interface security
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 5630
Luke Macken Security LiveCD
Luke Macken Security LiveCD provides a fully functional livecd based on Fedora for use in security auditing, forensics research. more>>
Luke Macken Security LiveCD provides a fully functional livecd based on Fedora for use in security auditing, forensics research, and penetration testing.
Main features:
- All of the security features and tools Fedora has to offer
- Features from the FedoraLiveCD
- Ability to install directly to hard drive
Spinning your own
# yum install mercurial livecd-tools
$ hg clone http://hg.lewk.org/security-livecd
# livecd-creator --config security-livecd/fedora-security-livecd.ks --fslabel=Fedora-7-Security-LiveCD
Making changes to the LiveCD is as simple as modifying the fedora-security-livecd.ks configuration file.
<<lessMain features:
- All of the security features and tools Fedora has to offer
- Features from the FedoraLiveCD
- Ability to install directly to hard drive
Spinning your own
# yum install mercurial livecd-tools
$ hg clone http://hg.lewk.org/security-livecd
# livecd-creator --config security-livecd/fedora-security-livecd.ks --fslabel=Fedora-7-Security-LiveCD
Making changes to the LiveCD is as simple as modifying the fedora-security-livecd.ks configuration file.
Download (MB)
Added: 2007-08-09 License: GPL (GNU General Public License) Price:
813 downloads
X Interface Monitor 1.8.4
X Interface Monitor monitors any network interface for traffic, load average, and various other statistics. more>>
X Interface Monitor (abbriviated xifmon) monitors any network interface (most suitable, the ppp# interface) for traffic, load average, and various other statistics using purly ioctl() directly to the Linux kernel.
It also has options to run `connect and `disconnect scripts, for dialup modem users who want easy connecting and disconnecting.
<<lessIt also has options to run `connect and `disconnect scripts, for dialup modem users who want easy connecting and disconnecting.
Download (0.49MB)
Added: 2005-10-13 License: GPL (GNU General Public License) Price:
1477 downloads
Local Area Security 0.5
L.A.S. is a research group focused on information security related subjects. more>>
Local Area Security is a research group focused on information security related subjects. We are most known for L.A.S. Linux. Our live-CD security toolkit.
Local Area Security is a project that was started in 2002 to research information security related topics. During that time there was no real live-CD toolkit focused on information security.
So Jascha, the project founder built one from a stripped down version of Knoppix called Model-K. Both of which were built from Debian Linux.
Up until version 0.4 L.A.S. Linux was command line only. Which made it limited to some of the tools it could contain since many require a GUI. Or at least for many it is preferable to have one. So FluxBox was added as the desktop since it is light weight and very feature filled.
It was during this time that Jascha came up with the idea of keeping the size of L.A.S. as small as possible, which lead to a target maximum size of 180MBs. The size of the original mini-CDs that were available at the time. This forced the selection of tools and features to be weighed heavily since unlike other live-CDs that throw in everything including the kitchen sink. L.A.S. was designed from the ground up to be a tool not a all-inclusive grab bag of applications.
As well as many advances for live-CDs came about, such as to-ram that allows booting a live-CD into the physical RAM of a computer. Which by chance L.A.S. was perfectly cut out for. With as little as 256MB of RAM people could boot L.A.S. and then free up their CD-ROMs for burring etc.
For forensics this was a big plus, along with many other uses. Plus L.A.S. ran very fast in RAM which helped with running Nessus, Nmap, or other tools. When compared to full size (700MB) CDs which would require 1GB of RAM to use the to-ram option, it was really no contest.
<<lessLocal Area Security is a project that was started in 2002 to research information security related topics. During that time there was no real live-CD toolkit focused on information security.
So Jascha, the project founder built one from a stripped down version of Knoppix called Model-K. Both of which were built from Debian Linux.
Up until version 0.4 L.A.S. Linux was command line only. Which made it limited to some of the tools it could contain since many require a GUI. Or at least for many it is preferable to have one. So FluxBox was added as the desktop since it is light weight and very feature filled.
It was during this time that Jascha came up with the idea of keeping the size of L.A.S. as small as possible, which lead to a target maximum size of 180MBs. The size of the original mini-CDs that were available at the time. This forced the selection of tools and features to be weighed heavily since unlike other live-CDs that throw in everything including the kitchen sink. L.A.S. was designed from the ground up to be a tool not a all-inclusive grab bag of applications.
As well as many advances for live-CDs came about, such as to-ram that allows booting a live-CD into the physical RAM of a computer. Which by chance L.A.S. was perfectly cut out for. With as little as 256MB of RAM people could boot L.A.S. and then free up their CD-ROMs for burring etc.
