Free dvd9 to dvd5 software for linux

Add to Noatun playlist is a service menu that can add files to the Noatun players playlist.

RIR to DNS converter is a tool to convert Regional Internet Registry data to a DNS country lookup zone. You can use it to build your own DNS zone for looking up country codes from IP addresses.

It uses data directly from RIPE, ARIN, APNIC, LACNIC, and AFRINIC. The data can be updated on a schedule of your choosing.

The input data comes from:

ftp://ftp.afrinic.net/pub/stats/afrinic/delegated-afrinic-latest
ftp://ftp.apnic.net/pub/stats/apnic/delegated-apnic-latest
ftp://ftp.arin.net/pub/stats/arin/delegated-arin-latest
ftp://ftp.ripe.net/pub/stats/ripencc/delegated-ripencc-latest
ftp://ftp.lacnic.net/pub/stats/lacnic/delegated-lacnic-latest

The input data format is described in:

http://www.apnic.net/db/rir-stats-format.html

The output is a BIND 9 zone file that can be used to look up country codes
in a similar fashion to in-addr.arpa. For example, to find out what country
203.30.47.58 is:

host 58.47.30.203.rir.example.com
58.47.30.203.rir.example.com has address 127.0.65.86

where 65 and 85 are ASCII for A and U, which means 203.30.47.58 is
in Australia (AU).

HOW TO USE IT

Just feed it the above delegated- -latest files into stdin and it will
spit out the zone file to stdout. The zone file will only have the IP addresses,
so you could $INCLUDE it into a zone file that contains NS records, SOA, $ORIGIN,
etc.

WHY USE IT

You dont need the resolution of MaxMinds GeoIP database, but you do want
something that is free and you want it kept up to date on a schedule that
you decide.

You could use this to block or tag email based on countries, block or redirect
visitors to your website based on end-user country, and so on. Be very
careful about blocking mail this way, though, as you may block legitimate
email. Instead of blocking outright, use it in a SpamAssassin rule to add
something to the spam level, based on where the email comes from.

HOW IT WORKS

The RIR files contain ranges of IP addresses, and indicate what CC each range is allocated to. At the simplest level, rir2dns just sorts the ranges then iterates
through the IPs in each range and generates a reverse-dns-style A record that
represents the country code.

HOW IT WORKS - IN DETAIL

Rather than iterate through each IP address, the program tries to skip through
entire classes at a time (256 IPs, 65536 IPs, etc). Rather than iterate
through each IP, the loop iterates through classes or IP ranges (whichever are
smaller at the loop control), using control-breaks to accummulate neighbouring
ranges where possible so that entire classes that are in the same country dont
generate huge numbers of records.

Firstly, IPs are considered to be 4-digit numbers, but in base-256. In other
words, each octet is dealt with as if it were a single base-256 digit. This
turns out to be convenient because optimisations of large chunks of IP space can be done by looking for places where least-significant base-256 digits are zero.

Next, IP ranges are broken down into the following sub-ranges:

Optional individual IP addresses (ie: 4 octets)
Optional A-class ranges (ie: 3 octets)
Optional B-class ranges (ie: 2 octets)
Optional C-class ranges (ie: 1 octet)
Optional B-class ranges (ie: 2 octets)
Optional A-class ranges (ie: 3 octets)
Optional individual IP addresses (ie: 4 octets)

Considering that there is a pattern here, Im sure theres an elegant way to
handle breaking this down into two loops (one reducing the octets and one
increasing the octets), but I cant be bothered, so Ill break it down into
seven loops. Kind of hard-coded, but at least its simple.

For ease of processing, the IP addresses are actually converted to 32-bit numbers, then back again. This simplifies mathematics and looping through ranges.

Thats pretty much it, really...

Note that currently there are about 80,000 RIR records between all five
registries. This takes about 35 seconds on a 2.4GHz P4 to process, and
generates a 26MB file with around 3/4 million lines (RRs). This causes BIND
to use about 100MB or so of memory, and on a slow machine will probably cause it to take too long to reply, while it searches the zone. That size zone can
take a minute or two to load, which is quite a while.

