Free imperial war museum uk software for linux

Perilar is a simple, fast computer role-playing game (CRPG), with an epic quest! You will cross a vast monster-infested wilderness to the dungeons to recover ancient weapons and artifacts, then to the dragons lairs, then face the final challenge...

Version 0.4 is a beta release for designing the gameplay, and future versions will have additional art, music, and sound effects.

Save Game Warning: Savefiles from previous versions will not be compatible with later versions until 1.0. At that point, Ill make sure they are always forward-compatible, but it hampers rapid development until then. Sorry for the trouble, but at least youll get to see the new world features in each version!

History

Over a thousand years ago, the world was a peaceful but primitive place. Humans lived in tribal societies, rarely warred, and there were few dangerous animals and no monsters. Your kingdom, Perilar, was one of the safest, as it was protected by four great dragons of Air, Earth, Fire, and Water.

Where the Vampire King came from, nobody knows. He appeared in the far north and turned peaceful farmers into berserker raiders. After conquering the island kingdom of Oradon, he turned their druids to necromancy, raising armies of the dead to war on the next kingdom. Kingdom after kingdom fell, and in each, the people were slain and raised as undead warriors to assault the next kingdom.

As the army of the undead approached Perilar, the dragons closed the kingdom off with a magical seal. For a thousand years, the kingdom has been trapped inside, and none know the fate of the outside world.

In recent times, the seals have begun to fail. The Dragons have not been seen in centuries. Undead and monsters march in towards the castle of King Phalan and the village of Perilar, home to the last free people in the world. A great hero must do something about this, and you are determined to be that hero!

GNOME War Pad is VGA Planets client for GNOME 2 desktop platform. It aims to develop a full featured client, including scripting Python support.
VGA Planets is a play-by-email space conquest strategy game, it can be played by 11 players max. This game is being played by strategy fanatics all over the world for some years now, is very addictive and there are several servers on the Internet that host various kinds of this games.
Well, first of all this game is great, I thank Tim Wisseman for his creation, secondly its very cheap to register it (I think 5 USD) and if you dont want to register it, you still can play it with some limitations. Plus, because this game was developed for DOS, almost all clients existing this days are for DOS or Windows, and since Im a GNU/Linux freak, Im tired of playing VP with dosemu, its just too slow! :-)...so thats my itch, I wanna scratch it as ESR says.
Actually, there isnt a GNU/Linux client for VP that Im aware of, I know that PCCs author, Stefan Reuther from Germany, is porting his excellent client to GNU/Linux using the SDL library, this is great! but again, GNOME deserves to have its own client, so I started this project as an excuse to learn how to program for GNOME, and also to polish my C programming skills.
This software is Free Software, released under the GNU General Public License, you may copy, modify it and redistribute it under the conditions of this license.
Enhancements:
- this is a major milestone in this projects development because now the player can make some real actions into the game! no more viewing-only! Enjoy!

Intelligent Wardialer is a "war dialer" used for auditing your PSTN (phone) network. Its features include random/sequential dialing, Voice over IP using the IAX2 (Intra-Asterisk eXchange) protocol, ASCII flat file and MySQL logging, a curses-based front end, key stroke marking, multiple modem support, several methods of "tone detection", save/load state, banner detections (to determine remote system types) and blacklist support.
Main features:
- Full and Normal logging: Full logging records all possible events during dialing (busy signals, no answers, carriers, etc). By default it only records things that we might find interesting (carriers, possible telco equipment).
- ASCII flat file and MySQL logging: You can log to a traditional ASCII flat file, and record information into a MySQL database.
- Dials randomly or sequentially.
- Remote system identification: When finding a remote modem and connecting, iWar will remain connected and attempt to identify the remote system type.
- Key stroke marking: When actively "listening" to iWar work, if you hear something interesting, you can manually "mark" it by hitting a key. You can also enter a "note" about something you find interesting.
- Multiple modem support, because... well, hey - this is "Unix". iWar will support as many modems you can hook up
- Nice "curses" based display. This means that if youre using iWar from a Linux console or a VT100 based terminal, it should work fine. Its not a escape sequence kludge, but true "curses".
- Full control over the modem: Unlike other kludges, iWar doesnt just open the modem as a typical "file". It controls the baud rate, parity, and CTS/RTS (Hardware flow control) DTR (Data terminal ready). This is important for controlling the modem and making it preform the way you want it to during scanning. For example, DTR hang ups.
- Blacklisted phone number support: For numbers the system should never dial.
- Save state: If within the middle of a "wardialing" session you want to quit, you can save the current state to a file. This allows you to come back later and restart iWar where you left off. (via the -l option)
- Load pre-generated numbers: You can load a file (via the -L option) of numbers that you want to dial. This is useful if you want to load numbers generated by another routine (perl/shell script/etc).
- Tone location, if your modem supports it. iWar uses two different methods. The traditional "ATDT5551212w;" (Toneloc) and "silence" detection.
- Records remote system banners on connection for later review
- iWar can be used to attack PBXs and Voice mail systems
- Terminal window so you can watch modem interactions and carrier results in real time
- Support the IAX2 (Intra-Asterisk eXchange) "Voice over IP" (VoIP) protocol. This allows you to scan without the need of additional hardware! To my knowledge, iWar is the first war dialer with VoIP functionality
- In IAX2 mode, iWar acts as a "full blown" VoIP client. In this mode, key 0-9, * and # play there DTMF equivalents. In this mode, you can also directly "talk" (using a microphone) with the remote target if so desired.
- In IAX2 mode, if your VoIP provider supports it, you can "set" your caller ID number (caller ID spoofing).
- Comes with complete source code and is released under the GNU General Public License.
Enhancements:
- Major bugfixes were made for BSD type systems.
- Some other minor bugs were also fixed. VoIP IAX2 (Intra-Asterisk eXchange) support was added.
- With this, you can scan with no additional hardware (such as an analog modem).
- Instead, calls are placed over the Internet.
- DTMF support for when under IAX2 mode was added.