For forensics this was a big plus, along with many other uses. Plus L.A.S. ran very fast in RAM which helped with running Nessus, Nmap, or other tools. When compared to full size (700MB) CDs which would require 1GB of RAM to use the to-ram option, it was really no contest.
Download (210MB)
Added: 2005-11-09 License: GPL (GNU General Public License) Price:
840 downloads
GnuPG::Interface 0.33
GnuPG::Interface is a Perl interface to GnuPG. more>>
GnuPG::Interface is a Perl interface to GnuPG.
SYNOPSIS
# A simple example
use IO::Handle;
use GnuPG::Interface;
# settting up the situation
my $gnupg = GnuPG::Interface->new();
$gnupg->options->hash_init( armor => 1,
homedir => /home/foobar );
# Note you can set the recipients even if you arent encrypting!
$gnupg->options->push_recipients( ftobin@cpan.org );
$gnupg->options->meta_interactive( 0 );
# how we create some handles to interact with GnuPG
my $input = IO::Handle->new();
my $output = IO::Handle->new();
my $handles = GnuPG::Handles->new( stdin => $input,
stdout => $output );
# Now well go about encrypting with the options already set
my @plaintext = ( foobar );
my $pid = $gnupg->encrypt( handles => $handles );
# Now we write to the input of GnuPG
print $input @plaintext;
close $input;
# now we read the output
my @ciphertext = ;
close $output;
waitpid $pid, 0;
GnuPG::Interface and its associated modules are designed to provide an object-oriented method for interacting with GnuPG, being able to perform functions such as but not limited to encrypting, signing, decryption, verification, and key-listing parsing.
How Data Member Accessor Methods are Created
Each module in the GnuPG::Interface bundle relies on Class::MethodMaker to generate the get/set methods used to set the objects data members. This is very important to realize. This means that any data member which is a list has special methods assigned to it for pushing, popping, and clearing the list.
Understanding Bidirectional Communication
It is also imperative to realize that this package uses interprocess communication methods similar to those used in IPC::Open3 and "Bidirectional Communication with Another Process" in perlipc, and that users of this package need to understand how to use this method because this package does not abstract these methods for the user greatly. This package is not designed to abstract this away entirely (partly for security purposes), but rather to simply help create proper, clean calls to GnuPG, and to implement key-listing parsing. Please see "Bidirectional Communication with Another Process" in perlipc to learn how to deal with these methods.
Using this package to do message processing generally invovlves creating a GnuPG::Interface object, creating a GnuPG::Handles object, setting some options in its options data member, and then calling a method which invokes GnuPG, such as clearsign. One then interacts with with the handles appropriately, as described in "Bidirectional Communication with Another Process" in perlipc.
<<lessSYNOPSIS
# A simple example
use IO::Handle;
use GnuPG::Interface;
# settting up the situation
my $gnupg = GnuPG::Interface->new();
$gnupg->options->hash_init( armor => 1,
homedir => /home/foobar );
# Note you can set the recipients even if you arent encrypting!
$gnupg->options->push_recipients( ftobin@cpan.org );
$gnupg->options->meta_interactive( 0 );
# how we create some handles to interact with GnuPG
my $input = IO::Handle->new();
my $output = IO::Handle->new();
my $handles = GnuPG::Handles->new( stdin => $input,
stdout => $output );
# Now well go about encrypting with the options already set
my @plaintext = ( foobar );
my $pid = $gnupg->encrypt( handles => $handles );
# Now we write to the input of GnuPG
print $input @plaintext;
close $input;
# now we read the output
my @ciphertext = ;
close $output;
waitpid $pid, 0;
GnuPG::Interface and its associated modules are designed to provide an object-oriented method for interacting with GnuPG, being able to perform functions such as but not limited to encrypting, signing, decryption, verification, and key-listing parsing.
How Data Member Accessor Methods are Created
Each module in the GnuPG::Interface bundle relies on Class::MethodMaker to generate the get/set methods used to set the objects data members. This is very important to realize. This means that any data member which is a list has special methods assigned to it for pushing, popping, and clearing the list.
Understanding Bidirectional Communication
It is also imperative to realize that this package uses interprocess communication methods similar to those used in IPC::Open3 and "Bidirectional Communication with Another Process" in perlipc, and that users of this package need to understand how to use this method because this package does not abstract these methods for the user greatly. This package is not designed to abstract this away entirely (partly for security purposes), but rather to simply help create proper, clean calls to GnuPG, and to implement key-listing parsing. Please see "Bidirectional Communication with Another Process" in perlipc to learn how to deal with these methods.
