disk drives disappeared
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 1723
FDMS-3 Ripper
FDMS-3 Ripper is a Perl program for extracting the tracks from the FDMS-3 filesystem. more>>
FDMS-3 Ripper is a Perl program for extracting the tracks from the FDMS-3 filesystem. I recently bought a Fostex FD-8 multitrack hard disk recorder for recording music. It works great, but I was disappointed to discover that, although it uses a standard external SCSI hard disk, there was no way to "rip" the recorded tracks from the hard drive to my PC over the SCSI port. The alternatives were to use the analog-out to re-record each track using my soundcard (resulting in loss of quality and loss of synch between tracks), or buying a $500 ADAT card for my PC.
I decided that I would try to figure out a way to rip the music directly over the SCSI port. The FD-8 uses a proprietary Fostex filesystem, FDMS-3. I decided to hook it up to my PC and probed the drive. I was able to figure out the basic layout of the filesystem pretty quickly. Note: this is designed to hard disks formatted in the FDMS-3 "Mastering" mode, which stores the audio data in uncompressed format.
In order to use the program, you will need to take the hard disk that has the FDMS-3 filesystem on it and hook it up to your PC (mine is a SCSI drive -- dont know if this will work with one of the internal IDE drives you can hook up to the FD-8). Make sure that Linux can see the drive (dont try to mount it, though!). You might want to have a look at SCSI-2.4-HOWTO to get the drive recognized. My external hard disk is located at "/dev/sda", but yours could end up elsewhere.
Next, you need to make sure you have the following on your system: perl, sox and fileutils (for the "dd" utility). Security Warning Unfortunately, this program presents significant security issues, so be careful with it. The script needs to be able to access the hard disk directly, so you can either run it as root (not safe), or change the permissons for the hard disk device (in my case, "/dev/sda"). Run the program with "./fdms3rip /dev/sda" (substituting the actual location of your hard disk).
This will list all of the programs present on the hard disk. Then, run it again with the number of the program you want to fetch off the hard disk: "./fdms3rip /dev/sda 5" to get all of the recorded tracks for program number 5. After waiting a bit, you should now have a bunch of WAV files on your Linux machine. Warning This program will create and erase files with the names "dir" and "header" in the directory it is run from. It would be best to run this program from a clean directory, just to make sure there are no problems.
<<lessI decided that I would try to figure out a way to rip the music directly over the SCSI port. The FD-8 uses a proprietary Fostex filesystem, FDMS-3. I decided to hook it up to my PC and probed the drive. I was able to figure out the basic layout of the filesystem pretty quickly. Note: this is designed to hard disks formatted in the FDMS-3 "Mastering" mode, which stores the audio data in uncompressed format.
In order to use the program, you will need to take the hard disk that has the FDMS-3 filesystem on it and hook it up to your PC (mine is a SCSI drive -- dont know if this will work with one of the internal IDE drives you can hook up to the FD-8). Make sure that Linux can see the drive (dont try to mount it, though!). You might want to have a look at SCSI-2.4-HOWTO to get the drive recognized. My external hard disk is located at "/dev/sda", but yours could end up elsewhere.
Next, you need to make sure you have the following on your system: perl, sox and fileutils (for the "dd" utility). Security Warning Unfortunately, this program presents significant security issues, so be careful with it. The script needs to be able to access the hard disk directly, so you can either run it as root (not safe), or change the permissons for the hard disk device (in my case, "/dev/sda"). Run the program with "./fdms3rip /dev/sda" (substituting the actual location of your hard disk).
This will list all of the programs present on the hard disk. Then, run it again with the number of the program you want to fetch off the hard disk: "./fdms3rip /dev/sda 5" to get all of the recorded tracks for program number 5. After waiting a bit, you should now have a bunch of WAV files on your Linux machine. Warning This program will create and erase files with the names "dir" and "header" in the directory it is run from. It would be best to run this program from a clean directory, just to make sure there are no problems.
Download (0.005MB)
Added: 2006-07-21 License: GPL (GNU General Public License) Price:
692 downloads
FIRST DiskImager 1.0
FIRST DiskImager is an advanced, full-featured GUI disk image acquisition tool. more>>
FIRST DiskImager is an advanced, full-featured GUI disk image acquisition tool.
