Free eddie tool 0.37.3.1 software for linux

The EDDIE Tool is a system monitoring, security and performance analysis agent developed entirely in Python. It runs standalone on a system and performs checks and other actions as defined by an extensible configuration.
The EDDIE Tool can perform all basic system monitoring checks, such as: filesystem; processes; system load; and network configuration.
It can also perform such network monitoring tasks as: ping checks; HTTP checks; POP3 tests; SNMP queries; RADIUS authentication tests; and customized TCP port checks.
Finally, a few checks lend themselves to security monitoring: watching files for changes; and scanning logfiles.
The EDDIE Tool can also send any collected statistic to RRD files to be displayed graphically by any standard RRD tool.
No need to run multiple monitoring and data collection agents. Monitoring rules are just like Python expressions and can be as simple or as complex as needed. Advanced alert control functionality such as exponential back-off and dependencies are also standard.
Enhancements:
- Support for two new platforms: FreeBSD and Microsoft Windows. Solaris 10 support.
- Better support for Linux kernel 2.6.
- SMTP response time monitoring.
- The FILE directive can show diffs when monitored files are modified.
- Disk/filesystem throughput measuring on Solaris.
- Many more enhancements and bugfixes.

Redirection Tool is a product for Plone used for storing references to moved content to enable redirects.
The Redirection Tool can be used for storing references to moved content to enable redirects, or it can be used for giving objects multiple URLs (aliases). If a page is not found, the tool looks at its list of redirects to see if there is a match, and if so, it redirects to that page.
Future plans include a more intelligent 404 handling, where the tool would either search for alternative pages based on the components of the requested URL and automatically redirect if there is only one hit, otherwise display a limited number of hits, or alternatively chop off URL components until it finds an object that can be published to the user.
Enhancements:
- Added Plone 2.1 compatibility.

eddiebrowser project is a CGI program that provides an interface to view system statistics graphically using RRDtool.

eddiebrowser is written in 100% Python and is designed to work with EDDIE Tool and ElvinRRD, although it can be used standalone or with other software, as long as they generate RRD files.

eddiebrowser provides a dynamic interface to browse RRD graphs of system performance statistics. The data is grouped by hostname and all available hosts are automatically read and presented for display.

Cycling through hosts is easy to do, as is viewing data for different time periods - defaulting to: hourly, daily, weekly, monthly, yearly. eddiebrowser is part of the EDDIE Tool monitoring project.

DREAM Tool is a generic framework that aims at providing a common semantic domain which can express several (real-time, power consumption, resource) constraints.
The semantic domain has an executable C++ model which has been semantically anchored to the hybrid automata formalism. Although the model of computation corresponds to hybrid automata, so far we have been successful in analyzing the models by conservative approximation using timed automata on moderate size systems.
To deal with large-scale examples the user has the ability to use the simulation/testing interface on the executable C++ model before implementing the system. We plan to extend the genetic algorithms to solve a large number of problems.
DREAM is a simulation and verification framework which provides a formal model and analysis of your system in less than a day. Systems in DREAM are specified using XML in a straightforward way. I hope you find it useful.
Real-time middleware provides dependable and efficient platforms supporting key functional and quality of service (QoS) needs of distributed real-time embedded (DRE) systems.
Key challenges in DRE system developments include safe composition of system components and mapping the functional specifications onto the target platform. Model-based technologies help address these issues by enabling design-time analysis and providing the means for the rapid evaluation of design alternatives with respect to end-to-end QoS properties, predictability and performance measures before committing to a specific platform.
The Distributed Real-time Embedded Analysis Method DREAM is an open-source tool and method for optimizing multiple quality of service (QoS) properties of distributed real-time embedded (DRE) systems. The project focuses on the practical application of formal analysis methods to real-time middleware to automate the verification, development, configuration, and integration of middleware-based DRE systems.
Enhancements:
- This version implemented several optimizations for improved model checking performance, resulting in impressive performance gains of at least 2-3 times.
- There are no known memory leaks present in the current release.
- Balanced AVL trees are now used, resulting in exponential speedups in several steps of the model checking method.
- XML Schema validation was implemented.
- Verification time reporting was upgraded to include data on the simulation speeds.
- Random simulation-based testing now provides an execution trace when a deadline is missed.

The 3dfx TV Out Tool tries to be the well-known TV Tool for the 3dfx VooDoo3 cards. It might work on other cards based on the bt869 chip, since it uses the bt869 lm_sensors module.

