Free f prot software for linux

Xfprot project is a graphical frontend to the F-Prot Antivirus for Linux Small Business Edition 3.12b/c/d, 3.13, 4.1.0, 4.2.0, 4.3.0 and 4.3.1 by Frisk Software International (www.frisk.is) which is free of charge for personal use.

Xfprot up to and including version 0.19beta was based upon the XSTEP-3.5.1 library 1996-2001 by Marcelo Samsoniuk and collaborators and released under the LGPL license.

Starting from version 0.20beta XFPROT is based upon Gtk+ 1.2 libraries. From version 1.0-rc2 it is also possible to use the Gtk+ 2.2 libraries.

Xfprot is tested only on Linux (Mandrake 9.0 ,9.1, 9.2, 10.0) but probably should compile and work also on other distributions, on some *BSDs and on other Unixes.

QtFprot is a frontend for FPROT 4.x, a free (for personal use) Linux virus-scanner. Its similar to XFprot, but written in Qt. It allows you to set all FPROT paramters with a comfortable GUI.

These are the steps you have to do to use the program:

1. get f-prot @ http://www.f-prot.com/download/download_fplinux_personal.html
2. unpack qtfprot-0.2.1b.tar.bz2 - well you apparently already have...
3. compile, make and install (binary will be installed to /usr/local/kde/bin/)
./configure
make
make install
4. start the binary:
qtfprot

F-Spot project is an application designed to provide personal photo management to the GNOME desktop.
Main features:
- import
- export
- printing
- advanced sorting of digital images.

F-Prot Antivirus security software package has various components that help keep your system secure from viruses, backdoors, trojans and other malicious programs. The project includes the RealTime Protector, a memory-resident monitoring utility that observes all files accessed on your system, a Scheduler where you can set the Scanner to make automatic scans or updates on your system at any time and an Updater to manage all signature updates.
For home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations

flow-tools is a set of programs for processing and managing NetFlow exports from Cisco and Juniper routers. The tools included are: flow-capture, flow-cat, flow-dscan, flow-expire, flow-export, flow-fanout, flow-filter, flow-gen, flow-header, flow-import, flow-mask, flow-merge, flow-nfilter, flow-print, flow-receive, flow-report, flow-send, flow-split, flow-stat, flow-tag, and flow-xlate.

Flow data is collected and stored by default in host byte ordera nd the files are portable across every endian architectures.

Commands that utilize the network use a localip/remoteip/port designation for communication. "localip" is the IP address the host will use as a source for sending or bind to when receiving NetFlow PDUs (ie the destination address of the exporter. Configuring the "localip" to 0 will force the kernel to decide what IP address to use for sending and listen on all IP addresses for receiving. "remoteip" is the destination IP address used for sending or the expected address of the source when receiving. If the "remoteip" is 0 then the application will accept flows from any source address. The "port" is the UDP port number used for sending or receiving. When using multicast addresses the localip/remoteip/port is used to represent the source, group, and port respectively.

Flows are exported from a router in a number of different configurable versions. A flow is a collection of key fields and additional data. The flow key is {srcaddr, dstaddr, input, output, srcport, dstport, prot, ToS}. Flow-tools supports one export version per file.

Export versions 1, 5, 6, and 7 all maintain {nexthop, dPkts, dOctets, First, Last, flags}, ie the next-hop IP address, number of packets, number of octets (bytes), start time, end time, and flags such as the TCP header bits. Version 5 adds the additional fields {src_as, dst_as, src_mask, dst_mask}, ie source AS, destination AS, source network mask, and destination network mask. Version 7 which is specific to the Catalyst switches adds in addition to the version 5 fields {router_sc}, which is the Router IP address which populates the flow cache shortcut in the Supervisor. Version 6 which is not officially supported by Cisco adds in addition to the version 5 fields {in_encaps, out_encaps, peer_nexthop}, ie the input and output interface encapsulation size, and the IP address of the next hop within the peer. Version 1 exports do not contain a sequence number and therefore should be avoided, although it is safe to store the data as version 1 if the additional fields are not used.

Version 8 IOS NetFlow is a second level flow cache that reduces the data exported from the router. There are currently 11 formats, all of which provide {dFlows, dOctets, dPkts, First, Last} for the key fields.

8.1 - Source and Destination AS, Input and Output interface
8.2 - Protocol and Port
8.3 - Source Prefix and Input interface
8.4 - Destination Prefix and Output interface
8.5 - Source/Destination Prefix and Input/Output interface
8.9 - 8.1 + ToS
8.10 - 8.2 + ToS
8.11 - 8.3 + ToS
8.12 - 8.5 + ToS
8.13 - 8.2 + ToS
8.14 - 8.3 + ports + ToS

Version 8 CatIOS NetFlow appears to be a less fine grained first level flow cache.