It was designed for forensic disk image inspection. Developed using C++ and QT. This is our 1st attempt to create an acquisition software to meet the NIST standards.
******** WARNING !!! USE THIS SOFTWARE AT YOUR OWN RISK!!! **************
Ive tested and used the software and it works for me, but there is no guarantee that it will work for you. You can very easily DESTROY DATA IRRECOVERABLY by using this software. Do not even attempt using this software unless you are VERY FAMILIAR with the process of imaging hard drives and other media. While this program is intended to make the imaging
process more convenient, it cannot THINK for you. If you mix up the source and destination targets and accidentally overwrite the original evidence, there is nothing I (or anyone else) can do for you.
DO NOT USE THIS SOFTWARE FOR ACTUAL PRODUCTION OR CASE WORK UNTIL YOU HAVE THOUROUGHLY TESTED IT AND HAVE SATISFIED YOURSELF THAT IT DOES WHAT YOU WANT IT TO DO. I WILL NOT BE RESPONSIBLE FOR UNEXPECTED RESULTS OBTAINED FROM THE USE OF THIS SOFTWARE WHETHER THEY ARE THE RESULT OF PROGRAM BUGS, USER ERROR, HARDWARE FAILURES, OR ACTS OF GOD. AGAIN, IF YOU USE THIS SOFTWARE YOU DO SO AT YOUR OWN RISK AND ASSUME ALL RESPONSIBILITY FOR THE RESULTS.
***************************************************************************
<<lessIt was designed for forensic disk image inspection. Developed using C++ and QT. This is our 1st attempt to create an acquisition software to meet the NIST standards.
******** WARNING !!! USE THIS SOFTWARE AT YOUR OWN RISK!!! **************
Ive tested and used the software and it works for me, but there is no guarantee that it will work for you. You can very easily DESTROY DATA IRRECOVERABLY by using this software. Do not even attempt using this software unless you are VERY FAMILIAR with the process of imaging hard drives and other media. While this program is intended to make the imaging
process more convenient, it cannot THINK for you. If you mix up the source and destination targets and accidentally overwrite the original evidence, there is nothing I (or anyone else) can do for you.
DO NOT USE THIS SOFTWARE FOR ACTUAL PRODUCTION OR CASE WORK UNTIL YOU HAVE THOUROUGHLY TESTED IT AND HAVE SATISFIED YOURSELF THAT IT DOES WHAT YOU WANT IT TO DO. I WILL NOT BE RESPONSIBLE FOR UNEXPECTED RESULTS OBTAINED FROM THE USE OF THIS SOFTWARE WHETHER THEY ARE THE RESULT OF PROGRAM BUGS, USER ERROR, HARDWARE FAILURES, OR ACTS OF GOD. AGAIN, IF YOU USE THIS SOFTWARE YOU DO SO AT YOUR OWN RISK AND ASSUME ALL RESPONSIBILITY FOR THE RESULTS.
***************************************************************************
Download (0.27MB)
Added: 2006-08-23 License: GPL (GNU General Public License) Price:
1160 downloads
Hard Disk Temperature Monitor
Hard Disk Temperature Monitor is a SuperKaramba theme that monitors the hard drive temperature. more>>
Hard Disk Temperature Monitor is my first superkaramba theme, it uses the package hddtemp, please verify if your system has it installed.
I modify this image(http://www.kde-look.org/content/show.php?content=28748)
And made the Icon, from 2 images from the web.
The entire theme is in spanish, but you can translate to any language.
I really apreciate your comments!
Thank you so much, and greetings from Medellin-Colombia!
<<lessI modify this image(http://www.kde-look.org/content/show.php?content=28748)
And made the Icon, from 2 images from the web.
The entire theme is in spanish, but you can translate to any language.
I really apreciate your comments!
Thank you so much, and greetings from Medellin-Colombia!
Download (0.006MB)
Added: 2006-06-23 License: GPL (GNU General Public License) Price:
1243 downloads
Set CD-ROM Speed 1.1.6
Set CD-ROM Speed is written in Kommander as a helpful application to set CD-ROM and DVD-ROM drive speed more>> Set CD-ROM Speed 1.1.6 is written in Kommander as a helpful application to set CD-ROM and DVD-ROM drive speed. Since the issues mentioned here apply to CD-ROM and DVD-ROM drives as well as to recorders for these types of media, in this document the name 'CD-ROM drive' will be used to refer to all of these drive types.
