Free disable icmp echo software for linux

Shell over ICMP consists of two free and open source applications: one server and one client. Shell over ICMP project allows a user to connect to a remote shell daemon, by using ICMP protocol instead of classical TCP.
Entirely written in Python, soicmp is a working proof-of-concept to demonstrate that data can be transmitted across a network by hiding it in traffic that normally does not contain payloads.
How does it work?
The soicmp server is a daemon that must be started on the remote server. When the server receives a request from the client it looks into the packets payload. The payload must respect certain protocol rules. In detail the client must specify:
command
communication mode (echo|echo/reply)
authentication (y|n)
This is an example of a correct payload string sent by client to server:
$CMD ls -a $MODE echo/reply $PWD root2005 $END
If the payload matches with the server protocol specification then it will pipe the command to "/bin/sh" or "cmd.exe" and execute it. The server then reads the result from the pipe and sends it back to the client that will print it to stdout.
Moreover every client will send ICMP packets having id equal to the clients current process ID and will accept only ICMP replies having the same id value. This prevents output to be printed by other client instances running on the same workstation (this argument is also treated in the FAQs section).
Main features:
- Platform independent.
- Possibility to run soicmp daemon on multiple ethernet interfaces simultaneously handling multiple client connections.
- Possibility to specify the buffer size of outgoing packets.
- Client side source IP address spoofing.
- Remote client case-sensitive (plain texted) authentication.
- Possibility to select two communication types:
- One based on encapsulating command output in unique "one way" ICMP_ECHOREPLY (type 0) packets sent by server to client (see fig. 1).
- Another one that guarantees the correct packets delivering by using the request/response nature of ECHO and ECHOREPLY ICMP packet types (see fig.2)
- No listening sockets are listed by netstat or similar programs.

NAT iptables firewall script is an iptables firewall script.

This script is meant to be run once per boot the rules will be double added if you try to run it twice if you need to add another rule during runtime, change the -A to a -I to add it to the top of the list of rules if you use -A it will go at the end after the reject rule.

Sample:

# interface definitions
BAD_IFACE=eth0

DMZ_IFACE=eth1
DMZ_ADDR=x.x.x.96/28

GOOD_IFACE=eth2
GOOD_ADDR=192.168.1.0/24

MASQ_SERVER=x.x.x.98
FTP_SERVER=x.x.x.100
MAIL_SERVER=x.x.x.99
MAIL_SERVER_INTERNAL=192.168.1.3

# testing
#set -x

ip route del x.x.x.96/28 dev $BAD_IFACE
ip route del x.x.x.96/28 dev $DMZ_IFACE
ip route add x.x.x.97 dev $BAD_IFACE
ip route add x.x.x.96/28 dev $DMZ_IFACE

# we need proxy arp for the dmz network
echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/eth1/proxy_arp

# turn on ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# turn on antispoofing protection
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 1 > $f; done

# flush all rules in the filter table
#iptables -F

# flush built in rules
iptables -F INPUT
iptables -F OUTPUT
iptables -F FORWARD

# deny everything for now
iptables -A INPUT -j DROP
iptables -A FORWARD -j DROP
iptables -A OUTPUT -j DROP

# make the chains to define packet directions
# bad is the internet, dmz is our dmz, good is our masqed network
iptables -N good-dmz
iptables -N bad-dmz
iptables -N good-bad
iptables -N dmz-good
iptables -N dmz-bad
iptables -N bad-good

iptables -N icmp-acc

# accept related packets
iptables -A FORWARD -m state --state INVALID -j DROP
iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT

# internal client masqing
iptables -t nat -A POSTROUTING -s $GOOD_ADDR -o $BAD_IFACE -j SNAT --to $MASQ_SERVER
# mail server masqing
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport smtp -j DNAT --to $MAIL_SERVER_INTERNAL:25
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport http -j DNAT --to $MAIL_SERVER_INTERNAL:80
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport https -j DNAT --to $MAIL_SERVER_INTERNAL:443
# to allow the above to work you need something like
# iptables -A bad-good -p tcp --dport smtp -d $MAIL_SERVER_INTERNAL -j ACCEPT

# set which addresses jump to which chains
iptables -A FORWARD -s $GOOD_ADDR -o $DMZ_IFACE -j good-dmz
iptables -A FORWARD -s $GOOD_ADDR -o $BAD_IFACE -j good-bad

iptables -A FORWARD -s $DMZ_ADDR -i $DMZ_IFACE -o $BAD_IFACE -j dmz-bad
iptables -A FORWARD -s $DMZ_ADDR -i $DMZ_IFACE -o $GOOD_IFACE -j dmz-good

iptables -A FORWARD -o $DMZ_IFACE -j bad-dmz
iptables -A FORWARD -o $GOOD_IFACE -j bad-good

