Free ese key daemon software for linux

ESE Key Daemon is a multimedia keyboard driver for Linux. No kernel patch is needed.
ESE Key Daemon is a userspace program which pools /dev/input/event interfaces for incoming keyboard key presses.
Enhancements:
- A bug in the configuration file handling routines was fixed.

HCSWs Ident Daemon provides a well-written daemon for faking ident replies to IRC servers.

This identd is essentially just a quick and small daemon to fake ident replies. It is primarily intended to provide random ident fields on IRC.


As of 1.1, hsidentd now natively supports IPv6. It will try listening on the same port as it does on IPv4, or 113 by default. To disable IPv6 support, edit the file hsidentd.h and comment out the line that looks like this:

#define HAVE_IPV6

Building:

Just type make

You may have to uncomment the appropriate line at the top of the Makefile.

Installing:

Just copy the executable to somewhere in the filesystem. Or dont. See if I
care.

Running:

As root, just run the hsidentd executable like so:

hsidentd

or

hsidentd

ped is a process execution daemon, comparable to cron in its basic functionality. ped daemon monitors a given directory.
If a user or an application drops a file into this directory, ped parses the content and executes a given command.
The syntax of these files describes the functionality: "[from (unixtimestamp)] [until (unixtimestamp)] [asuser (username)] start|restart|loop (command) [(parameter)]".
ped was primary written to schedule time-consuming tasks initiated by a Web application.
< u >Following keywords are valid for config/start-files:< /u >
from < unixtimestamp >
Defines the start of validity of this file.
Optional.
If this keyword is missing, start time is not checked.
until < unixtimestamp >
Defines the end of validity of this file.
Optional.
If this keyword is missing, end time is not checked.
If the < unixtimestamp > of "until" is less than a given < unixtimestamp >
of "from", the whole file is valid, but no action will take place.
asuser < username >
< username > is the name of a systemuser (do NOT use an UID here).
Optional.
If this keyword is missing, the given user not valid or has no rights
to access a valid shell, the process will start as the same user, ped
runs under (in most cases: root).
start < command > < options >
Starts < command > once in between the duration of validity. If there
is no "from" statement, starting time is seconds after the file has
been dropped in.
After attempting to start < command > the config/start-file is deleted;
nevertheless if < command > is executable or not.
restart < command > < options >
Restarts < command > in between the duration of validity (with the
built-in delay).
If the formerly started process didnt exit, it will be killed, and
a new process will spawn.
After the end of validity, this config/start-file is deleted.
loop < command > < options >
Like "restart", "loop" tries to execute < command > every (built-in
delay) seconds.
If the formerly started process didnt exit, no action will take
place, unless the formerly started process stops; if this happens,
a new instance of < command > is started.
After the end of validity, this config/start-file is deleted.
Enhancements:
- This release features better support for GNU autotools.
- Static definitions have been moved to configurable options.
- Man pages and an init script example have been added.
- A memory allocation bug was fixed.

CPQ Array Daemon project keeps on monitoring your controller and checks for abnormal conditions. By default is only reports to the syslogs, but you can make it send SNMP Traps to selected hosts.

This tool can run on a linux based intel box with a smart array controller from Compaq. It reports status changes in the disks both to the syslog and to a snmp trap host.

The default is to only log to the syslog. You can specify traphosts with the -t parameter at the commandline. Multiple traphosts are allowed. It checks for valid input, but any errors are non-fatal, in fact the traphost is just ignored..

To ensure correct opereration compile it for the same kernel that runs on the machine where you want to use this. At least make sure that the version of the SmartArray driver is the same. Strange things can happen otherwise.

Installation:

The simplest way to compile this package is:

1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system. If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute `configure itself.

Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.

2. Type `make to compile the package.

3. Optionally, type `make check to run any self-tests that come with the package.

4. Type `make install to install the programs and any data files and documentation.

5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean. There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.