Major Features:
- Fast CD-ROM drives have one big disadvantage over older and slower models. In order to be able to support high data transfer speeds, the CD-ROM disk must spin very quickly in the disk drive, which results in a lot of noise. This loud humming can make listening to MP3 or OGG music from CD-ROMs a very unpleasant experience and is very annoying at best for other tasks which don't require the CD-ROM to work at full speed.
- Using set-cd-rom-speed, you can decrease the drive's speed and thus reduce the annoying noise. The GUI allows choosing three predefined speeds suitable for different tasks and custom speeds provided by the user. The list of available CD-ROM drives is generated based on information from /etc/fstab. This works even if you use supermount-ng or subfs for mounting the CD-ROMs. The program supports multiple languages and several translations are available. It also integrates with KDE by adding an item which allows setting drive speed to the context menu of CD-ROM and DVD-ROM drive icons displayed on the desktop.
- Added Czech translation (thanks to Jozef Riha)
- Fixes in Slovak translation (thanks to Jozef Riha)
- Two variants of Brazilian Portuguese translation merged into one (thanks to Dherik Barison)
<<less
Added: 2006-10-05 License: GPL Price: FREE
1 downloads
NCurses Disk Usage 1.3
NCurses Disk Usage provides a fast and easy interface to your harddrive. more>>
As the name already suggests, ncdu is an NCurses version of the famous old du unix command.
NCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
<<lessNCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
Download (0.089MB)
Added: 2007-08-06 License: MIT/X Consortium License Price:
813 downloads
Disk Karamba
Disk Karamba is a disk monitoring SuperKaramba theme. more>>
Disk Karamba is a disk monitoring SuperKaramba theme.
Disk Karamba is not very special but perhaps will be useful for someone. I used for it one icon from MetalGold icon theme.
<<lessDisk Karamba is not very special but perhaps will be useful for someone. I used for it one icon from MetalGold icon theme.
Download (0.021MB)
Added: 2006-06-21 License: GPL (GNU General Public License) Price:
1222 downloads
Disk Manager 1.0.1
Disk manager is a simple filesystem configurator. more>>
Disk Manager project is a simple filesystem configurator that allow you to:
- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).
<<less- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).
Download (0.055MB)
Added: 2007-07-17 License: GPL (GNU General Public License) Price:
520 downloads
X11 Disk Activity Feedback A.01.11.01
X11 Disk Activity Feedback shows disk activity by animating the X11 cursor. more>>
X11 Disk Activity Feedback shows disk activity by animating the X11 cursor.
It provides a visual feedback of local disk activity by changing the default X11 mouse pointer to an animated wheel.
Installation:
Untar and change into the new directory and:
# xmkmf
# make
# make install
<<lessIt provides a visual feedback of local disk activity by changing the default X11 mouse pointer to an animated wheel.
Installation:
Untar and change into the new directory and:
# xmkmf
# make
# make install
Download (0.012MB)
Added: 2006-09-27 License: GPL (GNU General Public License) Price:
1124 downloads
Original Disk Mount Applet 2.10.0
Original Disk Mount Applet is the original disk mount panel applet. more>>
Original Disk Mount Applet is the original disk mount panel applet.
This is the same as the disk mounter included through GNOME 2.8. For GNOME 2.10 the official applet was rewritten, the new version adds the ability to autodetect mountable devices, but drops a significant (all) configurability.
It no longer allows you to choose which devices are displayed on the panel, their order, or icon representation.
Install this applet if you want to restore the old disk mounter behavior for GNOME 2.10.
<<lessThis is the same as the disk mounter included through GNOME 2.8. For GNOME 2.10 the official applet was rewritten, the new version adds the ability to autodetect mountable devices, but drops a significant (all) configurability.
It no longer allows you to choose which devices are displayed on the panel, their order, or icon representation.
Install this applet if you want to restore the old disk mounter behavior for GNOME 2.10.
