Free epic music software for linux

EPIC4 is a new direction in ircII development. No longer is EPIC 100% backwards compatable with ircII, but instead we have chosen to find those things where compatability is undesirable, and fix them.
No gratuitous incompatabilities have been added, but lots of new code has been added to make EPIC the best ircII client we could make.
EPIC4 is derived directly from EPIC3, which was itself derived from IRC-II which is currently maintained by Matthew Green, and includes in whole all the additions included in the "plus" clients by Jeremy Nelson and all of the modifications in the "mod" clients by Jake Khuon.
EPIC is currently maintained by EPIC Software Labs (ESL), comprised of Jeremy Nelson, Jake Kuhon, Robert Chady, and a cast of a dozen others.
Main features:
- EPIC is completely safe: There are no hidden trap doors. We value your trust, and will not do anything to abuse it.
- EPIC is programmable: While ircII does contain a wide range of commands and functions, several glaring ommisions exist, which EPIC has attempted to fill, making the ircII language complete, precise, and efficient.
- EPIC supports bots: We do not agree with those who feel that script bots are all the evil of irc, and we feel that scripts bots must not be squelched by those who have the stranglehold of control on irc. EPIC will support bots for as long as we maintain it.
- EPIC is not anal retentive: EPIC allows you to do EVERYTHING that the irc protocol (RFC 1459) allows, and does not place any arbitrary restrictions upon you. EPIC *does* fully comply with the protocol as shipped and does not allow you to do anything that is deemed illegal by the protocol.
- EPIC is complete: EPIC supplies over 100 various functions and commands which allow you to do things very quickly that required very large or slow scripts in the past.
- EPIC is fully ANSI-compliant. Most current versions of the stock client do have full prototyping for all functions, which has the same net effect as the work we have done. We, however, chose to provide both a "old" style (k&r) function header and a "new" style (ansi) function header with every function and provide every extern function a prototype in a header file.
- EPIC is getting smaller and faster. Changes are continually underway to provide a faster client with more functionality while using less CPU cycles. While these may appear to be conflicting goals, the whole point of the EPIC project is to provide the best client that runs as well as can be managed.
Enhancements:
- Change the scary "ERROR --" messages to "INFO --" and hide for dcc and exec.
- Remove hardcoded limits on size of status expandos
- Built in history has been moved to a script implementation
- Translation support fixed for russian users
- Very many commands, functions, sets, moved from builtin to builtins script.
- A new "loadformats" script to use implied on hooks.
- Bug fixes and a multitude of smaller changes.

Duplicate Music Matcher is a script to quickly find duplicate MP3 files based on letter matching.
Duplicate Music Matcher is helpful for weeding out duplicates that may not be of the same encoding, format, or even the same filename.
Enhancements:
- pymad pyvorbis python-flac deps were all removed in favor of mutagen
- GUI code was updated (no more SimpleGladeApp)
- Delete key have been bound in the GUI
- More accurate matching for ogg and flac files
- The filename column is now resizable
- The GUI play and stop buttons now use audacious.FLAC should now also give a length value
- Some oggs might have a huge bitrate value due to a bug in mutagen.

Random Music plays random MP3 tracks from your music collection. It maintains a flat database of tracks, detailed genres, and weights, and generates a weighted random playlist from the user-selected genres.
The ID3 and ID3v2 fields (title/artist/album), detailed genre, and weight (0-9) for the currently-playing track can be edited, and tracks can be removed from the playlist.
For example, a user can select only tracks with a minimum weight of 5 from the subgenres "Pop - 1970s" and "R&B - 1970s", and the playlist will adjust accordingly.
Enhancements:
- This release adds features to the playlist editor.
- Playlist entries now include the album name, and selected tracks can be moved up or down.

aeon is a music player that is meant to look nice and have an interface that is as easy to use as possible.

In contrast to BMPx it is entirely library based, which means you cant add individual files to it, but you have rather to add them to the library beforehand.

You can only play files from the library (akin to RhythmBox/iTunes).

