Free cubetto toolset software for linux

IRRToolSet is a set of policy analysis tools, written in C++. IRRToolSet is designed to run under UNIX, using Tcl/Tk for graphics.
There are tools for generating router configuration files, displaying and checking routes, generating aggregations of networks, etc. This project was formerly known as the Routing Arbiter ToolSet (RAToolset), and was maintained by ISI.
Main features:
RtConfig
- analyzes the routing policies registered in the Internet Routing Registry (IRR) and produces router configuration files;
CIDRAdvisor
- suggests safe cidr aggregates (i.e. those that do not violate any policy constraints) that an Autonomous System (AS) can advertise to each of its neighbour ASes;
peval
- low level policy evaluation tool that can be used to write router configuration generators;
prtraceroute
- prints the route and policy information packets take to a network host;
prpath
- enumerates a list of paths between Autonomous System and specified destination;
aoe
- C++/Tcl/Tk program that displays the aut-num object for the specified Autonomous System;
roe
- C++/Tcl/Tk program that lists the routes registered by the specified autonomous system;
rpslcheck(prcheck)
- syntax-checks the aut-num object for Autonomous System registered in the Internet Routing Registry (IRR).
Enhancements:
- Bugfixes for BSD-based operating systems.

VK Toolset project is intended to aide MPEG developers and hobbyist in understanding and creating conformant MPEG streams.
The current version focuses on the MPEG system layer (MPEG-1 System, MPEG-2 Program Stream), and MPEG-2 Transport bitstreams).
Enhancements:
vk_tafe
- UI changes to PCR Analysis screen
- New PTS/DTS graph (graphs PTS/DTS values against current PCR)
- UI log for STD buffer analysis
- Updated HTML documentation
- Target build platform updated to a "modern" distro -- SuSE 10. The older Mandrake version is frozen at version 0.8f which is still included in the VK-Tools packets
- Updated win32 port
view_knot_dump
- UI no longer depends on icons subdirectory to properly display
- If local .view_knot_view config does not specify the location of vk_tafe we assume its somewhere in the PATH and try to launc it
- Updated HTML documentation
- Target build platform updated to a "modern" distro -- SuSE 10. The older Mandrake version is frozen at version 0.8f which is still included in the VK-Tools packets
- Updated win32 port
- Removed Plugins. Theyve only been broken for 5 years now :)
view_knot_viewer
- No changes

The mkCDrec utilities are optional for mkCDrec itself, but are an added value for rescue and recovery purposes.

The utilities are staticly compiled and include parted, memtest, partimage, gpart, and recover. Memtest86 is also available for memory testing.

To improve the added value of your recovery/rescue CD-ROM. You will notice that links from mkCDrec CD-ROM are foreseen to the /cdrom/utilities part of the CD-ROM and that man pages of these tools are already available within mkCDrec main toolset.

Without installing the utilities you cannot use them (obvious), but it will not break any other functionality of the mkCDrec tools. Therefore, a full restore remains possible (and disk cloning too), but you will not be able to resize a partition afterwards to name something.

Most of these utilities were compiled as static binaries, therefore, you can use those tools seperately too. If you know any tool which could useful to be included, please let me know... Since mkCDrec_utils_v0.5.7 you will notice that mkCDrec will use isolinux to boot from the CD-ROM instead of using syslinux floppy boot emulation.

But, this will only work if you use mkCDrec_v0.5.7 (or higher) as isolinux was first introduced in v0.5.7.

Parted

The famous Partition Editor of GNU software. The User Manual of parted is already part of mkCDrec.

Memtest

An excellent memory testing tool.

Partition Image

A tool to make/restore partition of msdos/vfat/ext2/reiserfs file systems. The primary purpose to include this tool is to allow a restore of old partition images made by this tool.

Gpart

Guess partition does what it implies. It can even recover destroyed partition tables, and therefore, maybe preventing a full restore. Useful in case if you do not make a mkcdrec on a regular basis.

Recover

An excellent tool to edit an EXT2 file system to recover lost files.

e2salvage

e2salvage is a utility which tries to recover a data from damaged ext2 partition. It may be used when e2fsck does not recover the broken ext2 filesystem. Before trying this tool read the man page (man e2salvage).

ext2resize

ext2resize, ext2prepare and ext2online are useful tools. ext2resize can increase (or decrease) the size of an unmounted ext2 filesystem. Be aware for ext2online one need a kernel patch (not likely installed). By the way, ext2resize does work too on an Ext3 filesystem! Be aware, one needs to apply S. Tweedies kernel patch (ext3) and an updated ext2 filesystem e2fprogs-1.20 or higher (which are ext3 aware). Last 2 requirements are of course only needed in case if you want to work with ext3 filesystems.