Policy Daemon project is an anti-spam plugin for Postfix (written in C) that does Greylisting, Sender-(envelope, SASL or host / ip)-based throttling (on messages and/or volume per defined time unit), Recipient rate limiting, Spamtrap monitoring / blacklisting, HELO auto blacklisting and HELO randomization preventation.
Enhancements:
- Merged OSX -L < libdir > vs. -L< libdir > fix into v1.8x branch
- Added quirk for SIGPIPE on Apple
- Added quirk for some versions of NetBSD which dont have SO_NOSIGPIPE
- Added error message that if we cannot find how to handle SIGPIPE on the host platform to contact the devel mailing list
- Make "stats" command a bit better aligned
- Be paranoid bout our read buffer size check
- Better check to see if weve run out of available slots, if we have emit a warning and close connection
- Fixed potential buffer overflow when line length exceeds MAXLINE

Music Player Daemon (MPD) is a server that allows remote access for playing music (MP3, Ogg Vorbis, FLAC, AAC, Mod, and wave) and managing playlists.
Music Player Daemon makes a great desktop player with frontend options (Qt, GTK, ncurses, Windows, and Web clients are available). It is also appropriate as a console player that is scriptable, and is especially useful if X is restarted frequently.
A set of rapid development tools for clients are being developed and include a C library, Python module, PHP class, Perl module, and Java Class.
The goals are to be easy to install and use, to have minimal resource requirements, to be stable and flexible, and easy to interface.
MPD is designed around a client/server architecture, where the clients interact with MPD over a network. Thus, running MPD is only half of the equation; to use MPD, you need to install a MPD client:
Web Clients
- phpMp - Web interface written in PHP
- phpMp2 - Another web interface written in PHP
Graphical Clients
- gmpc - Gnome Music Player Client
- kmp - Graphical interface written in Qt
- MPDCon - A GNUstep Graphical interface
- glurp - Graphical interface written in GTK+
- WMmp - Window Maker dockapp
- gtk2mp - Try gmpc first! Graphical interface written in Gtk+
Command Line Clients
- ncmpc - ncurses (command line) client
- mpc - (Scriptable) command line client
- bashmp - client written as bash aliases and functions
Miscellaneous Clients
- mpcstick - Linux joystick client
- arthist - Perl client to generate a web blog of MPD activity

Music daemon(musicd) is a music playing server that supports multiple formats through plugins and multiple playlists. Musicd supports plugins to enable playing of different audioformats. The plugin-api is quite similiar to one that the popular XMMS uses. Currently XMMS-plugins are not directly supported, but if I find the time, Ill make a meta-plugin to support them.
The first reason to make the player a server is to make it possible to use many different frontends and even at the same time. You can use a GUI if you like them, but anything it can do, can be done from commandline too.
The second reason is to make sure that the GUI or X does not crash the whole player. I have found that many software with a GUI tend to crash. With musicd the player is unaffected by this and you can start the interface again.
Main features:
- Musicd has its own simple text-based protocol for player-frontend communication.
- Support for unlimited number of playlists, songs per playlist and frontends connect at the same time
- Support for both IPv4 and IPv6. Also UNIX-sockets are supported for local connections.
- Currently supported audioformats: mp3 (ffmpeg), ogg vorbis (vorbisfile) and mods (libmikmod).
- Support for OSS and Solaris ouput.
- Musicd has been tested on x86 Linux and Solaris 9.
Enhancements:
- Calling play while already playing shouldnt cause deadlocks anymore
- Load command on a file that has too long line as the last line locked up the daemon, this shouldnt happen anymore
- Invalid id3tags shouldnt give random data anymore
- Invalid filenames shouldnt crash the player anymore

X Transparency Daemon provides a daemon which uses the X.org X11 server to set the transparency of user-defined applications to user-defined values.

Installation

Install from package or source and add the following lines

xcompmgr -c -F &
transd &

to your $HOME/.xinitrc

Configuration

* System-wide configuration file: /etc/transd/transd.conf
* User-based configuration file: $HOME/.transd/transd.conf