create windows 98se startup disk
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 6724
Game Server Startup Script 1.1
Game Server Startup Script project is a startup script to manage dedicated game servers like Quake3. more>>
Game Server Startup Script project is a startup script to manage dedicated game servers like Quake3.
Game Server Startup Scripts is a startup script to manage a wide variety of Linux dedicated game servers. It can start/stop/restart/fix dedicated game servers like Quake3, Half Life, Tribes 2, UT2K4, BF1942 and others.
It uses qstat through cron to validate that a game is running as expected. If a game is not running as expected, the game is automatically restarted from the script through cron.
GSSS was written becuase I wanted a way to start up a variety of games in a standard way. Then I also wanted to make sure the games stayed running even after a crash.
So I wrote this perl script. It will start games and through a cron job make sure they stay running. If you have qstat installed it can also verify the game is running like it is suppose to be and not in some strange state where no one can play.
If the game is running but unresponsive, it kills it and starts it again. You can also stop running games cleanly as well.
Games supported by "Game Server Startup Script":
- Quake2
- Quake3
- RTCW
- Half Life
- Unreal
- UT2K3
- UT2K4
- Tribes 2
- NWN
- BF1942
- ET
Enhancements:
- Very minor changes, minor readme changes, clean up
<<lessGame Server Startup Scripts is a startup script to manage a wide variety of Linux dedicated game servers. It can start/stop/restart/fix dedicated game servers like Quake3, Half Life, Tribes 2, UT2K4, BF1942 and others.
It uses qstat through cron to validate that a game is running as expected. If a game is not running as expected, the game is automatically restarted from the script through cron.
GSSS was written becuase I wanted a way to start up a variety of games in a standard way. Then I also wanted to make sure the games stayed running even after a crash.
So I wrote this perl script. It will start games and through a cron job make sure they stay running. If you have qstat installed it can also verify the game is running like it is suppose to be and not in some strange state where no one can play.
If the game is running but unresponsive, it kills it and starts it again. You can also stop running games cleanly as well.
Games supported by "Game Server Startup Script":
- Quake2
- Quake3
- RTCW
- Half Life
- Unreal
- UT2K3
- UT2K4
- Tribes 2
- NWN
- BF1942
- ET
Enhancements:
- Very minor changes, minor readme changes, clean up
Download (0.014MB)
Added: 2006-11-21 License: GPL (GNU General Public License) Price:
1084 downloads
AXIGEN Mail Server StartUp Edition 1.2.2
AXIGEN FREE mail server - (E)SMTP, POP3, IMAP4, Webmail server and support more>> AXIGEN StartUp Edition is a FREE, reliable and secure mail server for 9 users and 1 domain intended for home users and small companies. AXIGEN Mail Server, offering integrated mail services and basic support, can successfully replace several open source applications.
This is a full-featured version, available free of charge, part of a time-limited promotional offer. This type of license offered is perpetual and you will get to keep it even if this promotion expires.
AXIGEN is available for many Linux distributions (Gentoo, Redhat/Fedora Core, Slackware, Debian, Ubuntu, Mandrake/Mandriva, SUSE), FreeBSD, OpenBSD and NetBSD - see the AXIGEN download page for the corresponding download kit: http://www.axigen.com/mail-server/downloads.php.
Main AXIGEN services:
1. Mail transfer is ensured by SMTP / ESMTP modules, which include a powerful Mail Processing engine with a script interface for custom filtering.
2. Message retrieval is performed through IMAP4 or POP3 protocols with special tools for connectivity control and host authentication management.
3. The Webmail module provides improved security and allows users anywhere on the Internet to access and send mails from their Web browsers.
All services are controlled from centralized WEB / CLI Administration, enabling full control of the email traffic.
AXIGEN Mail Server Specifications:
Mail Services
- SMTP/ESMTP, POP3, IMAP4 and Webmail
- SSL/TLS encryption
- Integrated List server
Connectivity and architecture:
- Multithreaded engine with module thread control
- Simultaneous resource access
- Mail storage with index based access
- In depth connection control
- Firewall-like communication rules
- User authentication: plain, CRAM MD5
Message Filtering
- Multilevel filtering system (server level, domain level, user level)
- Antivirus and AntiSPAM support
- Script interface for external custom filters
Download your copy now!<<less
Download (10800K)
Added: 2009-04-15 License: Freeware Price: Free
192 downloads
Other version of AXIGEN Mail Server StartUp Edition
AXIGEN FREE mail server - (E)SMTP, POP3, IMAP4 ...AXIGEN StartUp Edition is a modular, FREE mail server for 9License:Freeware
Create short URLs 0.1
Create a short URLs is a Firefox extension that allows you to create a short URL from any website. more>>
Create a short URLs is a Firefox extension that allows you to create a short URL from any website.
