Free diet router 0.3 software for linux

Diet Tracker is a set of Perl codes to help you keep track of your diet progress. Diet Tracker uses a MySQl database to store and display your weight variations and calorie intake as you progress in your diet.
This software was inspired by Jeremy Zawodnys Excel spreadsheet that does almost the same thing. I wanted a web version that was simple and meant for single user and not finding any, wrote one.
Main features:
- Web based
- Track calorie intake per day
- Graphs to track weight and intake history
- Moving average calculation to even out jitters
- Automatic BMI calculation
- Clean interface

SIP Express Router (ser) is a high-performance, configurable, free SIP ( RFC3261 ) server .
SER features an application-server interface, presence support, SMS gateway, SIMPLE2Jabber gateway, RADIUS/syslog accounting and authorization, server status monitoring, FCP security, etc. Web-based user provisioning, serweb, available.
Its performance allows it to deal with operational burdens, such as broken network components, attacks, power-up reboots and rapidly growing user population.
SERs configuration ability meets needs of a whole range of scenarios including small-office use, enterprise PBX replacements and carrier services.
Main features:
- accounting
- digest authentication
- CPL scripts
- ENUM support
- instant messaging
- MySQL support
- PostgreSQL support
- a presence agent
- Radius authentication and accounting
- Diameter authentication
- record routing
- SMS gateway
- Jabber gateway
- NAT traversal support transaction module
- registrar
- user location
SER has been extensively and successfuly tested with many SIP products from other vendors (Microsoft, Cisco, Mitel, snom, Pingtel, Siemens, and many others). It has been powering our SIP services continuously for more than two years.

Linux LiveCD Router project allows you to share and firewall your broadband connection and use WIFI.
You can use DSL, ADSL, Cable Modem, T1, Fixed IPs, Dial-Up, WIFI, build you own Access Point and more.
Main features:
- Share and Firewall your broadband or dedicated Internet connection
- Includes Firewall Shorewall and Masquerading (NAT)
- Does not require any installation. It is a LiveCD, your computer simply boots straight from the CD. Does not require a hard disk
- Supports DSL, Cablemodem, Fixed IP and Dial-Up
- Traffic Control, QoS
- DHCP Client and Server
- Remote SSH administration
- Includes DNS Cache to accelerate surfing
- Includes SNMP Monitoring, MRTG graphical statistics
- Use standard and low cost computer, networking and wifi hardware (also USB)
- Can use multiple ethernet and wifi 802.11a/b/g cards. Supports PCI, USB and PCMCIA cards (can replace external Access Points!)
- Linux Software compatible with Windows and Mac Networks

BitWise Routing Server allows multiple PCs behind a router to make direct connections.

The BitWise Routing Server allows you to accept BitWise connections to multiple computers behind a router. Typically, using a router, you would set up port forwarding on BitWises client port (4137), and specify a single destination IP. This is fine until multiple users behind a router all need to accept incoming connections.

As shown by the picture at right, the Routing Server allows individual users to register themselves with the Routing Server, and then the Routing Server accepts all incoming connections and directs those connections to the appropriate user.

The Routing Server requires that your physical router support port forwarding with a way to specify different external and internal ports (this is sometimes labeled "UPnP" by many common home routers).

The Routing Server has several options allowing you to customize the Routing Server for your environment. Many of the options are self-explanatory. The two that are not are Listen on Port and IP filtering. IP filtering is explained in the next section.

The BitWise Routing Server listens on a different port than the BitWise IM client. This allows the Routing Server and the IM client to be run on the same computer without causing conflicts. You will want to set up your router (more detail in a later step) to shift the port of the incoming connections from 4137 to another port. It doesnt particularly matter which port you want to use, as long as it is not a port used by another program. The default port is 4200.

Depending on the complexity of the network, it may be desirable to filter the IP addresses that are allowed to register with the Routing Server. This can be done in the preferences. One very likely scenario would be limiting registrations to the 192.168.1.x IP addresses (192.168 is reserved for local networks). When specifying an IP as the comparison address, you can use any valid IP numbers for wildcards.

In the case shown here, the Routing Server will limit connections to computers having IP addresses of 192.168.1.x. Any number, 0 through 255, could be placed for x in the Routing Server preferences.

If you are not familiar with IP address classes and IP filtering, it will usually be safe to leave Any selected.