memtest86

Memtest86 is thorough, stand alone memory test for x86 architecture computers. BIOS based memory tests are only a quick check and often miss many of the failures that are detected by Memtest86.

chntpw

The offline NT password editor (chntpw) is a little program wich enables you to view and change passwords in a Windows NT SAM user database. For example,

Installation

# cd mkcdrec; tar zxvf mkCDrec_v0.7.9_utils.tar.gz
# ls -l utilities

anyfs-tools is a unix-way toolset for recovering and converting filesystems.
SYNOPSIS
build_it [-qvV] directory inode_table
anysurrect [-b blocksize] [-i input_inode_table] [-p path_prefix] [-u file_umask] [-U dir_umask] [-qvV] device inode_table
reblock [-nqvV] inode_table device blocksize
build_e2fs [ -c|-l filename ] [-b blocksize] [-f fragment-size] [-g blocks-per-group] [-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] [-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] [-r fs-revision-level] [-R raid-options] [-v] [-F] [-L volume-label] [-M last-mounted-directory] [-S] [-T filesystem-type] [-V] inode_table device [blocks-count]
mount -t any -o inodetable=file.it[,other_mount_options] device dir
build_it reads from directory recursively information about all filesystem inodes using filesystem driver (read-only maybe) for Linux OS and saves it to external inode table.
anysurrect search on device files proceeds from knowing different file types structure. Information about founded files also saves to external inode table.
reblock change filesystem block size. reblock using information from inode table change each files fragments placing so, that it was align by blocks bounds with new size.
build_e2fs proceeds from external inode table information for building ext2fs filesystems on device.
anyfs filesystem driver for Linux allows to mount device using inode table information. At mounted filesystem will be allow so file operations as deleting, moving files; making symbolic and hard links, special files; changing file access permissions. All this changes saves on unmounting to the same external inode table file and doesnt affect the device.
Usage:
Convert filesystems
anyfs-tools allows to convert filesystems. The only one requirement for source filesystem exist: there is must be FIBMAP system call ioctl(2) support in the filesystem driver (maybe read-only) for Linux OS.
Destination filesystem at that moment maybe only ext2fs. But its quite possible, that in future there are will other filesystem building support. At the first it must be interest for filesystem maintainers so as existing of convenient tool for converting of other filesystems to their one, not requesting much free space for saving of all user data, certainty will increase of the filesystem users.
In general, an applying anyfs-tools order for filesystem converting must be next:
1) build_it for reading all informaton about files placing and access permissions and saving it to external inode table file.;
2) anyfs driver for checking existence of all needed files and maybe searching of files requiring of separately saving (e.g, files eith size less than 4 Kb for ReiserFS);
3) maybe reblock for changing filesystem blocksize in occurence when destination filesystem dont support the same blocksize for this device, that source one;
4) at last ext2fs filesystem builds by build_e2fs.
Recovering damaged filesystem
For recovering files from filesystem at first intended anysurrect. After it using possible applying of anyfs filesystem drive for founded files viewing and maybe reading and saving it to another filesystem. Driver also may allow to sort files into directories so as user need in it, rename files as it necessary. At last also possible to build new filesystem with help of build_e2fs.
Recovering files from not damaged filesystem
For file recovering an aplying anyfs-tools tools order is the same that for recovering damaged filesystem excepting that at the begining you must execute build_it for reading about present filesystem file placing.
Enhancements:
- Fix anyfs building with kernel version >=2.6.19
- Some other building fix
- Fix new (from v0.84.10) i/o buffer bug in anysurrect.
- Extremally optimize anysurrect.
- Add -s option to build_it.
- Add support of converting from ntfs-3g by anyconvertfs.

pHoToMoLo is a toolset for managing JPEG images in Exif or JFIF format. Photomolo generates a static HTML 4.01- and CSS 1-based multi-resolution image gallery for a directory tree containing images.

Exifiron losslessly compresses and corrects the orientation of Exif JPEG images. Jpegnail removes or embeds thumbnails. Jpegcom lets you edit embedded image comments using any text editor and image viewer.

A shell script frontend for Exifiron is included for copying images from removable storage, such as USB or Compact Flash.+

photomolo

generates a static HTML and CSS based multi-resolution image gallery for a directory tree containing images

exifiron

losslessly compresses and corrects the orientation of Exif JPEG images.

jpegnail

removes or embeds thumbnails to reduce file size or to speed up programs that make use of embedded thumbnails

jpegcom

lets you edit embedded image comments using any text editor and image viewer

Installation:

The "photomolo", "exifiron" and "jpegnail" utilities depend on the JPEG library by the Independent JPEG Group.

The files in the "examples" directory are in the public domain. They are not installed by default, as you will probably want to adapt them for your needs.

The "photocopy" script is a simple front-end for exifiron, for copying and optimising images from the file system of a digital camera.