# drop anything that doesnt fit these
iptables -A FORWARD -j LOG --log-prefix "chain-jump "
iptables -A FORWARD -j DROP

# icmp acceptance
iptables -A icmp-acc -p icmp --icmp-type destination-unreachable -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type source-quench -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type time-exceeded -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type echo-request -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type echo-reply -j ACCEPT
# iptables -A icmp-acc -j LOG --log-prefix "icmp-acc "
iptables -A icmp-acc -j DROP

# from internal to dmz
iptables -A good-dmz -p tcp --dport smtp -j ACCEPT
iptables -A good-dmz -p tcp --dport pop3 -j ACCEPT
iptables -A good-dmz -p udp --dport domain -j ACCEPT
iptables -A good-dmz -p tcp --dport domain -j ACCEPT
iptables -A good-dmz -p tcp --dport www -j ACCEPT
iptables -A good-dmz -p tcp --dport https -j ACCEPT
iptables -A good-dmz -p tcp --dport ssh -j ACCEPT
iptables -A good-dmz -p tcp --dport telnet -j ACCEPT
iptables -A good-dmz -p tcp --dport auth -j ACCEPT
iptables -A good-dmz -p tcp --dport ftp -j ACCEPT
iptables -A good-dmz -p tcp --dport 1521 -j ACCEPT
iptables -A good-dmz -p icmp -j icmp-acc
iptables -A good-dmz -j LOG --log-prefix "good-dmz "
iptables -A good-dmz -j DROP

# from external to dmz
iptables -A bad-dmz -p tcp --dport smtp -j ACCEPT
iptables -A bad-dmz -p udp --dport domain -j ACCEPT
iptables -A bad-dmz -p tcp --dport domain -j ACCEPT
iptables -A bad-dmz -p tcp --dport www -j ACCEPT
iptables -A bad-dmz -p tcp --dport https -j ACCEPT
iptables -A bad-dmz -p tcp --dport ssh -j ACCEPT
iptables -A bad-dmz -p tcp -d $FTP_SERVER --dport ftp -j ACCEPT
iptables -A bad-dmz -p icmp -j icmp-acc
iptables -A bad-dmz -j LOG --log-prefix "bad-dmz "
iptables -A bad-dmz -j DROP

# from internal to external
iptables -A good-bad -j ACCEPT
# iptables -t nat -A POSTROUTING -o $BAD_IFACE -j SNAT --to $MASQ_SERVER
#iptables -A good-bad -p tcp -j MASQ
#iptables -A good-bad -p udp -j MASQ
#iptables -A good-bad -p icmp -j MASQ
#ipchains -A good-bad -p tcp --dport www -j MASQ
#ipchains -A good-bad -p tcp --dport ssh -j MASQ
#ipchains -A good-bad -p udp --dport 33434:33500 -j MASQ
#ipchains -A good-bad -p tcp --dport ftp -j MASQ
#ipchains -A good-bad -p icmp --icmp-type ping -j MASQ
#ipchains -A good-bad -j REJECT -l

# from dmz to internal
# iptables -A dmz-good -p tcp ! --syn --sport smtp -j ACCEPT
iptables -A dmz-good -p tcp --dport smtp -j ACCEPT
iptables -A dmz-good -p tcp --sport smtp -j ACCEPT
iptables -A dmz-good -p udp --sport domain -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport domain -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport www -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport ssh -j ACCEPT
iptables -A dmz-good -p tcp -d 192.168.1.34 --dport smtp -j ACCEPT
iptables -A dmz-good -p icmp -j icmp-acc
iptables -A dmz-good -j LOG --log-prefix "dmz-good "
iptables -A dmz-good -j DROP