Are you annoyed with really long URLs like: http://www.succor.co.uk/index.cfm/2006/4/7/wapurlcouk-beta-launch
Then this tag is for you. Just right click on the page and click wapURL and you will be presented with a short URL. This is great if you need to send text messages or emails.
When you use the short URL the key passed is looked up against our database and the user in then redirected to your requested URL.
<<lessAre you annoyed with really long URLs like: http://www.succor.co.uk/index.cfm/2006/4/7/wapurlcouk-beta-launch
Then this tag is for you. Just right click on the page and click wapURL and you will be presented with a short URL. This is great if you need to send text messages or emails.
When you use the short URL the key passed is looked up against our database and the user in then redirected to your requested URL.
Download (0.076MB)
Added: 2007-05-07 License: MPL (Mozilla Public License) Price:
915 downloads
AmarokFS Startup Script 1.1
AmarokFS Startup Script simply provides a shortcut for starting AmarokFS (Amarok Full Screen) from within Amarok itself. more>>
AmarokFS Startup Script simply provides a shortcut for starting AmarokFS ("Amarok Full Screen") from within Amarok itself.
AmarokFS itself can be downloaded from: http://www.kde-apps.org/content/show.php?content=52641
Installation:
Download the .amarokscript.tar file and install it with Amaroks script installer.
Usage:
Upon startup, the script will automatically look for the "amarokFS" executable in your PATH, and if not found, will prompt you for its location.
Once the script is running, you will have an "AmarokFS" menu entry in your playlist popup menu; now simply select "Run Amarok Full Screen" to activate AmarokFS.
The script can also be configured to use an amarokFS executable other than the one detected in the users PATH.
<<lessAmarokFS itself can be downloaded from: http://www.kde-apps.org/content/show.php?content=52641
Installation:
Download the .amarokscript.tar file and install it with Amaroks script installer.
Usage:
Upon startup, the script will automatically look for the "amarokFS" executable in your PATH, and if not found, will prompt you for its location.
Once the script is running, you will have an "AmarokFS" menu entry in your playlist popup menu; now simply select "Run Amarok Full Screen" to activate AmarokFS.
The script can also be configured to use an amarokFS executable other than the one detected in the users PATH.
Download (0.030MB)
Added: 2007-03-29 License: GPL (GNU General Public License) Price:
941 downloads
Create CVSup 0.1.6
Create CVSup is a script that will create a cvsup server mirror for FreeBSD, NetBSD, and OpenBSD. more>>
Create CVSup is a script that will create a cvsup server mirror for FreeBSD, NetBSD, and OpenBSD.
Create CVSup script has been tested and is known to work under FreeBSD, NetBSD, and OpenBSD.
<<lessCreate CVSup script has been tested and is known to work under FreeBSD, NetBSD, and OpenBSD.
Download (0.004MB)
Added: 2005-12-07 License: BSD License Price:
1416 downloads
Create New Template Service Menu 0.2.1
Create New Template Service Menu is a context menu item for KDE and Konqueror that automates adding Create New... menu entries. more>>
Create New Template Service Menu is a context menu item for KDE and Konqueror that automates adding Create New... menu entries from existing files. It adds a "Create Template" item to the Actions submenu of the context menu. It consists of a service menu .desktop file and a shell script.
KDE Create New Template Service Menu
This service menu removes the hassle of hand-coding Create New... menu entries. It is accessed by right-clicking regular file icons on the desktop or in Konqueror, pointing to Actions, and selecting Create Template.
It consists of a service menu .desktop file and a Bash shell script. The Create Template service menu runs a shell script that brings up two dialogs--one for choosing an icon to associate with the Create New... menu entry, and the other for entering the menu item text itself. It uses this information to write a Create New... menu item .desktop file. The shell script bases the name of the .desktop file on the name of the document file clicked on from the desktop and places a copy of the file in the .sources subdirectory of ~/.kde/share/templates.
The service menu should be placed in ~/.kde/share/apps/konqueror/servicemenus and the shell script in ~/bin.