8.6 - Destination IP, ToS, Marked ToS,
8.7 - Source/Destination IP, Input/Output interface, ToS, Marked ToS,
8.8 - Source/Destination IP, Source/Destination Port,
Input/Output interface, ToS, Marked ToS,

The following programs are included in the flow-tools distribution.

flow-capture - Collect, compress, store, and manage disk space for exported flows from a router.
flow-cat - Concatenate flow files. Typically flow files will contain a small window of 5 or 15 minutes of exports. Flow-cat can be used to append files for generating reports that span longer time periods.
flow-fanout - Replicate NetFlow datagrams to unicast or multicast destinations. Flow-fanout is used to facilitate multiple collectors attached to a single router.
flow-report - Generate reports for NetFlow data sets. Reports include source/destination IP pairs, source/destination AS, and top talkers. Over 50 reports are currently supported.
flow-tag - Tag flows based on IP address or AS #. Flow-tag is used to group flows by customer network. The tags can later be used with flow-fanout or flow-report to generate customer based traffic reports.
flow-filter - Filter flows based on any of the export fields. Flow-filter is used in-line with other programs to generate reports based on flows matching filter expressions.
flow-import - Import data from ASCII or cflowd format.
flow-export - Export data to ASCII or cflowd format.
flow-send - Send data over the network using the NetFlow protocol.
flow-receive - Receive exports using the NetFlow protocol without storing to disk like flow-capture.
flow-gen - Generate test data.
flow-dscan - Simple tool for detecting some types of network scanning and Denial of Service attacks.
flow-merge - Merge flow files in chronoligical order.
flow-xlate - Perform translations on some flow fields.
flow-expire - Expire flows using the same policy of flow-capture.
flow-header - Display meta information in flow file.
flow-split - Split flow files into smaller files based on size, time, or tags.

F Modular Synthesizer (FMS) is basically a tool to generate all kinds of sounds. It should work on any up-to-date Linux system.
Main features:
Playing sounds
- with any frequency and volume
- one after another or at the same time (mixer) or both
- stereo (different sounds on different channels)
- with any balance between the two channels
- with built-in sweep that even follows frequency modulation
- like speech synthesis [listen]
- both on-the-fly playing with direct user access and asynchronous, pre-computed output; also combining the two, taking the best of both
- with all modulation options described below
Making noise
- now although it tends to get noisy in any way, we mean real noise here
- in 4 different ways
- nearly-white noise
- narrow band noise
Modulating
- amplitude (volume)
- frequency
- minima, maxima, amplitude and frequency of the modulation (here the "Fully Modular" comes to existence)
- balance, moving the sound from left to right and back in stereo mode
- narrowness of the noise frequency band in many different ways
Making music
- some-kind-of-midi-mapping mode (sound + envelope => instrument, FMS midi file format)
- auto-converter and player for MUS file format, listen [here] (Musplay)
- auto-composer for those who like a rather modern kind of music
- chords
Displaying
- spectrum of a sound
- oscillogram of a sound
- mixes between different sounds with different volumes / frequencies
Saving
- sounds as oscillograms in FMS file format (mathematical description, not complete wavetables)
- sounds as Fourier overtone amplitudes
- music in FMS midi format
- FMS output in wave format
- wave file sounds in FMS file format (auto-converter) - experimental
GUI
- a somewhat ugly and extremely limited tcl/tk gui
- FROCOR, an installation that connects the FMS sound backend to graphical interfaces and outputs
- a fully modular Qt GUI - experimental, but Ill give you a [screenshot]
Enhancements:
- This release fixes all bugs discovered via user feedback, and should be quite stable.
- Sweep frequency modulation is now implemented, and using both blur and frequency modulation on the same sound at the same time is possible.

F-IRC provides a console IRC client.
F-IRC is an IRC client for the console. It supports multiple servers, scrollback, and all the basic features one can expect from an IRC client.
When F-IRC is started, youll see a list of channels and servers on the right.
The box around these is inverted. That means that if you use the left- and the
right cursor, they will work on the channels etc. If you press ^n, the box will
no longer be inverted and you can use the cursor keys for editting what youre typing.
If the channel-box is selected, press key right on a channel to get a list of
people in that channel. Press key left to exit this (and return to the list of
channels) or press key right on a name to get a menu via which you can kick
and ban people as well as get information on them. Press left on a server to
hide all the channels for that server, press right to unhide all channels.
Press cursor right on a channel to enter that channel. If theres a star in
front of channelname, someone wrote something in that channel. Press ^w to
jump directly to the next channel in which someone wrote something.
Enhancements:
- The cursor is finally visible in the edit-line.
- The program now runs on 64-bit platforms as well.