Using this package to do message processing generally invovlves creating a GnuPG::Interface object, creating a GnuPG::Handles object, setting some options in its options data member, and then calling a method which invokes GnuPG, such as clearsign. One then interacts with with the handles appropriately, as described in "Bidirectional Communication with Another Process" in perlipc.
Download (0.037MB)
Added: 2006-08-04 License: Perl Artistic License Price:
1176 downloads
GNOME Interface for YUM 0.1.5
GNOME Interface for YUM is a graphical frame-program for easier use and setup the YUM install program. more>>
GNOME Interface for YUM is a graphical frame-program for easier use and setup the YUM install program.
Displays the accessible packages on the package service sites with filter. Manage the settings of package services.
Manage the cache used by YUM: free up disk space, manual install and transfer of downloaded packages. Displays detailed package information about the installed packages or package files. Displays the files in the packages with a program chosen by user.
<<lessDisplays the accessible packages on the package service sites with filter. Manage the settings of package services.
Manage the cache used by YUM: free up disk space, manual install and transfer of downloaded packages. Displays detailed package information about the installed packages or package files. Displays the files in the packages with a program chosen by user.
Download (0.57MB)
Added: 2006-11-17 License: GPL (GNU General Public License) Price:
1076 downloads
Network Security Toolkit 1.5.0
Network Security Toolkit is a bootable ISO live CD and its based on Fedora Core 2. more>>
Network Security Toolkit is a bootable ISO live CD and its based on Fedora Core 2.
The toolkit was designed to provide easy access to best-of-breed Open Source Network Security Applications and should run on most x86 platforms.
The main intent of developing this toolkit was to provide the network security administrator with a comprehensive set of Open Source Network Security Tools. The majority of tools published in the article: Top 75 Security Tools by insecure.org are available in the toolkit.
What we find rather fascinating with NST is that we can transform most x86 systems (Pentium II and above) into a system designed for network traffic analysis, intrusion detection, network packet generation, wireless network monitoring, a virtual system service server, or a sophisticated network/host scanner.
This can all be done without disturbing or modifying any underlying sub-system disk. NST can be up and running on a typical x86 notebook in less than a minute by just rebooting with the NST ISO CD. The notebooks hard disk will not be altered in any way.
NST also makes an excellent tool to help one with all sorts of crash recovery troubleshooting scenarios and situations.
Enhancements:
- We are pleased to announce the latest NST release: v1.5.0. This release is based on Fedora Core 5 using the Linux kernel 2.6.18. Here are some of the highlights for this release: the NST Web User Interface (WUI), has been greatly enhanced and cleaned up; extensive additions to managing and analyzing network packet captures; the ability to setup and manage printers; the ability to easily mount many different supported file system types; the ability to manage the NST as a file server (both NFS and CIFS); the addition of the Inprotect package (a Nessus manager); the addition of the Zabbix package (another network resource monitoring tool - similar to Nagios)....
<<lessThe toolkit was designed to provide easy access to best-of-breed Open Source Network Security Applications and should run on most x86 platforms.
The main intent of developing this toolkit was to provide the network security administrator with a comprehensive set of Open Source Network Security Tools. The majority of tools published in the article: Top 75 Security Tools by insecure.org are available in the toolkit.
What we find rather fascinating with NST is that we can transform most x86 systems (Pentium II and above) into a system designed for network traffic analysis, intrusion detection, network packet generation, wireless network monitoring, a virtual system service server, or a sophisticated network/host scanner.
This can all be done without disturbing or modifying any underlying sub-system disk. NST can be up and running on a typical x86 notebook in less than a minute by just rebooting with the NST ISO CD. The notebooks hard disk will not be altered in any way.
NST also makes an excellent tool to help one with all sorts of crash recovery troubleshooting scenarios and situations.
Enhancements:
- We are pleased to announce the latest NST release: v1.5.0. This release is based on Fedora Core 5 using the Linux kernel 2.6.18. Here are some of the highlights for this release: the NST Web User Interface (WUI), has been greatly enhanced and cleaned up; extensive additions to managing and analyzing network packet captures; the ability to setup and manage printers; the ability to easily mount many different supported file system types; the ability to manage the NST as a file server (both NFS and CIFS); the addition of the Inprotect package (a Nessus manager); the addition of the Zabbix package (another network resource monitoring tool - similar to Nagios)....
Download (364.9MB)
Added: 2007-02-14 License: GPL (GNU General Public License) Price:
991 downloads
VIDeo Interface for *niX 1.0.0
VIDeo Interface for *niX (VIDIX) is a portable interface to userspace drivers to provide DGA everywhere possible. more>>
VIDeo Interface for *niX (VIDIX) is a portable interface to userspace drivers to provide DGA everywhere possible. VIDIX is portable interface which was designed and introduced as interface to userspace drivers to provide DGA everywhere where its possible.