# from dmz to external
iptables -A dmz-bad -p tcp --dport smtp -j ACCEPT
iptables -A dmz-bad -p tcp --sport smtp -j ACCEPT
iptables -A dmz-bad -p udp --dport domain -j ACCEPT
iptables -A dmz-bad -p tcp --dport domain -j ACCEPT
iptables -A dmz-bad -p tcp --dport www -j ACCEPT
iptables -A dmz-bad -p tcp --dport https -j ACCEPT
iptables -A dmz-bad -p tcp --dport ssh -j ACCEPT
iptables -A dmz-bad -p tcp --dport ftp -j ACCEPT
iptables -A dmz-bad -p tcp --dport whois -j ACCEPT
iptables -A dmz-bad -p tcp --dport telnet -j ACCEPT
iptables -A dmz-bad -p udp --dport ntp -j ACCEPT
# ipchains -A good-bad -p udp --dport 33434:33500 -j MASQ
iptables -A dmz-bad -p icmp -j icmp-acc
iptables -A dmz-bad -j LOG --log-prefix "dmz-bad "
iptables -A dmz-bad -j DROP

# from external to internal
iptables -A bad-good -p tcp --dport smtp -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -p tcp --dport http -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -p tcp --dport https -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -j LOG --log-prefix "bad-good "
iptables -A bad-good -j REJECT

# rules for this machine itself
iptables -N bad-if
iptables -N dmz-if
iptables -N good-if

# set up the jumps to each chain
iptables -A INPUT -i $BAD_IFACE -j bad-if
iptables -A INPUT -i $DMZ_IFACE -j dmz-if
iptables -A INPUT -i $GOOD_IFACE -j good-if

# external iface
iptables -A bad-if -p icmp -j icmp-acc
iptables -A bad-if -j ACCEPT
#ipchains -A bad-if -i ! ppp0 -j DENY -l
#ipchains -A bad-if -p TCP --dport 61000:65095 -j ACCEPT
#ipchains -A bad-if -p UDP --dport 61000:65095 -j ACCEPT
#ipchains -A bad-if -p ICMP --icmp-type pong -j ACCEPT
#ipchains -A bad-if -j icmp-acc
#ipchains -A bad-if -j DENY

# dmz iface
iptables -A bad-if -p icmp -j icmp-acc
iptables -A dmz-if -j ACCEPT

# internal iface
iptables -A good-if -p tcp --dport ssh -j ACCEPT
iptables -A good-if -p ICMP --icmp-type ping -j ACCEPT
iptables -A good-if -p ICMP --icmp-type pong -j ACCEPT
iptables -A good-if -j icmp-acc
iptables -A good-if -j DROP


# remove the complete blocks
iptables -D INPUT 1
iptables -D FORWARD 1
iptables -D OUTPUT 1

PFG for IPTables is a PHP Firewall Generator.
Main features:
Main Configuration
- Server IP adress
- External Network Interface
- Internal Network Interface
- Enable Forwarding and MasqON
Deny followning ICMP types
- Echo RequestsON
- Destination UnreachableON
- Timestamp ReplyON
- Adress Mask ReplyON
- Adress Mask RequestON
- Host UnreachableON
- Host RedirectON
- Timestamp requestON
- Source QuenchON
Accept services
- FTPON
- SSHON
- SMTPON
- IMAPON
- POPON
- HTTPON
- HTTPSON
- MYSQLON
- DNSON
P2P
- Direct ConnectON
- BeershareON
- NapsterON
- WinMXON
UDP Protocol
- Open UDP for all portsON
- Only open upp for these ports
Allow other TCP ports
PortForwarding
Blocking IPs and URLs
- Blocking connections from internal ips (seperate each ip adress with blankspace)
- Blocking access to sites on the internet
Add IPs you want to allow anything from

Host enumeration is the act of determining the IP address of potential targets on a network. This can be done in both layer 2 and layer 3. Icmpenum project can send ICMP traffic for such enumeration.

The ICMP packets supported are: Echo, Timestamp, Information and Netmask. Furthermore, it supports spoofing and promiscuous listening for reply packets. Icmpenum is great for enumerating networks which allow ICMP traffic.