CQL::Parser is a Perl module that compiles CQL strings into parse trees of Node subtypes.

SYNOPSIS

use CQL::Parser;
my $parser = CQL::Parser->new();
my $root = $parser->parse( $cql );

CQL::Parser provides a mechanism to parse Common Query Language (CQL) statements. The best description of CQL comes from the CQL homepage at the Library of Congress http://www.loc.gov/z3950/agency/zing/cql/

CQL is a formal language for representing queries to information retrieval systems such as web indexes, bibliographic catalogs and museum collection information. The CQL design objective is that queries be human readable and human writable, and that the language be intuitive while maintaining the expressiveness of more complex languages.

A CQL statement can be as simple as a single keyword, or as complicated as a set of compoenents indicating search indexes, relations, relational modifiers, proximity clauses and boolean logic. CQL::Parser will parse CQL statements and return the root node for a tree of nodes which describes the CQL statement. This data structure can then be used by a client application to analyze the statement, and possibly turn it into a query for a local repository.

Each CQL component in the tree inherits from CQL::Node and can be one of the following: CQL::AndNode, CQL::NotNode, CQL::OrNode, CQL::ProxNode, CQL::TermNode, CQL::PrefixNode. See the documentation for those modules for their respective APIs.

Here are some examples of CQL statements:

george
dc.creator=george
dc.creator="George Clinton"
clinton and funk
clinton and parliament and funk
(clinton or bootsy) and funk
dc.creator="clinton" and dc.date="1976"

ClanWar Planner :: Leaque project is a Clan War league administration tool.
It allows the subscribed clans to challenge each other.
It currently supports a ladder but will be extended to a complete tournament system.
It can be used for any game currently played on the Internet and features an advanced access logging facility, on-site statistics, support for many games, an advanced administration system, and different access levels for users.
Version restrictions:
- This is an unstable release which has not yet implemented all the features.
- It is recommended to use onle by developers that are interested in the functioning of it.
- It is absolutely not to be used by end-users since its yet unfinished and may lead to some problems because of missing features (the administration is not yet implemented and the only way to administer it is by using the direct manipulation of the database).
- It is however a good base to add new features easily.
- But why did you publish it then? Well it is mainly because Im currently working on the smaller version (CWPlaner::Clan), since I ran into serious problems (mainly time issues) while developing CWPlaner::Leaque. And I thought it would be a shame to waste the whole work I and Eyeball spent in developing the system.
- I therefore publish it for other developers as a base or reference for their own projects.
- When the first release of CWPlaner::Clan is out I will surely have enough time to review the entire code and the development of CWPlaner::Leaque will go on, so stay tuned :)

IIPimage is a client/server system for viewing and navigating within extremely high resolution remote images. The project is based on the Internet Imaging Protocol and is able to work efficiently even over slow dialup connections.
The server is written in C++ as a plugin for Apache, Lighttpd, or any other FCGI-enabled Web server. Images are viewed via a Java client or an Ajax Javascript client. The system can also handle 3D image sequences, panoramas, or multispectral images.
In order for the system to be as efficient as possible, the images are stored in the multi-resolution TIFF tiled pyramidal format. This allows the server to extract regions of the full image at different resolutions very quickly with little processing overhead. Image of several gigapixels in size can be stored on a central server and viewed by many different users without the need to download large amounts of data.
Main features:
- Fast lightweight Fast CGI server module that can be embedded in most web servers (Apache, Lighttpd, MyServer etc)
- Several clients available - java applet, javascript etc
- Instant dynamic generation of JPEG overviews or details at any resolution
- Allows easy viewing of extremely large images (gigapixel size) with no significant memory requirements
- Standard TIFF-based image format that can be read by many image processing tools (Photoshop, GIMP, VIPS etc)
- 16 bits per channel image handling
- Greyscale, sRGB and CIE L*a*b* colour spaces
- Panoramic 3D object image sequences
- Secure image distribution: only JPEG-compressed views of the image are sent to the client. The full-resolution image does not need to be accessible
- Example uses: high resolution museum images, geographical information systems, medical imaging etc.