Download (0.064MB)
Added: 2005-08-02 License: GPL (GNU General Public License) Price:
1547 downloads
Linux Inventory Aggregator 2.1
Linux Inventory Aggregator is designed to be a simple script for gathering hardware information. more>>
Linux Inventory Aggregator is designed to be a simple, self-contained (as much as possible) script for gathering hardware information.
Sample Output
In the first example, a stock Mandrake system is shown with a single processor, 386MB of memory, an attached SCSI disk array, and several internal IDE drives.
[rtwomey@gamma inventory]$ ./get_inventory.pl
Statistics of machine gamma
* 1 CPU: Pentium III (Coppermine) @ 863.955MHz
* Kernel: 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005
* Memory total: 385668kB
* Hostname: gamma @ 192.168.1.3
* Network Interfaces:
lo: 127.0.0.1
eth0: 192.168.1.3
* Graphics card: nVidia Corporation NV15 [GeForce2 GTS/Pro] (rev a3)
* Network controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
* Network controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
* Sound card: Creative Labs SB Live! EMU10k1 (rev 07)
* SCSI card: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
Attached IDE disks:
* Disk hdg: size: 81964302336 bytes (81GB), model: Maxtor 4R080L0
* Disk hdf: size: 30900215808 bytes (30GB), model: Maxtor 93073U4
* Disk hde: size: 164696555520 bytes (164GB), model: HDS722516VLAT80
* Disk hdc: size: 123522416640 bytes (123GB), model: IC35L120AVV207-0
* Disk hdb: size: 120034123776 bytes (120GB), model: WDC WD1200JB-75CRA0
* Disk hda: size: 45191946240 bytes (45GB), model: IBM-DTLA-307045
Attached SCSI disks:
* Disk sda: SEAGATE ST318452LC (Channel: 00 ID: 08 Lun: 00)
* Disk sdb: SEAGATE ST318453LC (Channel: 00 ID: 09 Lun: 00)
* Disk sdc: SEAGATE ST336607LC (Channel: 01 ID: 08 Lun: 00)
* Disk sdd: SEAGATE ST336607LC (Channel: 01 ID: 09 Lun: 00)
* Disk sde: SEAGATE ST336607LC (Channel: 01 ID: 11 Lun: 00)
* Disk sdf: SEAGATE ST336607LC (Channel: 01 ID: 12 Lun: 00)
* Disk sdg: SEAGATE ST318453LC (Channel: 01 ID: 13 Lun: 00)
* Disk sdh: SEAGATE ST318452LC (Channel: 01 ID: 14 Lun: 00)
The second example illustrates a dual-processor Xeon system (note that HyperThreading causes the 2 processors to appear as 4):
[rtwomey@babbage inventory]# ./get_inventory.pl
Statistics of machine babbage
* 4 CPUs: CPU1 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU2 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU3 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU4 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz
* Kernel: 2.6.9-11.ELsmp #1 SMP Fri May 20 18:26:27 EDT 2005
* Memory total: 514484kB
* Hostname: babbage @ XXX.XXX.XXX.XXX
* Network Interfaces:
lo: 127.0.0.1
eth0: XXX.XXX.XXX.XXX
* Network controller: Intel Corporation 82544GC Gigabit Ethernet Controller (LOM) (rev 02)
* SCSI card: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
* SCSI card: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
* Graphics card: ATI Technologies Inc Rage XL (rev 27)
Attached SCSI disks:
* Disk sda: SEAGATE ST373307LC (Channel: 00 ID: 00 Lun: 00)
* Disk sdb: SEAGATE ST39103LC (Channel: 00 ID: 01 Lun: 00)
* Disk sdc: SEAGATE ST39204LC (Channel: 00 ID: 03 Lun: 00)
* Disk sdd: SEAGATE ST39204LC (Channel: 00 ID: 04 Lun: 00)
The third example illustrates an IDE CD-RW, as well as a SATA disk that is handled via the Linux sg driver:
[rtwomey@younger inventory]# ./get_inventory.pl
Statistics of machine younger
* 2 CPUs: CPU1 = Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2992.825MHz; CPU2 = Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2992.825MHz
* Kernel: 2.6.9-16.ELsmp #1 SMP Mon Aug 15 20:06:02 EDT 2005
* Memory total: 1033192kB
* Hostname: younger @ XXX.XXX.XXX.XXX
* Network Interfaces:
lo: 127.0.0.1
eth0: XXX.XXX.XXX.XXX
* Sound card: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC97 Audio Controller (rev 03)
* Graphics card: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
* Network controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
Attached IDE disks:
* CD-RW drive: HL-DT-ST CD-RW/DVD-ROM GCC-4482B
Attached SCSI disks:
* ATA ST340014AS (Channel: 00 ID: 00 Lun: 00)
<<lessSample Output
In the first example, a stock Mandrake system is shown with a single processor, 386MB of memory, an attached SCSI disk array, and several internal IDE drives.