Icmpenum sends ICMP traffic to potential targets on a network.
Introduction:
Host enumeration is the act of determining the IP address of potential targets on a network. This can be done in both layer 2 and layer 3. Icmpenum sends ICMP traffic for such enumeration. The ICMP packets supported are: Echo, Timestamp, Information and Netmask. Furthermore, it supports spoofing and promiscuous listening for reply packets. Icmpenum is great for enumerating networks which allow ICMP traffic.
Installation:
1. Install the latest libpcap (libpcap 0.4, ftp://ftp.ee.lbl.gov/libpcap.tar.Z).
2. Install the latest Libnet (http://www.packetfactory.net/libnet/).
3. Compile icmpenum as follows:
gcc `libnet-config --defines` -o icmpenum icmpenum.c -lnet -lpcap
4. Copy icmpenum to your fave directory and (as root) start enumerating.
Usage:
Running icmpenum -h gives you the following screen:
# ./icmpenum -h
USAGE: ./icmpenum [opts] [-c class C] [-d dev] [-i 1-3] [-s src] [-t sec] hosts
opts are h n p r v
-h this help screen
-n no sending of packets
-p promiscuous receive mode
-r receiving packets only (no
-v verbose
-c class C in x.x.x.0 form
-i icmp type to send/receive, types include the following:
1 echo/echo reply (default)
2 timestamp request/reply
3 info request/reply
-d device to grab local IP or sniff from, default is eth0
-s spoofed source address
-t time in seconds to wait for all replies (default 5)
host(s) are target hosts (ignored if using -c)
Examples:
Here are some example uses of icmpenum to enumerate hosts.
Example 1:
[Host1]# icmpenum 192.168.1.1 192.168.1.2
This will use the default of Echo packets to try and determine if
192.168.1.1 and 192.168.1.2 are up and running.
Example 2:
[Host1]# icmpenum -i 2 -v 192.168.100.100 192.168.100.200
This will enumerate the two hosts using Timestamp packets in
verbose mode.
Example 3:
[Host1]# icmpenum -i 3 -s 10.10.10.10 -p -v 192.168.1.1 192.168.1.2
This will enumerate hosts 192.168.1.1 and 192.168.1.2 using
Information packets with a spoofed address of 10.10.10.10, since our real address is 10.10.10.11 we use the -p option to listen for the replies.
Here are some more advanced uses of icmpenum.
Example 4:
Assuming Host1 is 6.6.6.6 and Host2 is 7.7.7.7, and that the network 1.1.1.0 has potential hosts to enumerate, we use the following two entries to enumerate with Information packets:
[Host2]# icmpenum -r -t 30 -i 3 -c 1.1.1.0
[Host1]# icmpenum -s 7.7.7.7 -i 3 -c 1.1.1.0
Host2 starts first in receive mode with a timeout of 30 seconds and starts listening for Information packets from the 1.1.1.0 network. Then Host1 starts sending spoofed packets with Host2 as the source address, sending exactly what Host2 is listening for. It should be noted that this is hardly stealthy, as logs at 1.1.1s site could have 7.7.7.7s address all over them, but the -r function is good for testing.
Example 5:
Assuming Host1 is 6.6.6.6 and Host2 is 7.7.7.7, and that Host2 can sniff traffic between 1.1.1.0 and 2.2.2.0, we use the following entries to enumerate the 1.1.1.0 network:
[Host2]# icmpenum -t 20 -n -p -i 2 -c 1.1.1.0
[Host1]# icmpenum -s 2.2.2.2 -i 2 -c 1.1.1.0
Host2 starts first with a timeout of 20 seconds, makes sure not to send the packets with the -n option, listens promiscuously for Timestamp packets from the 1.1.1.0 network. Host1 sends the exact packets Host2 is listening for with a 2.2.2.2 spoofed source address. Yes, one could simply replace the -n option in Host2s command line with -s 2.2.2.2 and do the same thing from one workstation, but were demonstrating a distributed concept.
Enhancements:
- I have added ICMP MASK (type 17 and 18) requests and replys. Simply use the -i 4 option on the command line, such as; icmpenum -i 4 -c 1.2.3.1 (sends ICMP MASK requests to the Class C range 1.2.3.1/24 and reports any system as.
- Due to the use of some older versions of Libnet and Libpcap. I can see problems for some people compiling this and hence have placed two statically linked versions within the tarball

Disk Manager project is a simple filesystem configurator that allow you to:
- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).

NetPacket::ICMP is a Perl module to assemble and disassemble ICMP (Internet Control Message Protocol) packets.

SYNOPSIS

use NetPacket::ICMP;

$icmp_obj = NetPacket::ICMP->decode($raw_pkt);
$icmp_pkt = NetPacket::ICMP->encode();
$icmp_data = NetPacket::ICMP::strip($raw_pkt);

NetPacket::ICMP provides a set of routines for assembling and disassembling packets using ICMP (Internet Control Message Protocol).

Methods

NetPacket::ICMP->decode([RAW PACKET])
Decode the raw packet data given and return an object containing instance data. This method will quite happily decode garbage input. It is the responsibility of the programmer to ensure valid packet data is passed to this method.

NetPacket::ICMP->encode()
Return an ICMP packet encoded with the instance data specified.