Free imageshack us hosting service software for linux

AlternC is a set of user-friendly hosting software. AlternC Hosting Software is easy to install and based on open-source software only.
AlternC includes an automatic installation and configuration system, and a web-based control panel to manage users accounts and web services (e.g. domains, emails, ftp accounts, statistics...)
AlternC is based on the Debian GNU/Linux system (Woody version), and it requires other softwares such as Apache, Postfix, Mailman ...
It also contains a documented API, so you can customize your web panel quickly and easily.
AlternC was initially written in French. However, the debian package includes an English version. The translation of the project into other languages such as German and Spanish is in process. Volunteers are welcome ! (See the internationalization page). The documentation is only available in French (so far).
AlternC has been created by the system administrators of Lautre Net, members of Lautre Net and Globenet.
Enhancements:
- This release continues the Debian compliance challenge.
- Quota management was corrected, bind now forbids recursion and domain poisoning, and the Debian package uses po-debconf.
- New functions were also added, such as postfix saslauthd with rimap and MySQL user rights managment in the Web desktop.
- The .eu TLD is now properly handled.

Yahoo::Marketing::Service is a base class for Service modules.

SYNOPSIS

This module is a base class for various Service modules (CampaignService, AdGroupService) to inherit from. It should not be used directly.

There are some methods common to all Services that are documented below.

See also perldoc Yahoo::Marketing::AccountService ...::AdGroupService ...::AdService ...::BasicReportService ...::BidInformationService ...::BudgetingService ...::CampaignService ...::ExcludedWordsService ...::ForecastService ...::KeywordResearchService ...::KeywordService ...::LocationService ...::MasterAccountService ...::UserManagementService

Please see the API docs at
http://ysm.techportal.searchmarketing.yahoo.com/docs/gsg/index.asp#services
for details about what methods are available from each of the Services.

Incredible Hosting System is a tool that allows you to administrate a hosting system using a Web browser.
The aim is to support administrators and users. Incredible Hosting System currently includes support for Virtual Qmail.
IHS will be a platform for implementing and integrating mail or hosting systems in different environments - small or medium companies looking for tools for managing system accounts, hosting companies offering services based on this system.
System is complex, requires integration of many other applications, for example: WWW server, mail transfer agent, FTP server, database. Also it should be possible to integrate system with other applications that are specific to companys environment.
Aside integration of existing application platform must be built that will allow to manage everything is a manner undependent from tools that are used in background. It should be a centralized and consistent environment. Also API for developers shoule be generic that changes in tools doesnt require changes in code.
Incredible Hosting System will be based on following tools, technologies:
- Apache as WWW server;
- PostgreSQL as default database;
- ProFTPD as default database;
- qmail or Virtual Qmail as a MTA;
- CORBA as a service communication protocol;
- J2EE as an runtime environment;

LaTeX Service project is a small service which converts LaTeX into an image.
It returns a LaTeX rendering of selected text as a TIFF image.
Enhancements:
- Many things could be improved, its just a 0.1 release... but it works

encFS service menu one little KDE service menu for encFS directory.

Installation:

ungzip and copy in ~/.kde/share/apps/konqueror/servicemenus

Usage:

Click on encFS directory and click on mount.

For unmounting, click on origin directory and click on umount, this unmount and remove destination directory.

READ THIS PLEASE:

This script create a directory in your home with name encFS_$DIR. For to mount correctly, this directory must not exist.

epstools service menu is used to create a tiff preview inside an eps file.

If a preview exists, it is replaced by the created one.

Thunderbird Service Menu is a service menu that will allow you to right click on a file and attach it to a new E-mail from Thunderbird.

Just extract the "AttachToThunderbirdMail" config file to "/usr/share/apps/konqueror/servicemenus" and it should work.

Configuration with no services supported script is for a single host firewall configuration with no services supported by the firewall machine itself.