[rtwomey@gamma inventory]$ ./get_inventory.pl
Statistics of machine gamma
* 1 CPU: Pentium III (Coppermine) @ 863.955MHz
* Kernel: 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005
* Memory total: 385668kB
* Hostname: gamma @ 192.168.1.3
* Network Interfaces:
lo: 127.0.0.1
eth0: 192.168.1.3
* Graphics card: nVidia Corporation NV15 [GeForce2 GTS/Pro] (rev a3)
* Network controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
* Network controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
* Sound card: Creative Labs SB Live! EMU10k1 (rev 07)
* SCSI card: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
Attached IDE disks:
* Disk hdg: size: 81964302336 bytes (81GB), model: Maxtor 4R080L0
* Disk hdf: size: 30900215808 bytes (30GB), model: Maxtor 93073U4
* Disk hde: size: 164696555520 bytes (164GB), model: HDS722516VLAT80
* Disk hdc: size: 123522416640 bytes (123GB), model: IC35L120AVV207-0
* Disk hdb: size: 120034123776 bytes (120GB), model: WDC WD1200JB-75CRA0
* Disk hda: size: 45191946240 bytes (45GB), model: IBM-DTLA-307045
Attached SCSI disks:
* Disk sda: SEAGATE ST318452LC (Channel: 00 ID: 08 Lun: 00)
* Disk sdb: SEAGATE ST318453LC (Channel: 00 ID: 09 Lun: 00)
* Disk sdc: SEAGATE ST336607LC (Channel: 01 ID: 08 Lun: 00)
* Disk sdd: SEAGATE ST336607LC (Channel: 01 ID: 09 Lun: 00)
* Disk sde: SEAGATE ST336607LC (Channel: 01 ID: 11 Lun: 00)
* Disk sdf: SEAGATE ST336607LC (Channel: 01 ID: 12 Lun: 00)
* Disk sdg: SEAGATE ST318453LC (Channel: 01 ID: 13 Lun: 00)
* Disk sdh: SEAGATE ST318452LC (Channel: 01 ID: 14 Lun: 00)
The second example illustrates a dual-processor Xeon system (note that HyperThreading causes the 2 processors to appear as 4):
[rtwomey@babbage inventory]# ./get_inventory.pl
Statistics of machine babbage
* 4 CPUs: CPU1 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU2 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU3 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz; CPU4 = Intel(R) Xeon(TM) CPU 2.80GHz @ 2791.744MHz
* Kernel: 2.6.9-11.ELsmp #1 SMP Fri May 20 18:26:27 EDT 2005
* Memory total: 514484kB
* Hostname: babbage @ XXX.XXX.XXX.XXX
* Network Interfaces:
lo: 127.0.0.1
eth0: XXX.XXX.XXX.XXX
* Network controller: Intel Corporation 82544GC Gigabit Ethernet Controller (LOM) (rev 02)
* SCSI card: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
* SCSI card: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
* Graphics card: ATI Technologies Inc Rage XL (rev 27)
Attached SCSI disks:
* Disk sda: SEAGATE ST373307LC (Channel: 00 ID: 00 Lun: 00)
* Disk sdb: SEAGATE ST39103LC (Channel: 00 ID: 01 Lun: 00)
* Disk sdc: SEAGATE ST39204LC (Channel: 00 ID: 03 Lun: 00)
* Disk sdd: SEAGATE ST39204LC (Channel: 00 ID: 04 Lun: 00)
The third example illustrates an IDE CD-RW, as well as a SATA disk that is handled via the Linux sg driver:
[rtwomey@younger inventory]# ./get_inventory.pl
Statistics of machine younger
* 2 CPUs: CPU1 = Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2992.825MHz; CPU2 = Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2992.825MHz
* Kernel: 2.6.9-16.ELsmp #1 SMP Mon Aug 15 20:06:02 EDT 2005
* Memory total: 1033192kB
* Hostname: younger @ XXX.XXX.XXX.XXX
* Network Interfaces:
lo: 127.0.0.1
eth0: XXX.XXX.XXX.XXX
* Sound card: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC97 Audio Controller (rev 03)
* Graphics card: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
* Network controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
Attached IDE disks:
* CD-RW drive: HL-DT-ST CD-RW/DVD-ROM GCC-4482B
Attached SCSI disks:
* ATA ST340014AS (Channel: 00 ID: 00 Lun: 00)
Download (0.020MB)
Added: 2006-12-15 License: The Apache License 2.0 Price:
1055 downloads
