Free data recovery commercial software for linux

Zmanda Recovery Manager for MySQL simplifies life of a database administrator who needs an easy to use yet flexible and robust backup and recovery solution for MySQL server. With ZRM for MySQL you can:
- Schedule full and incremental logical or raw backups of your MySQL database
- Perform backup that is the best match for your storage engine and your MySQL configuration
- Get e-mail notification about status of your backups
- Monitor and browse your backups
- Recover database easily to any point in time or to any particular transaction

Poisson Media Recovery project can be used to retrieve slightly damaged files from CD-ROM media.

It sequentially mounts and umounts the device, and on each mount it tries to read as many new 512 byte sectors as possible.

I was able to use this tool to save some files from old CDs.

Make CD-ROM Recovery makes a bootable (El Torito) disaster recovery image (CDrec.iso), including backups of the linux system to the same CD-ROM (or CD-RW) if space permits, or to a multi-volume CD-ROM set. Otherwise, the backups can be stored on another local disk, NFS disk or (remote) tape.

After a disaster (disk crash or system intrusion) the system can be booted from the CD-ROM and one can restore the complete system as it was (at the time mkCDrec was run) with the command /etc/recovery/start-restore.sh

Disk cloning (clone-dsk.sh script) allows one to restore a disk to another disk (the destination disk does not have to be of the same size as it calculates the partition layout itself). A thrid script, restore-fs.sh, will restore only one filesystem to a partition of your choice, and the user can choose with which filesystem the partition has to be formatted.

Linux 2.2.x, 2.4.x and 2.6.x kernels are supported, and if size of the kernel is not too big a boot floppy can be made, otherwise a 2.88 Mb boot floppy will be emulated on CD-ROM.

MkCDrec supports ext2 , ext3, minix, xfs , jfs, reiserfs file systems, LVM and software RAID (multiple devices). Each file system is backed up as a compressed tar archive (including the tar log). The compress program used is the users choice (compress, gzip, bzip2, lzop,...)

But there is more: msdos, fat, vfat and ntfs mounted partitions are recognized and are saved as compressed dumps (on CD, tape, etc.)
The user has the possibility to encrypt all backups with openssl if desired (see the Config.sh configuration file for more information).

To restore your system completely just boot from the first CD-ROM made by mkCDrec and type "/etc/recovery/start-restore.sh " to restore everything from CD. Automatic Disaster Recovery and One Button Disaster Recovery are supported by mkCDrec too.
With the clone-dsk.sh script one can restore selective a disk or partitions to another free disk.

mkCDrec supports IDE (inclusive ATA), SCSI disks, hardware RAID based disks (e.g. Compaq SMART2 Disk Array), LVM and software RAID. With an El-Torito CD-ROM you can boot from an IDE or SCSI based CD-ROM drive on IA32/64, powermac and x86_64 GNU/Linux based computer systems only.

Crash Recovery for Linux sounds a bit superfluous. Linux is regarded as one of todays most stable Operating Systems. In the case of some hardware failure like a broken disk it can however be handy.
Of course your machine doesnt have to have linux installed to make use of the CRK kit. There are several uses and purposes for the CRK to be used. To name a few :
- recovery of a trashed LILO boot record. How many times does it happen that some person installs windows 98/95 after he/she installed linux? Well in that case windows 9X just overwrites the MBR record and linux wont be able to boot anymore.
- backup over the network in the form of tar.gz tarballs. Both FAT16, FAT32, ext2 and all filesystems which Linux supports in a read/write fashion can be taken care of. The strong part of the CRK is when a disk is replaced or repartitioning is being done. The CRK boots a complete mini linux with networking where all possible hardware which is inside the Linux kernel is available.
- Testing hardware of new intel based machines.
- Detecting versions and types of hardware. The Linux kernel holds a large database of hardware supported. Booting a linux kernel doesnt only resolve if the hardware is ok, it also show its specs. This can be handy if one wants to check-out an old/new PC which is for sale.
- Recovery of a misconfigured or hacked Linux system. Well that can happen. /etc/fstab can be wrong or the root password is unknown etc.
- make a tape backup of a disk which cant be booted anymore.
The CRK is based on RedHat Linux. I have always used RedHat systems, thats why. When my system needed maintenance the rescue floppy image which RedHat supplies didnt fullfill my needs.
Thats why i created the CRK. Lately i use Mandrake. How and why the CRK was created read the short history. The CRK is licensed under the GNU Public License (GPL).

Data::TreeDumper is an improved replacement for Data::Dumper. Powerful filtering capability.

SYNOPSIS

use Data::TreeDumper ;

my $sub = sub {} ;

my $s =
{
A =>
{
a =>
{
}
, bbbbbb => $sub
, c123 => $sub
, d => $sub
}

, C =>
{
b =>
{
a =>
{
a =>
{
}

, b => sub
{
}
, c => 42
}

}
}
, ARRAY => [qw(elment_1 element_2 element_3)]
} ;


#-------------------------------------------------------------------
# package setup data
#-------------------------------------------------------------------

$Data::TreeDumper::Useascii = 0 ;
$Data::TreeDumper::Maxdepth = 2 ;

print DumpTree($s, title) ;
print DumpTree($s, title, MAX_DEPTH => 1) ;
print DumpTrees
(
[$s, "title", MAX_DEPTH => 1]
, [$s2, "other_title", DISPLAY_ADDRESS => 0]
, USE_ASCII => 1
, MAX_DEPTH => 5
) ;

Output:

title:
|- A [H1]
| |- a [H2]
| |- bbbbbb = CODE(0x8139fa0) [C3]
| |- c123 [C4 -> C3]
| `- d [R5]
| `- REF(0x8139fb8) [R5 -> C3]
|- ARRAY [A6]
| |- 0 [S7] = elment_1
| |- 1 [S8] = element_2
| `- 2 [S9] = element_3
`- C [H10]
`- b [H11]
`- a [H12]
|- a [H13]
|- b = CODE(0x81ab130) [C14]
`- c [S15] = 42

Common Data Format is a self-describing data abstraction for the storage and manipulation of multidimensional data in a platform- and discipline-independent fashion.
It consists of a scientific data management package (known as the "CDF Library") that allows programmers and application developers to manage and manipulate scalar, vector, and multi-dimensional data arrays.
Enhancements:
- Adds new sets of APIs to allow Standard Interface to interact with zVariables and other CDF-related information.
- Adds MingW and FreeBSD ports.
- Adds support for Intel C++ and Fortran for Linux.
- Adds the ability to create legacy CDF 2.7 files.
- Fixes a bug that prevented directories from having .cdf or .skt extensions.

Sunrise Data Dictionary is a library for hashtable storage of arbitrary data objects with built-in reference counting and guaranteed order iteration for the C programming language.
Sunrise Data Dictionary library can participate in external reference counting systems or use its own built-in reference counting. It comes with a variety of hash functions and allows the use of runtime supplied hash functions via callback mechanism. The source code is well documented.
The Sunrise Data Dictionary was specifically designed for use within the Afelio and Callweaver telephony servers, the implementation focuses on performance and scalability.
Enhancements:
- This is the initial release of the full API (all header files) and a developer snapshot of the implementation.