Free digital transcription services software for linux

Configuration with no services supported script is for a single host firewall configuration with no services supported by the firewall machine itself.

Sample:

# USER CONFIGURABLE SECTION

# The name and location of the ipchains utility.
IPTABLES=iptables

# The path to the ipchains executable.
PATH="/usr/local/sbin"

# Our internal network address space and its supporting network device.
OURNET="10.5.0.0/24"
OURBCAST="10.5.0.255"
OURDEV="eth0"

# The outside address and the network device that supports it.
ANYADDR="0/0"
ANYDEV="ppp0"

# The TCP services we wish to allow to pass - "" empty means all ports
# note: comma separated
TCPIN="ssh,ftp,ftp-data"
TCPOUT="smtp,www,ssh,telnet,ftp,ftp-data,irc,http"

# The UDP services we wish to allow to pass - "" empty means all ports
# note: comma separated
UDPIN="domain"
UDPOUT="domain"

# The ICMP services we wish to allow to pass - "" empty means all types
# ref: /usr/include/netinet/ip_icmp.h for type numbers
# note: comma separated
ICMPIN="0,3,11"
ICMPOUT="8,3,11"

# Logging; uncomment the following line to enable logging of datagrams
# that are blocked by the firewall.
# LOGGING=1

# END USER CONFIGURABLE SECTION
####################################
# Flush the Input table rules
echo -n Flushing forward... && {
$IPTABLES -F FORWARD
} && echo done

# We want to deny incoming access by default.
# echo -n Denying incoming access... && {
# $IPTABLES -P FORWARD drop
# } && echo done

# Drop all datagrams destined for this host received from outside.
echo -n Dropping incoming datagrams... && {
$IPTABLES -A INPUT -i $ANYDEV -j DROP
} && echo done

# SPOOFING
# We should not accept any datagrams with a source address matching ours
# from the outside, so we deny them.
echo -n Preventing spoofing... && {
$IPTABLES -A FORWARD -s $OURNET -i $ANYDEV -j DROP
} && echo done

# SMURF
# Disallow ICMP to our broadcast address to prevent "Smurf" style attack.
echo -n Preventing SMURFs... && {
$IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET -j DROP
} && echo done

# We should accept fragments, in iptables we must do this explicitly.
echo -n Accepting fragments... && {
$IPTABLES -A FORWARD -f -j ACCEPT
} && echo done

# TCP
# We will accept all TCP datagrams belonging to an existing connection
# (i.e. having the ACK bit set) for the TCP ports were allowing through.
# This should catch more than 95 % of all valid TCP packets.
echo -n Accepting valid incoming tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -d $OURNET --dports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done
echo -n Accepting valid outgoing tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -s $OURNET --sports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done

# TCP - INCOMING CONNECTIONS
# We will accept connection requests from the outside only on the
# allowed TCP ports.
echo -n Accepting incoming tcp connections on allowed ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $ANYDEV -d $OURNET --dports $TCPIN --syn -j ACCEPT
} && echo done

# TCP - OUTGOING CONNECTIONS
# We will accept all outgoing tcp connection requests on the allowed TCP ports.
echo -n Accepting outgoing traffic on allowed tcp ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $OURDEV -d $ANYADDR --dports $TCPOUT --syn -j ACCEPT
} && echo done

# UDP - INCOMING
# allow UDP datagrams in on the allowed ports and back.
echo -n Allowing UDP datagrams in on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -d $OURNET --dports $UDPIN -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -s $OURNET --sports $UDPIN -j ACCEPT
} && echo done

# UDP - OUTGOING
# We will allow UDP datagrams out to the allowed ports and back.
echo -n Allowing UDP datagrams out on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -d $ANYADDR --dports $UDPOUT -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -s $ANYADDR --sports $UDPOUT -j ACCEPT
} && echo done

# ICMP - INCOMING
# We will allow ICMP datagrams in of the allowed types.
# echo -n Allowing ICMP datagrams in of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET --icmp-type $ICMPIN -j ACCEPT
# } && echo done

# ICMP - OUTGOING
# We will allow ICMP datagrams out of the allowed types.
# echo -n Allowing ICMP datagrams out of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $OURDEV -d $ANYADDR --icmp-type $ICMPOUT -j ACCEPT
# } && echo done

# DEFAULT and LOGGING
# All remaining datagrams fall through to the default
# rule and are dropped. They will be logged if youve
# configured the LOGGING variable above.
#

# DoS
# enabling Syn-flood protection
echo -n Enabling Syn-flood protection... && {
iptables -A FORWARD -p tcp --syn -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling Furtive port scanner protection
echo -n Enabling Furtive port scanner protection... && {
iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling ping of death protection
echo -n Enabling ping of death protection... && {
iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
} && echo done


if [ "$LOGGING" ]
then
# Log barred TCP
$IPTABLES -A FORWARD -m tcp -p tcp -j LOG
# Log barred UDP
$IPTABLES -A FORWARD -m udp -p udp -j LOG
# Log barred ICMP
$IPTABLES -A FORWARD -m udp -p icmp -j LOG
fi
#
# end.

The QDS library allows Qt applications to access features provided in common desktop APIs in a portable way, without requiring dependencies on any desktop platform library.
This is especially useful for applications targeting the Unix desktops, because Qt/X11 is very generic and only provides features it can implement on all sub platforms. All library code is licenced under 2-clause BSD licence.
Service implementations are loaded from plugins which link to the respective desktop libraries. The plugin to use can be specified on the applications commandline, in the QDS configuration file or QDS can try to autodetect the currently running platform.
Enhancements:
- Autodetection to use GNOME plugin in case GNOME_DESKTOP_SESSION_ID is set
- Replaced the primitive example application with a simple but network aware text editor application
- Support for wildcards in mailcap entries

LaTeX Service project is a small service which converts LaTeX into an image.
It returns a LaTeX rendering of selected text as a TIFF image.
Enhancements:
- Many things could be improved, its just a 0.1 release... but it works

Logging Services project is intended to provide cross-language logging services for purposes of application debugging and auditing.
We should also mention that thanks to the relentless efforts of many developers, we have a basic level of interoperability between the following projects:
- Log4Cxx (c++)
- Log4j
- Log4Net
- Log4Perl
- Log4PHP
- Log4PLSQL
- JDK1.4s util.logging framework
There is still much work ahead bringing in the various projects to work together within the Logging Services Project. The process is likely to take a little while. In the mean time, we will continue to do what we like best, that is developing open source software.
This is a project of the Apache Software Foundation (ASF). Like all Apache projects, we encourage a collaborative, consensus-based development process. We offer an open and pragmatic software license, and we strive to create software of the highest quality. The ASF is organized into several projects, which like Logging Services project may contain multiple sub-projects.