Basic algorithm:

Read & process RIR data:

Read RIR ranges
Sort RIR ranges by start IP address
Glue together contiguous ranges of the same country

For each range

Generate the IPs at the start of the range

Generate the A-classes at the start of the range

Generate the B-classes at the start of the range

Generate the C-classes in the middle of the range

Generate the B-classes at the end of the range

Generate the A-classes at the end of the range

Generate the IPs at the end of the range

Lxdvdrip is a command line tool to make a copy from a video DVD. It automates the process of ripping, authoring, previewing, and burning the DVD.
Lxdvdrip project uses tools like mplayer, transcode, streamdvd, dvdauthor, and growisofs. You can backup the main feature or the whole DVD.
Main features:
- Automatic Selection of the longest Title
- Automatic Calculation of Factor to Requant
- Automatic Read of Volume-ID
- Automatic Chapter Separation from Original
- Ripping of Audiotracks in every Language
- Selection of dts-Audiotracks as Default
- Selection of two Subpicture-Tracks possible
- Ripping and Re-Authoring
- Preview of VOB-Files with mplayer or xine
- Burning with growisofs or cdrecord-prodvd
- All Program Parameters could be stored in a Config File as Program Defaults
- All Paramaters can be overwritten on the fly at the Command Line
- Program with english, french or german Messages
- Rip of Subpicture-Tracks
- Copy DVD smaller than a DVD-R 1:1 with Menus, > 4.7 GB with vamps, without Menus.
- Partial Copy: Copy selected Titles from a DVD (dvdunauthor/vamps)
- High Quality Backup (1 DVD9 => 2 DVD5)
- DVD with Menus for Title-, Audio- and Chapter Selection (dvdwizard)

C to C++ is a Python script that converts C code to C++ code.

The main program is ctocpp.py that performs successive stages for converting C to C++. A script, ctocpp gives it as parameter to the python interpreter with options you add.

The archive also includes scripts that may help you:

- mover.py changes the location of a project.
- search.py performs searches and replacements.
- mkheader.py corrects a header file.

The C to C++ program with all the python sources is under the GNU GPL license,
that minds you may use it and distribute it freely, providing the copyright is unchanged.

See at the COPYING file for details. This doesnt mean GNU encourages you to convert your C sources to C++. In fact, most of the tools here included may help C programmers outside C++ conversion.

Installing:

Type:
./configure
./setup
mkdoc ...this will generate an html and info manuals.

Send to Coppermine is a service menu for send a jpeg/gif/png file to a Coppermine gallery install.

The add-on has been tested on Fedora core 2 and 3 (should work with FC4)

PNG and GIF support depends on your coppermine settings.
You can add keywords and description for the image while uploading.

This add-on requires the Coppermine API which we have already released.

The attached tarball contains a copy of API and two other files needed.

Installation:

1. Untar the attached tarball.
2. Copy the api folder to your coppermines root directory.
3. Copy kdesh to your home directory.
4. Copy Send2Coppermine.desktop to your/home/.kde/share/apps/konqueror/servicemenus (create servicemenus folder if not already there)
5. Now open kdesh in your favourite editor and modify the values of aid, username, password and URL to your coppermine installation.

Currently, the album id where photo is uploaded needs to be hardcoded in this file. The future version may allow choose album for each picture.

OBEX Send to Phone service menu allows for sending any file(s) to a mobile phone equipped with OBEX stack.

It is made for Nokia S60 (6630 to be precise) phone with USB connection. There are no settings, no progress indicator. Files are copied to the memory card (E: drive)

Requires openobex and obexftp.

Hope this script might be useful for someone. Please post fixes, comments and suggestions.

KAddressBook to iPod Synchronisation lets you synchronise your KAddressBook to your iPod by executing this simple script.

The script makes a few modifications to the addressbook file to make it readable by the iPod.

Amarok recently released the ability to synchonise music to your iPod, so I was finally able to stop using iTunes to transfer my songs. However I was still stuck using the Mac to sync my addressbook.

Well not anymore, after some quick poking around, and a simple script, I am now able to transfer my complete KDE addressbook (including photo), with a simple command line.

Just mount the ipod, and execute the script, passing the ipod’s root directory as a parameter. That’s it! The script loads your KDE addressbook, makes a few simple modifications the iPod requires, and copies it across.