Enhancements:
- warnings suppressing
- fixes and improvements
- Win32 related improvements
- h/w revision detection for cle266 chipset
- support for Geforce FX5500
- added vt8378 chipset as unichrome driver
<<lessEnhancements:
- warnings suppressing
- fixes and improvements
- Win32 related improvements
- h/w revision detection for cle266 chipset
- support for Geforce FX5500
- added vt8378 chipset as unichrome driver
Download (0.31MB)
Added: 2007-04-07 License: LGPL (GNU Lesser General Public License) Price:
934 downloads
Class::Interfaces 0.04
Class::Interfaces is a Per module for defining interface classes inline. more>>
Class::Interfaces is a Per module for defining interface classes inline.
SYNOPSIS
# define some simple interfaces
use Class::Interfaces (
Serializable => [ pack, unpack ],
Printable => [ toString ],
Iterable => [ iterator ],
Iterator => [ hasNext, next ]
);
# or some more complex ones ...
# interface can also inherit from
# other interfaces using this form
use Class::Interfaces (
BiDirectionalIterator => {
isa => Iterator,
methods => [ hasPrev, prev ]
},
ResetableIterator => {
isa => Iterator,
methods => [ reset ]
},
# we even support multiple inheritance
ResetableBiDirectionalIterator => {
isa => [ ResetableIterator, BiDirectionalIterator ]
}
);
# it is also possible to create an
# empty interface, sometimes called
# a marker interface
use Class::Interfaces (
JustAMarker => undef
);
This module provides a simple means to define abstract class interfaces, which can be used to program using the concepts of interface polymorphism.
<<lessSYNOPSIS
# define some simple interfaces
use Class::Interfaces (
Serializable => [ pack, unpack ],
Printable => [ toString ],
Iterable => [ iterator ],
Iterator => [ hasNext, next ]
);
# or some more complex ones ...
# interface can also inherit from
# other interfaces using this form
use Class::Interfaces (
BiDirectionalIterator => {
isa => Iterator,
methods => [ hasPrev, prev ]
},
ResetableIterator => {
isa => Iterator,
methods => [ reset ]
},
# we even support multiple inheritance
ResetableBiDirectionalIterator => {
isa => [ ResetableIterator, BiDirectionalIterator ]
}
);
# it is also possible to create an
# empty interface, sometimes called
# a marker interface
use Class::Interfaces (
JustAMarker => undef
);
This module provides a simple means to define abstract class interfaces, which can be used to program using the concepts of interface polymorphism.
Download (0.006MB)
Added: 2006-10-05 License: Perl Artistic License Price:
1115 downloads
Devolution Security 3.0.6
Devolution Security is a video surveillance system for Linux based systems. more>>
Devolution Security is a video surveillance system for Linux based systems. It supports up to 16 cameras and features unicast and multicast broadcasting, a Web interface, an X11 interface, themes, motion detection, record on motion, eight different camera layouts, camera cycling, fullscreen mode, and more. Devolution Security uses its own toolkit (dtk).
Main features:
- Up to 16 cameras
- Motion detection
- Record on motion detection
- Record up to 25 fps mpeg4 video
- Multicast live streams to local network
- Unicast to internet IP address
- Very configurable
- Themeable X11 interface
- Web based interface
<<lessMain features:
- Up to 16 cameras
- Motion detection
- Record on motion detection
- Record up to 25 fps mpeg4 video
- Multicast live streams to local network
- Unicast to internet IP address
- Very configurable
- Themeable X11 interface
- Web based interface
Download (10MB)
Added: 2005-10-26 License: GPL (GNU General Public License) Price:
1486 downloads
GNU Phantom.Security 1.00
GNU Phantom.Security is a computer-controlled security system. more>>
GNU Phantom.Security is a computer-controlled security system.
Phantom is designed to be a completely customizable computer controlled security system. All source code (C++/Bourne script) is included. Phantom was designed & tested on a Linux system, but I assume the C++ portions can be easily ported to other Unix systems (even DOS/Windows, maybe?). The Phantom Security system is for use with intrusion/fire detection equipment such as motion sensors, door magnets, and smoke detectors. However, any Normally Open or Normally Closed device may work with little or no change to the code. All source code and diagrams included are free to use,for distributing, and to modify!
Phantom.Controller is to be used in a system with non-powered security devices, i.e. door magnets. Phantom.Controller2 is for systems with powered security devices, i.e. motion sensors & smoke detectors. Anyone with a basic knowledge of circuit design can mix and match from these two diagrams to mix powered & non-powered devices!