Setting up the physical router

The picture at right was taken from a Linksys router, other routers will have a similar capability, although it may be layed out differently. On some routers, the advanced port forwarding options are mistakingly labeled UPnP.

The router setup shows that we are accepting connections on port 4137 and then sending them inside the network on port 4200 (the default port). Enter the IP address of the machine on the network running the Routing Server, and make sure that the rule is enabled. You will want to enter a rule for both TCP and UDP (UDP is used only for voice).

Please consult your router manual for more detailed instructions about how to set up port forwarding on your specific model.

Configuring BitWise to use the Routing Server

In order for you to enjoy the connectivity benefits of the Routing Server, you will need to register with the Routing Server when you log in to BitWise. Prior to logging in to BitWise, click the Setup button next to the Connect button to open the BitWise Setup. There is an area to enter an address for the Routing Server, and to specify what port to use. The port must be the same as the port used above (4200 is the default).

Upon connecting to BitWise, you will be registered with the Routing Server. If you could not be registered, an error message will be displayed. Double-check that the correct address was entered in the Setup.

Registration with the Routing Server

Upon successfully registering with the Routing Server, the Routing Server will display the user name and the IP address of the registration. If you want to unregister a user, click on the username, and then click Unregister. Incoming connections will no longer be forwarded to the specified computer.

It is worth pointing out two things here. First, if you later log in from a different computer, and that computer is also set to use the Routing Server, you will be re-registered with your new IP address. Second, if you are unregistered, or move to another computer but are not set up to use the Routing Server, you will not be able to benefit from the services of the Routing Server.
By default, the Routing Server saves the registered user list when it is closed down.

Using the Routing Server

Assuming that everything is set up correctly, everyone that registers with the Routing Server when they log in to BitWise will be able to enjoy significantly increased connectivity with other BitWise users. As incoming connections are established, you will see the connections listed in the right pane of the Routing Server window. The IP address and the time of the connection is also displayed, and the connection is later marked when it is disconnected.

The disconnected/closed connections may be cleaned from the list at any time using the Clean List button. Only active connections will be left displayed.

File Beamer is an easy to use file transfer tool. The programm is platform independent. That means it runs with Windows 98/ME/2000/XP, Linux, Unix and MacOS X.

This is made possible by using Trolltechs Qt Library which provides an easy to use GUI toolkit, networking functions and a lot more.

File Beamer is free open source software and was released under the GPL license.

Usage:

Receiving files:

Click the "Receive" tab
If the receiver is behind a firewall or router, check "reverse connection" and enter the senders IP or host name. *
Click the "listen" button. The client can now receive files
When receving a file, a "Save as" dialog appears. Choose a place to safe the file.

Sending files:

Click the "Send" tab
If the receiver is behind a firewall or router check "reverse connection" *
Else input the target IP address or host name and port
Select a file to send either by typing the path or by clicking the "..." button
Click the "Send" button (target must be in listen mode)

trackpeer is an agent program that helps network and server administrators with tracking users computers.

It makes it possible to determine the MAC addresses of computers over a network, even when the computers are behind NATed gateways.

This agent program is intended to be used by the administrators who need to identify and locate malicious computers (users) and virus-infected computers in a network such as middle-sized Wireless LAN system, public ethernet jack system, and campus or corporate network.

The program will also be useful for a simple MAC-address-based authentication over a network.

Using MAC addresses has several advantages over other computer/user identification methods, since every ethernet interface has its unique MAC address that cannot be changed easily in many cases.

The agent program has two features, MAC address informing and MAC address logging.

`trackpeerd and `trackpeer are an agent program and a simple client program, respectively. The agent program should run on a gateway (or a packet capturing machine beside it) which resides in the same network segment as the client computers are. We call the router ``frontline router. The agent listens to the communication through the router and caches packets header information.

The client program trackpeer is used when an administrator or a server program would like to know the MAC address of a specific peer, just after a communication action is taken by the peer.

trackpeer provides the agent with the source/destination addresses of a packet, the port numbers of the packet, and the time of the packets arrival. The agent looks into its internal cache memory, picks up the address information that matches the query, and provides the server with the information.

In other words, the server asks the agent,
`` Whos knocked the door at around HH:MM.SS? .

The agent will forget the address information after a certain period of time (10mins) has passed.