Sample:

# USER CONFIGURABLE SECTION

# The name and location of the ipchains utility.
IPTABLES=iptables

# The path to the ipchains executable.
PATH="/usr/local/sbin"

# Our internal network address space and its supporting network device.
OURNET="10.5.0.0/24"
OURBCAST="10.5.0.255"
OURDEV="eth0"

# The outside address and the network device that supports it.
ANYADDR="0/0"
ANYDEV="ppp0"

# The TCP services we wish to allow to pass - "" empty means all ports
# note: comma separated
TCPIN="ssh,ftp,ftp-data"
TCPOUT="smtp,www,ssh,telnet,ftp,ftp-data,irc,http"

# The UDP services we wish to allow to pass - "" empty means all ports
# note: comma separated
UDPIN="domain"
UDPOUT="domain"

# The ICMP services we wish to allow to pass - "" empty means all types
# ref: /usr/include/netinet/ip_icmp.h for type numbers
# note: comma separated
ICMPIN="0,3,11"
ICMPOUT="8,3,11"

# Logging; uncomment the following line to enable logging of datagrams
# that are blocked by the firewall.
# LOGGING=1

# END USER CONFIGURABLE SECTION
####################################
# Flush the Input table rules
echo -n Flushing forward... && {
$IPTABLES -F FORWARD
} && echo done

# We want to deny incoming access by default.
# echo -n Denying incoming access... && {
# $IPTABLES -P FORWARD drop
# } && echo done

# Drop all datagrams destined for this host received from outside.
echo -n Dropping incoming datagrams... && {
$IPTABLES -A INPUT -i $ANYDEV -j DROP
} && echo done

# SPOOFING
# We should not accept any datagrams with a source address matching ours
# from the outside, so we deny them.
echo -n Preventing spoofing... && {
$IPTABLES -A FORWARD -s $OURNET -i $ANYDEV -j DROP
} && echo done

# SMURF
# Disallow ICMP to our broadcast address to prevent "Smurf" style attack.
echo -n Preventing SMURFs... && {
$IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET -j DROP
} && echo done

# We should accept fragments, in iptables we must do this explicitly.
echo -n Accepting fragments... && {
$IPTABLES -A FORWARD -f -j ACCEPT
} && echo done

# TCP
# We will accept all TCP datagrams belonging to an existing connection
# (i.e. having the ACK bit set) for the TCP ports were allowing through.
# This should catch more than 95 % of all valid TCP packets.
echo -n Accepting valid incoming tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -d $OURNET --dports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done
echo -n Accepting valid outgoing tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -s $OURNET --sports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done

# TCP - INCOMING CONNECTIONS
# We will accept connection requests from the outside only on the
# allowed TCP ports.
echo -n Accepting incoming tcp connections on allowed ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $ANYDEV -d $OURNET --dports $TCPIN --syn -j ACCEPT
} && echo done

# TCP - OUTGOING CONNECTIONS
# We will accept all outgoing tcp connection requests on the allowed TCP ports.
echo -n Accepting outgoing traffic on allowed tcp ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $OURDEV -d $ANYADDR --dports $TCPOUT --syn -j ACCEPT
} && echo done

# UDP - INCOMING
# allow UDP datagrams in on the allowed ports and back.
echo -n Allowing UDP datagrams in on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -d $OURNET --dports $UDPIN -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -s $OURNET --sports $UDPIN -j ACCEPT
} && echo done

# UDP - OUTGOING
# We will allow UDP datagrams out to the allowed ports and back.
echo -n Allowing UDP datagrams out on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -d $ANYADDR --dports $UDPOUT -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -s $ANYADDR --sports $UDPOUT -j ACCEPT
} && echo done

# ICMP - INCOMING
# We will allow ICMP datagrams in of the allowed types.
# echo -n Allowing ICMP datagrams in of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET --icmp-type $ICMPIN -j ACCEPT
# } && echo done

# ICMP - OUTGOING
# We will allow ICMP datagrams out of the allowed types.
# echo -n Allowing ICMP datagrams out of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $OURDEV -d $ANYADDR --icmp-type $ICMPOUT -j ACCEPT
# } && echo done

# DEFAULT and LOGGING
# All remaining datagrams fall through to the default
# rule and are dropped. They will be logged if youve
# configured the LOGGING variable above.
#

# DoS
# enabling Syn-flood protection
echo -n Enabling Syn-flood protection... && {
iptables -A FORWARD -p tcp --syn -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling Furtive port scanner protection
echo -n Enabling Furtive port scanner protection... && {
iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling ping of death protection
echo -n Enabling ping of death protection... && {
iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
} && echo done


if [ "$LOGGING" ]
then
# Log barred TCP
$IPTABLES -A FORWARD -m tcp -p tcp -j LOG
# Log barred UDP
$IPTABLES -A FORWARD -m udp -p udp -j LOG
# Log barred ICMP
$IPTABLES -A FORWARD -m udp -p icmp -j LOG
fi
#
# end.