Enhancements:
- To compile & install Phantom.Security 1.00:
- configure
- make
- make install
- The default installation directory is /home/Phantom/security. However, this can be modified in the top-level Makefile.am (if this is changed, you need to re-run aclocal, autoconf, & automake). However, both the bindir and datadir should point to the SAME directory, or else Phantom.Security wont function correctly, because it wont be able
- to find the Phantom.conf file.
Enhancements:
- Version 1.0!!! GNU Phantom.Security is out of Beta! I have been running Phantom.Security for months straight on my machine at work and believe it is stable enough to promote it out
- of Beta!
- Created HTML & PostScript versions of documentation. Available on-line.
<<lessPhantom is designed to be a completely customizable computer controlled security system. All source code (C++/Bourne script) is included. Phantom was designed & tested on a Linux system, but I assume the C++ portions can be easily ported to other Unix systems (even DOS/Windows, maybe?). The Phantom Security system is for use with intrusion/fire detection equipment such as motion sensors, door magnets, and smoke detectors. However, any Normally Open or Normally Closed device may work with little or no change to the code. All source code and diagrams included are free to use,for distributing, and to modify!
Phantom.Controller is to be used in a system with non-powered security devices, i.e. door magnets. Phantom.Controller2 is for systems with powered security devices, i.e. motion sensors & smoke detectors. Anyone with a basic knowledge of circuit design can mix and match from these two diagrams to mix powered & non-powered devices!
Enhancements:
- To compile & install Phantom.Security 1.00:
- configure
- make
- make install
- The default installation directory is /home/Phantom/security. However, this can be modified in the top-level Makefile.am (if this is changed, you need to re-run aclocal, autoconf, & automake). However, both the bindir and datadir should point to the SAME directory, or else Phantom.Security wont function correctly, because it wont be able
- to find the Phantom.conf file.
Enhancements:
- Version 1.0!!! GNU Phantom.Security is out of Beta! I have been running Phantom.Security for months straight on my machine at work and believe it is stable enough to promote it out
- of Beta!
- Created HTML & PostScript versions of documentation. Available on-line.
Download (0.26MB)
Added: 2006-07-11 License: GPL (GNU General Public License) Price:
1203 downloads
Network Security Analysis Tool 1.5
Network Security Analysis Tool is a fast, stable bulk security scanner designed to audit remote network services. more>>
Network Security Analysis Tool is a fast, stable bulk security scanner designed to audit remote network services and check for versions, security problems, gather information about the servers and the machine, and much more.
A manpage providing extensive information on NSAT has been included in the distribution. It is available after a make install, or just by typing man doc/nsat.8 from this dir. It is suggested that you inform yourself at least about the -v (scan verbosity) option and edit the configuration file. To learn about changes in this version, please consult doc/CHANGES.
New to this version is support for distributed scanning. The manpage describes how to do a distributed scan. Note that distributed scanning in this version is just a preliminary, proof-of-concept, implementation with no guarantees for its security, reliability, or performance.
Check for updated vulnerability lists, config files, etc. from
http://nsat.sourceforge.net
Currently, these are lists of vulnerabilities:
nsat.cgi (CGI scripts)
nsat.conf (configuration)
src/mod/snmp.h (SNMP community names)
<<lessA manpage providing extensive information on NSAT has been included in the distribution. It is available after a make install, or just by typing man doc/nsat.8 from this dir. It is suggested that you inform yourself at least about the -v (scan verbosity) option and edit the configuration file. To learn about changes in this version, please consult doc/CHANGES.
New to this version is support for distributed scanning. The manpage describes how to do a distributed scan. Note that distributed scanning in this version is just a preliminary, proof-of-concept, implementation with no guarantees for its security, reliability, or performance.
Check for updated vulnerability lists, config files, etc. from
http://nsat.sourceforge.net
Currently, these are lists of vulnerabilities:
nsat.cgi (CGI scripts)
nsat.conf (configuration)
src/mod/snmp.h (SNMP community names)
Download (0.40MB)
Added: 2006-07-14 License: GPL (GNU General Public License) Price:
1204 downloads
PHP Database Interface 1.0 RC4
PHP Database Interface is an easy to use PHP database interface. more>>
PHP Database Interface is an easy to use PHP database interface meant to give applications universal support across many databases, including several flat file formats.
