmp_packets
$IPTABLES -N tcp_packets
$IPTABLES -N udpincoming_packets

#
# The allowed chain for TCP connections
#

$IPTABLES -N allowed
$IPTABLES -A allowed -p TCP --syn -j ACCEPT
$IPTABLES -A allowed -p TCP -m state --state ESTABLISHED,RELATED
-j ACCEPT
$IPTABLES -A allowed -p TCP -j DROP

#
# ICMP rules
#

# Changed rules totally
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 8 -j ACCEPT
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 11 -j ACCEPT

#
# TCP rules
#

$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 21 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 22 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 80 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 113 -j allowed

#
# UDP ports
#

$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 53 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 123 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 2074 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 4000 -j ACCEPT

#
# INPUT chain
#
# Bad TCP packets we dont want
#

$IPTABLES -A INPUT -p tcp -j bad_tcp_packets

#
# Rules for incoming packets from anywhere
#

$IPTABLES -A INPUT -p ICMP -j icmp_packets
$IPTABLES -A INPUT -p TCP -j tcp_packets
$IPTABLES -A INPUT -p UDP -j udpincoming_packets

#
# Rules for special networks not part of the Internet
#

$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LO_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LAN_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $INET_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -d $INET_IP -m state --state ESTABLISHED,RELATED
-j ACCEPT
$IPTABLES -A INPUT -m limit --limit 3/minute --limit-burst 3
-j LOG --log-level DEBUG --log-prefix "IPT INPUT packet died: "

#
# OUTPUT chain
#
#
# Bad TCP packets we dont want
#

$IPTABLES -A OUTPUT -p tcp -j bad_tcp_packets


$IPTABLES -A OUTPUT -p ALL -s $LO_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $INET_IP -j ACCEPT
$IPTABLES -A OUTPUT -m limit --limit 3/minute --limit-burst 3
-j LOG --log-level DEBUG --log-prefix "IPT OUTPUT packet died: "

IPCop project implements existing technology, secure programming practices and outstanding new concepts to make it the Linux Distribution for protecting single home computers, to large corporate networks from intrusions and attacks.

Whether for your home, or SOHO, IPCop will scale to fit your needs. IPCop has even been rumoured to be implemented and protecting larger, more complex networks too. See the IPCop MissionStatement for more information on our goals.