2-Disk X window embedded Linux 2.0.0
2-Disk X window embedded Linux is a very efficient Linux/xwindows distribution. more>>
2-Disk X window embedded Linux is a very efficient Linux/xwindows distribution, implementing a net centric operating environment and user friendly GUI
The distribution is intended to be a demonstration of Mungkie assiciates embedded appliance development environment, showing the sort of environment that can be created for small appliance GUI systems using less than 4Mb flash and 4Mb RAM.
The embedded development environment is based around a standard source tree containing all the required utilities for a standard POSIX unix implementation with a number of XML based GUI configuration and compilation tools. Simple GUI utilities are used to configure required components and set compilation options.
The distribution is targeted as a base for:
corporate users to reduce IT costs by deploying X terminals on old or low cost hardware
Or:
embedded OS for handhelds, settop boxes, or communications devices, with full support for bluetooth, wifi, internet, and MMS protocols
Or:
Hobbyist or small companies to develop specialist applications for cheap commodity hardware
Main features:
- kernel 2.0.x/2.2.x/2.4.x
- libc-2.1/libc5/uclibc,
- tcp/ip network support. full protocol stack for wifi, mms
- busybox 0.62,
- tinylogin 1.0,
- ppp, chat, some daemons, inetd, crond. dhcp client and server. iptables
- e3 editor,
- X window system 4.1 vesa
- VNC client
- merlin character recognition
- rdesktop remote windows client
- ssh
- Mungwm : a window manager
- Mungbrowse : a web browser
- Mungterm : a terminal program
- Mungames : a collection of 12 games
- Mungedit : a text editor
- Mungfile : embedded file manager
- NEW Evil bastard operator tools
- NEW Cheese dynamics context apropriation modeling
- NEW Mini Mung beans (beans of mung for all your network environment)
Enhancements:
- Script cleanups were done to the build system.
- Bugs were fixed concerning HTTPS access with the Mweb browser.
<<lessThe distribution is intended to be a demonstration of Mungkie assiciates embedded appliance development environment, showing the sort of environment that can be created for small appliance GUI systems using less than 4Mb flash and 4Mb RAM.
The embedded development environment is based around a standard source tree containing all the required utilities for a standard POSIX unix implementation with a number of XML based GUI configuration and compilation tools. Simple GUI utilities are used to configure required components and set compilation options.
The distribution is targeted as a base for:
corporate users to reduce IT costs by deploying X terminals on old or low cost hardware
Or:
embedded OS for handhelds, settop boxes, or communications devices, with full support for bluetooth, wifi, internet, and MMS protocols
Or:
Hobbyist or small companies to develop specialist applications for cheap commodity hardware
Main features:
- kernel 2.0.x/2.2.x/2.4.x
- libc-2.1/libc5/uclibc,
- tcp/ip network support. full protocol stack for wifi, mms
- busybox 0.62,
- tinylogin 1.0,
- ppp, chat, some daemons, inetd, crond. dhcp client and server. iptables
- e3 editor,
- X window system 4.1 vesa
- VNC client
- merlin character recognition
- rdesktop remote windows client
- ssh
- Mungwm : a window manager
- Mungbrowse : a web browser
- Mungterm : a terminal program
- Mungames : a collection of 12 games
- Mungedit : a text editor
- Mungfile : embedded file manager
- NEW Evil bastard operator tools
- NEW Cheese dynamics context apropriation modeling
- NEW Mini Mung beans (beans of mung for all your network environment)
Enhancements:
- Script cleanups were done to the build system.