Installation
These are just a few notes installation notes regarding DBi and using it with your project
txtSQL support requires the following files from the release archive (currently 3.0 Beta is Supported) :
txtSQL.class.php, txtSQL.parser.php & txtSQL.core.php To be placed in the 3rdparty/txtsql/ directory or the location of your choice
fileSQL support requires the the following file from the release archive (currently 1.0 RC4 is Supported) :
fileSQL.php To be placed in the 3rdparty/fql/ directory of the location of your choice
Test data and a demo script is available in the demo/ directory
Simple Example
// The filesystem root path to DBi needs to be defined before the include
define(PHP_DBI_ROOT, C:/program files/apache group/apache2/htdocs2/modules/dbi/);
define(PHP_DBI_FQL, PHP_DBI_ROOT.3rdparty/fql/fileSQL.php); //Required for FQL Support
define(PHP_DBI_TXTSQL, PHP_DBI_ROOT.3rdparty/txtsql/); //Required for txtSQL Support
include_once("../dbi.php");
$interface = dbi::factoryControllerConstruction(); //create a new dbi object
// open a connection to the database (this will example will work with any
// of the interfaced databases
$interface->open_connection_now_persistent("fql&".PHP_DBI_ROOT."3rdparty/fql/data&demo");
//Select the entire contents of test2 table and store the first row
$inteface->ExecuteQueryAndReturnRow?(array(select => *, from => test2));
$results = $interface->fetchRowThenGetAnotherrow();
//Display the first row of results
print "First Row: ";
print_r($results);
print "< br >";
$interface->disconnect_fromDatabase(); // Closes connection to the database
Enhancements:
- The tableInfo function was added to return the schema.
- LIMIT was added to select functions for supporting databases.
- LIMIT emulation is available to all database types.
- Support for the Firebird database was added.
<<lessInstallation
These are just a few notes installation notes regarding DBi and using it with your project
txtSQL support requires the following files from the release archive (currently 3.0 Beta is Supported) :
txtSQL.class.php, txtSQL.parser.php & txtSQL.core.php To be placed in the 3rdparty/txtsql/ directory or the location of your choice
fileSQL support requires the the following file from the release archive (currently 1.0 RC4 is Supported) :
fileSQL.php To be placed in the 3rdparty/fql/ directory of the location of your choice
Test data and a demo script is available in the demo/ directory
Simple Example
// The filesystem root path to DBi needs to be defined before the include
define(PHP_DBI_ROOT, C:/program files/apache group/apache2/htdocs2/modules/dbi/);
define(PHP_DBI_FQL, PHP_DBI_ROOT.3rdparty/fql/fileSQL.php); //Required for FQL Support
define(PHP_DBI_TXTSQL, PHP_DBI_ROOT.3rdparty/txtsql/); //Required for txtSQL Support
include_once("../dbi.php");
$interface = dbi::factoryControllerConstruction(); //create a new dbi object
// open a connection to the database (this will example will work with any
// of the interfaced databases
$interface->open_connection_now_persistent("fql&".PHP_DBI_ROOT."3rdparty/fql/data&demo");
//Select the entire contents of test2 table and store the first row
$inteface->ExecuteQueryAndReturnRow?(array(select => *, from => test2));
$results = $interface->fetchRowThenGetAnotherrow();
//Display the first row of results
print "First Row: ";
print_r($results);
print "< br >";
$interface->disconnect_fromDatabase(); // Closes connection to the database
Enhancements:
- The tableInfo function was added to return the schema.
- LIMIT was added to select functions for supporting databases.
- LIMIT emulation is available to all database types.
- Support for the Firebird database was added.
Download (0.033MB)
Added: 2005-10-26 License: BSD License Price:
1464 downloads
Imager::interface.pod 0.54
Imager::interface.pod decribes the C level virtual image interface. more>>
Imager::interface.pod decribes the C level virtual image interface.
The Imager virtual interface aims to allow image types to be created for special purposes, both to allow consistent access to images with different sample sizes, and organizations, but also to allow creation of synthesized or virtual images.
This is a C level interface rather than Perl.
<<lessThe Imager virtual interface aims to allow image types to be created for special purposes, both to allow consistent access to images with different sample sizes, and organizations, but also to allow creation of synthesized or virtual images.
This is a C level interface rather than Perl.
Download (0.83MB)
Added: 2006-10-27 License: Perl Artistic License Price:
1092 downloads
Network Security Monitor Daemon 4.0
The Network Security Monitor Daemon is a lightweight network security monitor for TCP/IP LANs. more>>
The Network Security Monitor Daemon is a lightweight network security monitor for TCP/IP LANs. It will capture certain network events and record them in a relational database. The recorded data is available for analysis through a CGI-based interface.
You can run test version with ./Monitord, just to see how it works. Production version should be run in background, v.g. with nohup ./monitord &. Both versions will accept a device name as a parameter (default: eth0). You can send them SIGHUP at any time to print some stats. If you send SIGTERM, SIGQUIT or SIGINT, all threads will end gracefully.