PyMusicD is yet another jukebox daemon written in python. It was born out of my frustration with the current mp3 jukeboxes, mostly the lack of features that I want. Ive also been playing with python quite a lot lately, and this is my first attempt at a large project in python.
The player is being written to satisfy my own requirements for a car mp3 player, although theres no reason you couldnt use this for a home mp3 player, or work mp3 player.
It assumes that your network users are (mostly) benign, and doesnt take a lot of precautions against malicious users who want to screw with your mp3s. Take appropriate measures to only allow trusted users to play with it, at least until I secure it a bit better.
Its primary purpose is to run in the background, and play mp3s whenever they are in the playlist.
Usage
Unpack this to its own directory. Edit the pymusicd.conf file to your liking. Run python PyMusicD, then run python pymusic to play around with it. The client operates very similarly to most shells, and includes tab completion for commands (but not arguments... yet.)
If you wish to install this to the system, you may do so by running python setup.py install. This will install the server binary in the default place for your platform (according to distutils.) You may then edit the config file (/etc/pymusicd.conf by default) and run the server by running PyMusicD. The cli client will be named pymusic.
This software is currently in development. It is not ready for end users yet. You should have familiarity with scripting in python before you set about to use this software. That being said, if you find bugs that arent listed in TODO, and/or have problems with the software that arent listed in TODO, email me (zwhite@darkstar.frop.org) and Ill see what I can do to help you. Code patches/suggestions are always welcome.
This is known to work on my Slackware 9.0 machine using the Python 2.2.2 package that came with it. I have also tested it on my Mac OSX 10.2.8 machine with Python 2.2. I have no reason to believe that it wont work on any machine with a Python 2.x interpreter and
either mpg123 or mpg321. Your mileage may vary. If it doesnt work on your platform, please let me know. My goal is to have this work on any platform that python runs on.
Enhancements:
- Fixed a bug when adding an entire directory with %2A instead of *
- Added a debug command to get server state, currently only playstatus is reported, will add more as needed.
- Changed the way the stop command works to eliminate a bug.
- Check to make sure a file exists before we add it to the playlist.
- We no longer start playing music as soon as the playlist has entries.
- Instead, we wait for a play command to be issued.
- Added config file support. Defaults to /etc/pymusicd.conf or ./pymusicd.conf
- Added a setup.py and setup.cfg file. Now users can install PyMusicD using the standard "python setup.py install" method that other scripts and modules use.

The iPod Music Liberator allows you to copy music from your iPod to any computer, filling in a missing feature of iTunes. You see, iTunes only allows for a one way transfer of music from your computer to your iPod.
But what if you want to move music to another authorized computer? What if you want to make a backup of your music? What if your computer crashes and you lose all of the music on your computer? What if you buy a new computer and need to move your music? What if ... ? Use the iPod Music Liberator for all of your iPod music copying needs.
Main features:
Organized Copying
- Simply copying music from your iPod to your computer is not enough. The iPod Music Liberator allows you to automatically organize your music into folders labeled by artist and album. The iPod Music Liberator also allows you to place all of your music into one folder. Combined with the powerful searching capabilities detailed below, you can organize your music into folders any way you like.
Intelligent Copying
- Dont waste your time copying songs that are already on your computer. iPod Music Liberators intelligent copying feature allows you to copy only the updated songs from your iPod to your computer. This is crucial for people that do regular backups or want to keep syncronized music collections.
Powerful Searching
- Maybe you only want to copy songs from a specific artist, album, or genre. iPod Music Liberators powerful searching capabilities allows you to search "on-the-fly." This means your search is refined with every key you type just like in iTunes.
- Dont let the searching power end there. You can also simply click on any table header to get an alphabetical or reverse alphabetical listing.
Simple User Interface
- Dont let complex user interfaces get in the way of your productivity. The iPod Music Liberator has a simple user interface to allow easy navigation.
Quick Song Listing
- Why wait for a program to find the songs on your iPod when you could be copying songs? The iPod Music Liberator uses the iPods own internal database to quickly list your songs.
Music Player
- Dont have iTunes installed to play music directly from your iPod? Let the iPod Music Liberator do it for you. Whether youre refreshing your memory about which song you want to copy or playing music for friends, the iPod Music Liberator can directly play your music from your iPod.

Goggles Music Manager is a music collection manager and player. Goggles Music Manager allows you to easily manage your music collection.

Each song in your collection is organized according to Artist and Album. As of now, Goggles Music Manager supports Ogg Vorbis and MP3 files.

CMus is a small and fast music player using the ncurses library. CMus has vi-style command interface, e.g. searching using / or ? and adding files to playlist :add ~/foo.ogg.
Main features:
Input
- FLAC
- Ogg/Vorbis
- MP3 (libmad)
- Wav
- Modules (libmodplug)
Output
- ALSA
- OSS
- ARTS
- MP3 and Ogg streaming (Shoutcast/Icecast)
- WinAmp / XMMS keys "zxcvb"
- Can be controlled via UNIX socket
- Serial port remote controller support (irman)
- Customizable colors
- Nice vi-style interface with tabulator expansion
- Background playlist loading
- Track metadata database makes adding files to playlist very fast.
- Album/artist modes. Playing within one album or artist.
- Playlist is always kept sorted.
- Play queue
- Directory browser
- Full UTF-8 support
Enhancements:
- This release adds long-awaited replaygain support, Cygwin support, and three new commands: prev-view (switch to the previously used view), tqueue (enqueue random tracks), and lqueue (enqueue random albums).
- An ffmpeg plugin was added for WMA support along with wavpack and Windows waveout plugins.
- Many bugs were fixed.