To build and install the "photomolo", "exifiron", "jpegnail" and "jpegcom" programs on Debian GNU/Linux, you may use the following commands:

apt-get install libjpeg62-dev
make
make PREFIX=/usr/local install installman

To build the programs on other Unix-like systems:

# get and unpack the libjpeg source code
wget ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz
gzip -dc jpegsrc.v6b.tar.gz | tar xf -
# compile libjpeg
cd jpeg-6b; ./configure; make; cd ..
# unpack the photomolo source code
gzip -dc photomolo-1.2.4.tar.gz | tar xf -
# compile "photomolo", "exifiron", "jpegnail" and "jpegcom"
cd photomolo-1.2.4
make INCLUDES=-I../jpeg-6b LIBS=../jpeg-6b/libjpeg.a
make PREFIX=/usr/local install installman

Neverwinter Nights (NWN) is a computer game set in a huge medieval fantasy world of Dungeons and Dragons. Neverwinter Nights puts you at the center of an epic tale of faith, war, and betrayal.

As a player, you are able to choose what skills and abilities you will develop as you voyage though the complex and dangerous fantasy world of Forgotten Realms. Be a deadly and dangerous Rogue moving through the shadows using stealth and secrecy, be a scholarly Wizard and wield powerful magic against your enemies, be a hulking Barbarian whose lust for battle is matched only by his terrible rage, be an armor-clad Paladin who protects the innocent and vanquishes his foes, be a crusading Cleric who heals the sick and defends the helpless… be all this and more.

Neverwinter Nights allows you to create your own worlds. This revolutionary game will come with all the tools needed to construct your own unique lands of adventure. The Neverwinter Nights Aurora Toolset allows even novice users to construct everything from a quiet, misty forest or a dripping cavern of foul evil, to a kings court. All the monsters, items, set pieces and settings are there for world builders to use. But do not stop there; construct traps, encounters, custom monsters and magic items to make your adventure unique.

But the Neverwinter experience is not just for one person- adventure with all your friends. Neverwinter Nights can be played online with up to 64 friends, all sharing in the adventure. You can organize and run your own adventures through the role of the Dungeon Master and control all the monsters, creatures and characters your friends meet as they journey on their quest. A powerful piece of software that is included with Neverwinter Nights, the DM Client, allows nearly unlimited control for running your own adventures for your friends.

Neverwinter Nights…endless adventure!

1. Download the appropriate update file and put it in your Linux Neverwinter Nights directory (the directory containing nwserver).

2. Remove the BioWare-supplied contents of your override directory. If you have not placed any files in this directory yourself, you can do

rm -f override/*

You may wish to backup your override directory if you plan to revert to an earlier version at some point.

3. If present, remove patch.key, data/patch.bif, xp1patch.key, and data/xp1patch.bif

rm patch.key
rm data/patch.bif
rm xp1patch.key
rm data/xp1patch.bif

4. Unpack the file using the command

tar -xzf linuxserverupdate1xxto166.tar.gz

5. Download the dialog.tlk file(s) appropriate for your language from the Known Issues page, and place in it your Linux Neverwinter Nights directory (alternatively, copy them from an updated Win32 Neverwinter Nights installation).

Neverwinter Nights (NWN) is a computer game set in a huge medieval fantasy world of Dungeons and Dragons. Neverwinter Nights puts you at the center of an epic tale of faith, war, and betrayal.

As a player, you are able to choose what skills and abilities you will develop as you voyage though the complex and dangerous fantasy world of Forgotten Realms. Be a deadly and dangerous Rogue moving through the shadows using stealth and secrecy, be a scholarly Wizard and wield powerful magic against your enemies, be a hulking Barbarian whose lust for battle is matched only by his terrible rage, be an armor-clad Paladin who protects the innocent and vanquishes his foes, be a crusading Cleric who heals the sick and defends the helpless… be all this and more.

Neverwinter Nights allows you to create your own worlds. This revolutionary game will come with all the tools needed to construct your own unique lands of adventure. The Neverwinter Nights Aurora Toolset allows even novice users to construct everything from a quiet, misty forest or a dripping cavern of foul evil, to a kings court. All the monsters, items, set pieces and settings are there for world builders to use. But do not stop there; construct traps, encounters, custom monsters and magic items to make your adventure unique.

But the Neverwinter experience is not just for one person- adventure with all your friends. Neverwinter Nights can be played online with up to 64 friends, all sharing in the adventure. You can organize and run your own adventures through the role of the Dungeon Master and control all the monsters, creatures and characters your friends meet as they journey on their quest. A powerful piece of software that is included with Neverwinter Nights, the DM Client, allows nearly unlimited control for running your own adventures for your friends.

Neverwinter Nights…endless adventure!