Enhancements:
- Linux Kernel with "packet sockets" and "socket filtering" support.
- GNU C Library 2 (glibc2) with LinuxThreads support. (integrated in most recent versions).
- Full MySQL, including headers and libmysqlclient_r.
- GNU C Compiler (gcc).
- GNU Make (make).
- Perl (perl).
- Wget (wget).
Enhancements:
- Added chmod 4755 ... in Makefile
- Root should run make now, but not the daemon ;-)
- The daemon will drop root privileges as soon as possible
- (after creating the raw socket with an attached linux socket
- filter and putting the interface in promiscuous mode)
- No threads run with root privileges so its much safer
- (specially the new server thread which reads remote user input)
- Added stats thread
- To calculate/mantain exponential averages
- Added server thread
- It accepts HTTP requests and serves stats in XML
<<lessYou can run test version with ./Monitord, just to see how it works. Production version should be run in background, v.g. with nohup ./monitord &. Both versions will accept a device name as a parameter (default: eth0). You can send them SIGHUP at any time to print some stats. If you send SIGTERM, SIGQUIT or SIGINT, all threads will end gracefully.
Enhancements:
- Linux Kernel with "packet sockets" and "socket filtering" support.
- GNU C Library 2 (glibc2) with LinuxThreads support. (integrated in most recent versions).
- Full MySQL, including headers and libmysqlclient_r.
- GNU C Compiler (gcc).
- GNU Make (make).
- Perl (perl).
- Wget (wget).
Enhancements:
- Added chmod 4755 ... in Makefile
- Root should run make now, but not the daemon ;-)
- The daemon will drop root privileges as soon as possible
- (after creating the raw socket with an attached linux socket
- filter and putting the interface in promiscuous mode)
- No threads run with root privileges so its much safer
- (specially the new server thread which reads remote user input)
- Added stats thread
- To calculate/mantain exponential averages
- Added server thread
- It accepts HTTP requests and serves stats in XML
Download (0.033MB)
Added: 2006-07-12 License: GPL (GNU General Public License) Price:
1203 downloads
Astaro Security Linux 7.5 Beta
Astaro Security Linux is an award-winning, unique network security solution in an integrated and easy-to-use and manage package. more>>
Astaro Security Linux 7.5 Beta offers you a wonderful and extremely useful product which is an award-winning, unique network security solution in an integrated and easy-to-use and manage package. Astaro Security Linux includes a combination of the following security applications:
- A Firewall with stateful packet inspection and application proxies guards Internet communications traffic in and out of the organization.
- A Virtual Private Network (VPN) gateway assures secure communications with remote offices, road warriors, and telecommuters.
- Anti-Virus defends computers from both email and web-bourne viruses.
- Intrusion Protection detects and stops hostile probes and application-based attacks.
- Spam Filtering eliminates the productivity drain of opening and deleting unsolicited emails.
- Surf Protection (Content Filtering) and Spyware Protection improve productivity by blocking inappropriate web activities, provide full protection from user tracking threats and violation of privacy.
Major Features:
- Protects all types of networks Windows, Linux, Unix and others.
- Delivers comprehensive features at low cost maximizing your ROI (return on investment).
- Highly effective. Has won numerous industry awards. Beat Cisco and Checkpoint in InfoWorld magazine product review, Beat IBM and Computer Associates in Linux World for Best Security Application.
- Integrated management platform features an intuitive browser-based interface and one-step updates for rapid deployment and easy management.
- Can be installed in under 15 minutes or purchased pre-installed on security appliances.
- Can start with firewall, VPN and spam protection and add other security applications as needed, seamlessly.
- Runs as a dedicated application server on top of a hardened operating system, which relieves operating system management headaches.
- Runs on systems ranging from small devices up to large multi-processor systems utilizing gigabytes of memory.
- Redundant systems can be configured to provide high availability and automatic failover in case of hardware or network failures.
- Load balancing improves performance - traffic shaping can set priorities by network, service and protocol.
- Logging, automatic backup, and diagnostic tools support high reliability.
- Free online evaluation workshop to get you started.
Enhancements:
- Major New Things:
- Intrusion Protection Performance
- Uses new version of the IPS engine
- Scales massively when used with Multi-Core CPU/Appliances
- Real-Time Bandwidth Monitor
- New Interface utilization bars on Dashboard (setup scale via QOS)
- Click for detailed overview as to "whats happening in my network right now"
- Import/Export Widget
- Gives the ability to work with manual lists for many features/fields
- Useful to import a large blacklist (for example) into the URL Blacklist
- Can been seen in many user-input boxes in Web, Mail and more. (Green Up/Down Arrows)
- Clone Objects
- Easily duplicate existing objects for quick re-use.
