Free imperial war museum north software for linux

Perilar is a simple, fast computer role-playing game (CRPG), with an epic quest! You will cross a vast monster-infested wilderness to the dungeons to recover ancient weapons and artifacts, then to the dragons lairs, then face the final challenge...

Version 0.4 is a beta release for designing the gameplay, and future versions will have additional art, music, and sound effects.

Save Game Warning: Savefiles from previous versions will not be compatible with later versions until 1.0. At that point, Ill make sure they are always forward-compatible, but it hampers rapid development until then. Sorry for the trouble, but at least youll get to see the new world features in each version!

History

Over a thousand years ago, the world was a peaceful but primitive place. Humans lived in tribal societies, rarely warred, and there were few dangerous animals and no monsters. Your kingdom, Perilar, was one of the safest, as it was protected by four great dragons of Air, Earth, Fire, and Water.

Where the Vampire King came from, nobody knows. He appeared in the far north and turned peaceful farmers into berserker raiders. After conquering the island kingdom of Oradon, he turned their druids to necromancy, raising armies of the dead to war on the next kingdom. Kingdom after kingdom fell, and in each, the people were slain and raised as undead warriors to assault the next kingdom.

As the army of the undead approached Perilar, the dragons closed the kingdom off with a magical seal. For a thousand years, the kingdom has been trapped inside, and none know the fate of the outside world.

In recent times, the seals have begun to fail. The Dragons have not been seen in centuries. Undead and monsters march in towards the castle of King Phalan and the village of Perilar, home to the last free people in the world. A great hero must do something about this, and you are determined to be that hero!

GNOME War Pad is VGA Planets client for GNOME 2 desktop platform. It aims to develop a full featured client, including scripting Python support.
VGA Planets is a play-by-email space conquest strategy game, it can be played by 11 players max. This game is being played by strategy fanatics all over the world for some years now, is very addictive and there are several servers on the Internet that host various kinds of this games.
Well, first of all this game is great, I thank Tim Wisseman for his creation, secondly its very cheap to register it (I think 5 USD) and if you dont want to register it, you still can play it with some limitations. Plus, because this game was developed for DOS, almost all clients existing this days are for DOS or Windows, and since Im a GNU/Linux freak, Im tired of playing VP with dosemu, its just too slow! :-)...so thats my itch, I wanna scratch it as ESR says.
Actually, there isnt a GNU/Linux client for VP that Im aware of, I know that PCCs author, Stefan Reuther from Germany, is porting his excellent client to GNU/Linux using the SDL library, this is great! but again, GNOME deserves to have its own client, so I started this project as an excuse to learn how to program for GNOME, and also to polish my C programming skills.
This software is Free Software, released under the GNU General Public License, you may copy, modify it and redistribute it under the conditions of this license.
Enhancements:
- this is a major milestone in this projects development because now the player can make some real actions into the game! no more viewing-only! Enjoy!

Grid Wars 2 is a space shooter arcade game.

Grid Wars2 is basically a PC version of the popular Xbox 360 game, Geometry Wars. Made by Mark Incitti, this release features less special effects compared to the original but also new controls to cater for players who do not own a dual analog joypad.

Your small ship sits in a one-screen grid and vectorized enemies spawn to attack. Use your any-directional gun to stay alive while you rake in points. Along the way a few power-ups will give you a hand, and theres always the emergency screen-clearing bomb you can unleash.

The hybrid option control allows a player to use both mouse and keyboard for ship movement as well as aiming their shots.

Intelligent Wardialer is a "war dialer" used for auditing your PSTN (phone) network. Its features include random/sequential dialing, Voice over IP using the IAX2 (Intra-Asterisk eXchange) protocol, ASCII flat file and MySQL logging, a curses-based front end, key stroke marking, multiple modem support, several methods of "tone detection", save/load state, banner detections (to determine remote system types) and blacklist support.
Main features:
- Full and Normal logging: Full logging records all possible events during dialing (busy signals, no answers, carriers, etc). By default it only records things that we might find interesting (carriers, possible telco equipment).
- ASCII flat file and MySQL logging: You can log to a traditional ASCII flat file, and record information into a MySQL database.
- Dials randomly or sequentially.
- Remote system identification: When finding a remote modem and connecting, iWar will remain connected and attempt to identify the remote system type.
- Key stroke marking: When actively "listening" to iWar work, if you hear something interesting, you can manually "mark" it by hitting a key. You can also enter a "note" about something you find interesting.
- Multiple modem support, because... well, hey - this is "Unix". iWar will support as many modems you can hook up
- Nice "curses" based display. This means that if youre using iWar from a Linux console or a VT100 based terminal, it should work fine. Its not a escape sequence kludge, but true "curses".
- Full control over the modem: Unlike other kludges, iWar doesnt just open the modem as a typical "file". It controls the baud rate, parity, and CTS/RTS (Hardware flow control) DTR (Data terminal ready). This is important for controlling the modem and making it preform the way you want it to during scanning. For example, DTR hang ups.
- Blacklisted phone number support: For numbers the system should never dial.
- Save state: If within the middle of a "wardialing" session you want to quit, you can save the current state to a file. This allows you to come back later and restart iWar where you left off. (via the -l option)
- Load pre-generated numbers: You can load a file (via the -L option) of numbers that you want to dial. This is useful if you want to load numbers generated by another routine (perl/shell script/etc).
- Tone location, if your modem supports it. iWar uses two different methods. The traditional "ATDT5551212w;" (Toneloc) and "silence" detection.
- Records remote system banners on connection for later review
- iWar can be used to attack PBXs and Voice mail systems
- Terminal window so you can watch modem interactions and carrier results in real time
- Support the IAX2 (Intra-Asterisk eXchange) "Voice over IP" (VoIP) protocol. This allows you to scan without the need of additional hardware! To my knowledge, iWar is the first war dialer with VoIP functionality
- In IAX2 mode, iWar acts as a "full blown" VoIP client. In this mode, key 0-9, * and # play there DTMF equivalents. In this mode, you can also directly "talk" (using a microphone) with the remote target if so desired.
- In IAX2 mode, if your VoIP provider supports it, you can "set" your caller ID number (caller ID spoofing).
- Comes with complete source code and is released under the GNU General Public License.
Enhancements:
- Major bugfixes were made for BSD type systems.
- Some other minor bugs were also fixed. VoIP IAX2 (Intra-Asterisk eXchange) support was added.
- With this, you can scan with no additional hardware (such as an analog modem).
- Instead, calls are placed over the Internet.
- DTMF support for when under IAX2 mode was added.