- Bugs were fixed concerning HTTPS access with the Mweb browser.
Download (7.2MB)
Added: 2006-05-06 License: Free To Use But Restricted Price:
1266 downloads
Video Disk Recorder 1.4.4
Video Disk Recorder is a digital satellite receiver program using Linux and DVB technologies. more>>
Video Disk Recorder (VDR) is a digital satellite receiver program using Linux and DVB technologies. Video Disk Recorder can record MPEG2 streams, as well as output the stream to TV. It also supports plugins for DVD, DivX, or MP3 playback and more.
Main features:
- Operation entirely via DVB cards On Screen Display and infrared control (LIRC/RCU) or keyboard
- Support for multiple DVB cards (up to four, at least one full featured card with video out required) and "conditional access" (CICAM)
- Channel groups
- EPG display by channel or by time ("Whats on now/next")
- Timers: Programming via EPG or manually, priority/lifetime model, single-shot or repeating timers which use EPG subtitle info as recordings title additionally
- Recording storage on disk: Automatically splitting of recording into files (<<less
Main features:
- Operation entirely via DVB cards On Screen Display and infrared control (LIRC/RCU) or keyboard
- Support for multiple DVB cards (up to four, at least one full featured card with video out required) and "conditional access" (CICAM)
- Channel groups
- EPG display by channel or by time ("Whats on now/next")
- Timers: Programming via EPG or manually, priority/lifetime model, single-shot or repeating timers which use EPG subtitle info as recordings title additionally
- Recording storage on disk: Automatically splitting of recording into files (<<less
Download (0.47MB)
Added: 2006-11-12 License: GPL (GNU General Public License) Price:
1093 downloads
Apple Disk Transfer ProDOS 1.0.2
Apple Disk Transfer ProDOS transfers diskettes and logical disk images between Apple ][-era computers and the modern world. more>>
Apple Disk Transfer ProDOS (or ADTPro for short) transfers diskettes and logical disk images between Apple ][-era computers and the modern world. If youre familiar with the original ADT, ADTPro extends ADTs reach by working with more logical disk formats, drive types, communications devices, and host operating systems.
Main features:
- Compatibility with any device ProDOS can read
- Compatibility with any Apple ][ (or clone) computer with 64k memory
- Compatibility with many logical disk image formats: .DSK, .PO, .NIB, 2IMG
- Server compatibility with original ADT client program
- Server compatibility with Windows, Mac OSX, Linux, and probably Solaris
- Ability to bootstrap an Apple ][ from bare metal over serial or cassette ports
- Ability to send floppies in "batch" mode without having to name each one
Server
The server program runs on a computer capable of running Java. Depending on how you want to connect to your Apple, you might also need a serial port and cables, an Uthernet card for your apple, or a couple of audio patch cables. The server offers a compact user interface that shows what communications are taking place between the host and the Apple ][.
The servers primary role is to send and receive disk images as requested from the client. But if you have recently acquired an Apple and a disk drive, and you have no software for it - youre in a bit of a tricky situation if you want to move software from the Internet all the way to your shiny new Apple. ADTPros server can help get you get bootstrapped.
Client
The client side runs on the Apple ][. It handles most of the user interaction. When choosing disks/volumes to transfer, anything that ProDOS can see is fair game. Transferring data occurs with a 20k buffer on the Apple, so all transfers are broken up into 20k chunks. A progress indicator shows how far it is into the current chunk, as well as a running count of the total progress.
Enhancements:
- This release has been enhanced with Jean-Marc Boutillon (Deckard)s FASTDSK fast Disk II reading routines.
- This results in a speed boost of 25%-33% for Disk II to host transfers.
- Bootstrapping operations have been reduced, as there is no longer a dependency on ProDOS BASIC.
