Free how fbi recovers data from computers software for linux

The gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program called gzrecover. gzip Recovery Toolkit package is still very experimental at this point.
99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.

Secure Data Manager project is a manager for passwords and other private data.
Secure Data Manager (SDM) is a full-featured password manager application written entirely in Java (so it can run on Unix or Windows). It encrypts logins and other private information for Web sites, computers, credit cards, etc.
Main features:
- Many great features and more coming each month based on user feedback!
- No limit to how you use the product or how often!
- Trusted since you and everyone else can see the code that protects your passwords -- keeping the application clear of any trojans or bad business practices.
- Open source -- so if you know how to write code, you can add any feature you want!
- Free.

The Data Mine is a search engine designed to give users an unusually powerful interface. It is designed around human-computer intelligent interaction (making the computer a tool so humans can use their intelligence).

The project divides the screen into two halves: one lets you find all the instances of your querys keywords, and the other lets you look through a highlighted version of the results you choose.

Installation:

Basics

To install, run "./install" and answer the questions provided. This will run a Unix-flavor install-style script and should create a working, out-of-the-box installation when supplied appropriate values.

See USAGE below if are curions about how to use the Data Mine.

Setup and Customization

The Configure link at the bottom of the Data Mine search page provides a menu you can use to customize the data mine.

The main engine is intended for anyone to be able to use; the setup pages are written for techies. If you arent sure what a regular expression is, for instance, ask someone whos more technical.

Security

The present release of the Data Mine has not been closely scrutinized for security, and should be treated as such by security-conscious administrators. If you discover a vulnerability, please contact the author.

You are strongly encouraged to change the password in /usr/share/datamine/password.

The default installation sets /usr/share/datamine and contents to a relatively permissive mode. Administrators are encouraged to set directory and contents to mode 700, owned by the effective user ID that CGI scripts will be running under. This is usually apache or nobody.

Usage:

The Data Mine is designed to be run as a straightforward web application, with much administrative activity performed on-web.

Once it is set up via the Configure link, just explore.

http://[your hostname]/cgi-bin/datamine

(That is the location provided by RPM installation and the default for the provided installer. The provided installer allows you to specify another location; if you specified another location, substitute that for "/cgi-bin/furball".)

Google Data Objective-C Client provides a framework and source code that make it easy to access data through Google Data APIs.
The Google data APIs provide a simple protocol for reading and writing data on the web. Many Google services provide a Google data API.
Each of the following Google services provides a Google data API:
- Base
- Blogger
- Calendar
- Spreadsheets
- Picasa Web Albums
- Notebook
Additional services with Google data APIs that are not yet supported by the Objective-C Client Library:
- Code Search
- Google Apps Provisioning

recoverPhotos is a program that recovers digital images from camera memory cards that have been formatted or damaged.
This program relies on the fact that most photos are composed of contiguous sectors. If you tend to delete a lot of photos before a format, then you might not have very good success. But if you are like me: who reformats every time) then you fill get most of your pictures back.
This program has only been tested with a 20d. Any success stories are welcome.
HOW TO USE
To run this program I recommend you first copy the contents of the card to a file in your machine. The easiest way is to use the dd command.
Instructions:
- Connect the camera or the flashcard to the computer.
- Check what is the mount point for your camera or the flashcard. You can use the mount command for this. For example in my computer the flashcard is mounted as device /dev/sdc1
dmg@platinum recoverPhotos]$ mount
[...]
/dev/sdc1 on /media/EOS_DIGITAL type vfat ...
[...]
Now, use dd to copy the flashcard to a file. For example, this command copies the contents of my memory card to a file called /tmp/card.bytes (You might need to run this command as root).
dd if=/dev/sdc1 of=/tmp/card.bytes
Make sure the device name (in this case /dev/sdc1) is correct!
The resulting file should have the same size as the flashcard.
./recoverPhotos /tmp/card.bytes
and check the output. Hopefully you will have a bunch of photos in the current directory. Run the program without parameters to see all the options available.
CANON USERS
If you use a camera that uses the custom function "Add Decision Data" (CF18 in the D20), and you are 100% sure it was on when you took the photos, then make sure you specify the --canonADD option. The option is not critical (it is not part of the photo), but the data is there if you want to recover it.
Enhancements:
- JPEG and Canon CR2 files are supported.

DOG Data Organizer provides a bookmark organizer for various bookmark types.

DOG is a personal knowledge manager based on topic maps. It currently specializes in managing bookmarks.

It imports and exports Netscape, Mozilla, and KDE2 (XBEL) bookmark files, and it imports KDE1 bookmarks and Windows IE Favorites.

Data::TreeDumper is an improved replacement for Data::Dumper. Powerful filtering capability.

SYNOPSIS

use Data::TreeDumper ;

my $sub = sub {} ;

my $s =
{
A =>
{
a =>
{
}
, bbbbbb => $sub
, c123 => $sub
, d => $sub
}

, C =>
{
b =>
{
a =>
{
a =>
{
}

, b => sub
{
}
, c => 42
}

}
}
, ARRAY => [qw(elment_1 element_2 element_3)]
} ;


#-------------------------------------------------------------------
# package setup data
#-------------------------------------------------------------------

$Data::TreeDumper::Useascii = 0 ;
$Data::TreeDumper::Maxdepth = 2 ;

print DumpTree($s, title) ;
print DumpTree($s, title, MAX_DEPTH => 1) ;
print DumpTrees
(
[$s, "title", MAX_DEPTH => 1]
, [$s2, "other_title", DISPLAY_ADDRESS => 0]
, USE_ASCII => 1
, MAX_DEPTH => 5
) ;

Output:

title:
|- A [H1]
| |- a [H2]
| |- bbbbbb = CODE(0x8139fa0) [C3]
| |- c123 [C4 -> C3]
| `- d [R5]
| `- REF(0x8139fb8) [R5 -> C3]
|- ARRAY [A6]
| |- 0 [S7] = elment_1
| |- 1 [S8] = element_2
| `- 2 [S9] = element_3
`- C [H10]
`- b [H11]
`- a [H12]
|- a [H13]
|- b = CODE(0x81ab130) [C14]
`- c [S15] = 42