IIPimage is a client/server system for viewing and navigating within extremely high resolution remote images. The project is based on the Internet Imaging Protocol and is able to work efficiently even over slow dialup connections.
The server is written in C++ as a plugin for Apache, Lighttpd, or any other FCGI-enabled Web server. Images are viewed via a Java client or an Ajax Javascript client. The system can also handle 3D image sequences, panoramas, or multispectral images.
In order for the system to be as efficient as possible, the images are stored in the multi-resolution TIFF tiled pyramidal format. This allows the server to extract regions of the full image at different resolutions very quickly with little processing overhead. Image of several gigapixels in size can be stored on a central server and viewed by many different users without the need to download large amounts of data.
Main features:
- Fast lightweight Fast CGI server module that can be embedded in most web servers (Apache, Lighttpd, MyServer etc)
- Several clients available - java applet, javascript etc
- Instant dynamic generation of JPEG overviews or details at any resolution
- Allows easy viewing of extremely large images (gigapixel size) with no significant memory requirements
- Standard TIFF-based image format that can be read by many image processing tools (Photoshop, GIMP, VIPS etc)
- 16 bits per channel image handling
- Greyscale, sRGB and CIE L*a*b* colour spaces
- Panoramic 3D object image sequences
- Secure image distribution: only JPEG-compressed views of the image are sent to the client. The full-resolution image does not need to be accessible
- Example uses: high resolution museum images, geographical information systems, medical imaging etc.

Wars of Destiny project is a real-time strategy game with network support.

Wars of Destiny is a real-time strategy game. It is currently in a major building stage, but looks very promising. If you are interested in helping, then your assistance would be greatly appreciated. It uses SDL 1.2.0 and SDL_mixer, and it includes fully integrated network support for playing with other people over the Internet. It also includes a map creator and an easy-to-use interface for configuring WOD.

Danger from the deep (aka dangerdeep) is a Free / Open Source World War II german submarine simulation.
It is currently available for Linux/i386 and Windows, but since it uses SDL/OpenGL it should be portable to other operating systems or platforms. (If anyone whishes to port it, please contact us.)
This game is planned as tactical simulation and will be as realistic as our time and knowledge of physics allows. Its current state is ALPHA, but it is playable.
If anyone wants to contribute in development, youre welcome, just email the dangerdeep-devel mailing list. Contributing binary packages for various Linux distributions would also be much appreciated.
To get help with the game you should visit our public forum.
The game has support for multiple languages but currently only English, Italian and German are implemented. It is written in C++ with the use of the STL.
Danger from the Deep is released under the GNU General Public License. The project is hosted on SourceForge, a great supporter of the Open Source community.
Main features:
- simple main menu
- user interface (some items missing)
- basic world simulation, night and day
- realistic water and cloud simulation
- one type of destroyer, one battleship, one aircraft carrier, three subs, eight civilian ship types
- steering, firing, diving, periscope use
- free look engine for testing, periscope, UZO (aiming binoculars), bridge view
- console for logging purposes
- basic physics (acceleration, steering, firing)
- basic destroyer AI (follow, throw depth charges)
- simple vehicle preview
- mission parsing via text files, you can create your own custom missions
- tonnage recording
- log book

Claros Mini is a multi-protocol (POP3/IMAP) Web mail client with a user interface that is specially designed for devices with small screens.

Claros Mini can parse HTML and extract text to reduce the size of messages. The installation process takes less than two minutes, and no database setup is needed.

Installation:

Claros Mini install instructions are very simple and straight-forward.

1. Drop mini.war into webapps directory at Tomcat
2. Start Tomcat
3. Edit the WEB-INF/config/config.xml file, follow the instructions.
4. Restart tomcat

Thats it. You can access the Claros Mini interface with your PDA/Mobile Phone
or any other Small Screen Device at :

http://your.domain.com:8080/mini/

If you want to test it before deploying to production, you can download
Opera Browser from http://www.opera.com and use the Shift + F11 shurtcut to
emulate the Small Screen Rendering functionallity.