<<lessMain features:
- Compatibility with any device ProDOS can read
- Compatibility with any Apple ][ (or clone) computer with 64k memory
- Compatibility with many logical disk image formats: .DSK, .PO, .NIB, 2IMG
- Server compatibility with original ADT client program
- Server compatibility with Windows, Mac OSX, Linux, and probably Solaris
- Ability to bootstrap an Apple ][ from bare metal over serial or cassette ports
- Ability to send floppies in "batch" mode without having to name each one
Server
The server program runs on a computer capable of running Java. Depending on how you want to connect to your Apple, you might also need a serial port and cables, an Uthernet card for your apple, or a couple of audio patch cables. The server offers a compact user interface that shows what communications are taking place between the host and the Apple ][.
The servers primary role is to send and receive disk images as requested from the client. But if you have recently acquired an Apple and a disk drive, and you have no software for it - youre in a bit of a tricky situation if you want to move software from the Internet all the way to your shiny new Apple. ADTPros server can help get you get bootstrapped.
Client
The client side runs on the Apple ][. It handles most of the user interaction. When choosing disks/volumes to transfer, anything that ProDOS can see is fair game. Transferring data occurs with a 20k buffer on the Apple, so all transfers are broken up into 20k chunks. A progress indicator shows how far it is into the current chunk, as well as a running count of the total progress.
Enhancements:
- This release has been enhanced with Jean-Marc Boutillon (Deckard)s FASTDSK fast Disk II reading routines.
- This results in a speed boost of 25%-33% for Disk II to host transfers.
- Bootstrapping operations have been reduced, as there is no longer a dependency on ProDOS BASIC.
Download (MB)
Added: 2007-08-13 License: GPL (GNU General Public License) Price:
816 downloads
CDriveBack 1.01
CDriveBack project is a backup system. more>>
CDriveBack project is a backup system.
CDriveBacks design goal is to make a backup system so easy to use that the end users with no backup, eighty percent of XP Home users and thirty percent of home XP Professional users, take backups and can easily restore their system.
For example, backing up the C: drive to an area on the C: drive takes two steps:
- Boot the CDriveBack CD, when the first screen shows,
- Hit enter to backup the C: drive.
CDriveBack is:
- A Live CD, one that you can boot, requiring no installs, using,
- Linux 2.6.x, a recent version of the Linux operationg system, to run
- Dialog screens that manage backup files on your drives and
- Use DAR to backup the partition or drive to files, in turn using, when needed,
- Backing up older Windows drives as well as Linux formatted drives is built-in
- NTFS-3G, the NTFS Drive handling package. is used for NTFS drives.
Enhancements:
Bug fixes, all repaired:
- A full restore from a backup area with no differential backup files still asked for diff files with an akward message.
- Documentation dates and releases out of date.
- Startup session screen still referred to the release candidate.
Added:
- An optional "Force" setting for mounting NTFS disks from a Windows that is using chkdsk to always call the partition "dirty"
<<lessCDriveBacks design goal is to make a backup system so easy to use that the end users with no backup, eighty percent of XP Home users and thirty percent of home XP Professional users, take backups and can easily restore their system.
For example, backing up the C: drive to an area on the C: drive takes two steps:
- Boot the CDriveBack CD, when the first screen shows,
- Hit enter to backup the C: drive.
CDriveBack is:
- A Live CD, one that you can boot, requiring no installs, using,
- Linux 2.6.x, a recent version of the Linux operationg system, to run
- Dialog screens that manage backup files on your drives and
- Use DAR to backup the partition or drive to files, in turn using, when needed,
- Backing up older Windows drives as well as Linux formatted drives is built-in
- NTFS-3G, the NTFS Drive handling package. is used for NTFS drives.
Enhancements:
Bug fixes, all repaired:
- A full restore from a backup area with no differential backup files still asked for diff files with an akward message.
- Documentation dates and releases out of date.
- Startup session screen still referred to the release candidate.
Added:
- An optional "Force" setting for mounting NTFS disks from a Windows that is using chkdsk to always call the partition "dirty"
Download (100MB)
Added: 2007-02-12 License: GPL (GNU General Public License) Price:
984 downloads
mod_dirsize 0.1
mod_dirsize is an Apache module to calculate the disk space used for any virtual host on a server. more>>
mod_dirsize is an Apache module to calculate the disk space used for any virtual host on a server.
The results are displayed in KB using XML.
<<lessThe results are displayed in KB using XML.
Download (0.012MB)
Added: 2005-08-23 License: GPL (GNU General Public License) Price:
1523 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above disk drives disappeared search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