Simply typing make or make all should get you started and create an executable 3dfx_tvtool which you simply run AFTER you loaded the appropiate modules (if you built it into the kernel (which isnt a bad idea if you use your tv-out a whole lot) then you dont have to load the modules again). ALSO!! Patch your lm_sensors. In the extra dir I included 2 patches for lm_sensors package, youll need those patched or you wont get luma (brightness) and chroma (color) control at all. (The buttons will simply dissapear) If you have a rescent CVS version it MIGHT be in there allready. Just load the modules and see if there exists a luma and a chroma entry in /proc.


Colorbars On/Off: Enables/Disables the colorbars. TV Out: Enabled/disabled Enables/disables the TV-out function. TSC/PAL: put the system on NSTC/PAL mode.
Re-apply: update the kernel with your settings in case you did it too fast. Save: Saves your current kernel settings (all of them) to the default save file. Load: Loades your default file and applies its settings to the kernel. Quit: Quits the application.

Bugreports should go to oliver@are-b.org aswell as any other feedback. Oh one more thing, if you like this program, contributions can be sent to me aswell.

Thanks go out to all members of the Collective, but mostly mrfloppy, for beeing a good friend, phirox for helping me with my basic programming skill and last but not least mastex and thehatter wassup dudes.

Iso9660 Analyzer Tool is a project that will detect the structure of CD images.
iat (Iso9660 Analyzer Tools) is a tool for detecting the structure of many types of CD-ROM image file formats, such as BIN, MDF, PDI, CDI, B5I, and more.
Compile with:
$ gcc -o iat iat.c
Run with:
$ ./iat IMAGE.bin IMAGE.iso
Version restrictions:
- This is pre alpha version of iat, use this programme only for send me log of your image
Enhancements:
- This release resolves a problem with images and adds support for NRG images.

MIME-tool is a little mime encoding tool I slapped together when I needed something on a production box at work (productions = no C development environment, only the ancient K&R compiler required for god-knows-what sys-admin task).
The resulting program will compile happilly on both the crippled C compilers bundled with some commercial *nix distributions, and on full ANSI/ISO C compilers like gcc.
I wrote this program when I needed a tool to construct MIME encoded emails with file attachments in job scripts on a production box. Being a production box it didnt have any development tools installed. However, the box DID have a K&R C compiler that appears to be necessary for some administrative task or another (configuring the kernel?). If you tried to compile even fairly simple ANSI/ISO C source the compiler bitched and moaned about all the stuff it didnt support, which will stop most folk (at least those who dont know anything about the history of the C programming language) from building their own binaries.
Since Im old enough to actually have written C code back before we had the ANSI/ISO standard and all the accompanying niceties, I was not stymied by a the lack of ANSI/ISO support. Its really not all that hard to write K&R compliant code, so long as you dont need the compiler to check your function calls for you. For a program this small, however, thats not much of a concern.
Since the program is meant to be compiled on systems with minimal support (there is no telling what unrestrained IT staff will decide must be removed in the interest of system security) I didnt bother to include a makefile. On every system I have tried, however, the program compiled with the simple incantation
cc -o mime mime.c
but your selected target system may require extra special magics.
The program supports the basic MIME standard: The caller can select the content type (application/octet-stream, text/plain, or user specified), content type encoding (7bit, 8bit, binary, base64 or auto-detected) and the boundry string (defaults to "=_MIME_CONTENT_BREAK_="). Further, the caller may specify the e-mail subject, to address, from address, carbon copy address and text for a prolog and epilog. The content type and encoding may be specified separately for each attached file.
The programs calling format is:
mime [-dDvV] [-S subject] [-F from-address] [-T to-address]
[-C carbon-copy address] [-P prolog-text] [-E epiplogue-text]
[-B boundry] {[-78abqux] [-t content-type] filename}
-d low detail debugging
-D high detail debugging
-v verbose messages
-V very verbose messages
-7 7-bit ASCII encoding
-8 8-bit ASCII encoding
-a application/octet-stream content type
-b binary encoding
-q quoted-printable encoding
-t text/plain content type
-u unknown encoding, auto-detect
-x base64 encoding
Theres really not much to this program. Once you know how the MIME messages are constructed you could do most of it manually (except for the base64 encoding, which would require a program like this), but if there are any problems with it, I would like to know about them.
Enhancements:
- A typo in the online help message was fixed.
- A known bugs section was added to the manpage.
- Proper quoting and folding were added to the filename header.