- Supported in most places for many objects (Definitions, Services, Certain Profiles/Actions)
- Extended Network Security Reporting
- Added Detailed Packet Filter/Firewall Reports
- Added Detailed IM/P2P Reports
- Reputation Support for Web Security
- Allows use of the trustedsource.org reputation for Web Filtering
- Documentation coming, for now visit their site/FAQ for more info on reputations
- DHCP Improvements
- Automatically map a current lease to a static assignment
- Limit DHCP leases to those with static assignments only
- Configurable DHCP lease time
- Servers retain configuration when enabled/disabled
- Multicast Routing Daemon
- PIM-SM Routing support
- More documentation on this implementation to come. Experiment with it and if it solves your needs.
- Other New Things:
- Windows SSL VPN Upgraded - New Client which supports X64 and many other options (download again via the UserPortal)
- Improved HTTP Caching - Increases hit/usage rates and makes the cache more effective.
- Quarantine/UserPortal Usability - Adds navigation to the bottom (supplementing the existing controls at the top), large amounts (250-1000) of displayed items per page, and sorting by subject line.
- Default Definition for "Internet" - Allows to specify "Internet" as an object which will exclude internal network(s) to aid policy creation (0.0.0.0/0 on Gateway interface)
- Customizable Shortcuts - Change the default Ctrl assignments to fit your preference
- Improved Definition/Services Sidebar - Mouseover now instantly shows full name and extended info to aid identifying desired object for drag n drop.
- User List shows static IPs - if assigned/configured (no need to edit in order to view)
- Live Log Negation - use to filter live logs to not show lines that match "-" entries i.e. -test to remove lines containing "test"
- Console/SSH Logins Trigger a notification - provides admin the needed insight when accessed.
- Instant Email Backup - Button for every created backup file which allows it to be sent immediately via email to configured addresses
- Custom text for notifications - Allows easier identification of which installation is sending the message. Especially useful if managing multiple sites using notifiers.
- Test NTP Sync - Button to immediately poll the configured NTP server
- Automatic Backup before Up2Date install
- Configurable Default for Lists - Allows for the amount of items per page (Packet Filter Rules, or anywhere there is a number amounts drop down) to have a larger default view
- Cluster/HA Serial Number View - Information on connected units made easier
- Schedule Firmware Installation - When an Up2Date for Firmware is available, you can schedule it to auto-install at a certain time (not a recurring setting)
- WebAdmin Network Section Split - Now two sections; "Network" and "Network Services" for usability.
- Search Boxes Retain Data - No need to re-enter query when returning from a drill down/result click.
- System Restart Reason - Allows logging of "why was system restarted" in the notification
- Group Tool tips for Members - Easily discern Network/Service Group members without having to edit in order to view
- Reporting Exclusions - Used to remove unwanted entries from various reports (such as Google-analytics from Web Security tables
- Log Flag for NAT Rules - Similar to packet filter, tells you which NAT rule was matched as part of traffic handling
- Masquerading for Additional IP Addresses - Allows the use of Masquerading (vs. just SNAT) for additional IPs bound to an interface
- Support for Multiple Authentication Servers - The authentication server section has been redesigned to support fallback/failover in an easier format, with many usability improvements
- SNMP MIB - Downloadable via the SNMP section of WebAdmin
- Up2date Status Reworked - Clarifies the current status of a Firmware Up2date to avoid confusion regarding the availability, download progress etc...of an issued Up2date.
- Inline/Snap Report Links - Directly moves the Admin to the relevant details report when browsing the embedded daily reports located throughout WebAdmin
- Global POP3 Sender Blacklist - Quarantined as "other" in the QM/EUP
- Dashboard RSS Feed - Provides visibility to select Astaro-issued items via WebAdmin
- Other magic features, enhancements, and usability improvements
Added: 2009-05-30 License: Free for non-commerc... Price: USD290.00
13 downloads
Other version of Astaro Security Linux
Astaro Security Linux 7.404 is an integrated and easy-to-use package of ... Integrated management platform features an intuitive browser-based interface and onePrice: USD290.00
License:Free for non-commerc...
License:Free for non-commerc...
security solution in an integrated and easy-to-use and manage package. Integrated management platform features an intuitive browser-based interface and onePrice: USD290.00
License:Free for non
License:Free for non
Astaro Security Linux is an award-winning, unique network security solution in an integrated ... - Integrated management platform features an intuitive browser-based interface and onePrice: $290
License:Free for non-commercial use
License:Free for non-commercial use
Price: $290
License:Free for non-commercial use
License:Free for non-commercial use
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above interface security search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