I suggest that users first install the Simple Service Menu Installer available from http://www.kde-apps.org/content/download.php?content=23760&id=1. That service menu provides the same service for installable service menus that mine does for document templates and will greatly simplify the process of installing this service menu. After downloading that service menu just right-click on it, point to Actions, point to Install Service, and click one of the options available on the submenu. Then to install my service menu, just follow the same proceedure and place the shell script in your personal ~/bin directory.
From that point on you will have a nice, simple method of adding both installable service menus and templates to the KDE context menu.
This project is released under the terms of the GNU GPL v.2.0.
Enhancements:
- Changed menu icons to more appropriate ones.
<<lessKDE Create New Template Service Menu
This service menu removes the hassle of hand-coding Create New... menu entries. It is accessed by right-clicking regular file icons on the desktop or in Konqueror, pointing to Actions, and selecting Create Template.
It consists of a service menu .desktop file and a Bash shell script. The Create Template service menu runs a shell script that brings up two dialogs--one for choosing an icon to associate with the Create New... menu entry, and the other for entering the menu item text itself. It uses this information to write a Create New... menu item .desktop file. The shell script bases the name of the .desktop file on the name of the document file clicked on from the desktop and places a copy of the file in the .sources subdirectory of ~/.kde/share/templates.
The service menu should be placed in ~/.kde/share/apps/konqueror/servicemenus and the shell script in ~/bin.
I suggest that users first install the Simple Service Menu Installer available from http://www.kde-apps.org/content/download.php?content=23760&id=1. That service menu provides the same service for installable service menus that mine does for document templates and will greatly simplify the process of installing this service menu. After downloading that service menu just right-click on it, point to Actions, point to Install Service, and click one of the options available on the submenu. Then to install my service menu, just follow the same proceedure and place the shell script in your personal ~/bin directory.
From that point on you will have a nice, simple method of adding both installable service menus and templates to the KDE context menu.
This project is released under the terms of the GNU GPL v.2.0.
Enhancements:
- Changed menu icons to more appropriate ones.
Download (0.002MB)
Added: 2007-03-07 License: GPL (GNU General Public License) Price:
965 downloads
Create Your Own Adventure 0.4 Beta
Create Your Own Adventure project is an interactive adventure in which the users themselves write the adventure. more>>
Create Your Own Adventure project is an interactive adventure in which the users themselves write the adventure. When the user reaches the end of the adventure, the user will be given the option to continue writing the next part of the adventure.
The user can upload a picture (in any format supported by Web browsers) and define how many choices the player will have. Its possible to connect choices to other parts of the story simply by selecting the chapter number from the dropdown list next to the choice.
<<lessThe user can upload a picture (in any format supported by Web browsers) and define how many choices the player will have. Its possible to connect choices to other parts of the story simply by selecting the chapter number from the dropdown list next to the choice.
Download (0.014MB)
Added: 2007-06-28 License: GPL (GNU General Public License) Price:
851 downloads
create Image 1.0
create Image is an amarok script that can create an image of the current playlist and save the files to an iso image. more>>
create Image is an amarok script that can create an image of the current playlist and save the files to an iso image.
The iso image is found in the respective home folders.
<<lessThe iso image is found in the respective home folders.
Download (0.010MB)
Added: 2007-01-11 License: GPL (GNU General Public License) Price:
1023 downloads
Data::Startup 0.04
Data::Startup is a Perl module with startup options class, override, config methods. more>>
SYNOPSIS
######
# Subroutine interface
#
use Data::Startup qw(config override);
$options = override(%default_options, @option_list );
$options = override(%default_options, @option_list );
$options = override(%default_options, %option_list );
@options_list = config(%options );
($key, $old_value) = config(%options, $key);
($key, $old_value) = config(%options, $key => $new_value );
($key, $old_value) = config(%options, $key => $new_value );
@old_options_list = config(%options, @option_list);
@old_options_list = config(%options, @option_list);
@old_options_list = config(%options, %option_list);
######
# Object interface
#
use Data::Startup
$startup_options = $class->Data::Startup::new( @option_list );
$startup_options = $class->Data::Startup::new( @option_list );
$startup_options = $class->Data::Startup::new( %option_list );
$options = $startup_options->override( @option_list );
$options = $startup_options->override( @option_list );
$options = $startup_options->override( %option_list );
@options_list = $options->config( );
($key, $old_value) = $options->config($key);
($key, $old_value) = $options->config($key => $new_value );
($key, $old_value) = $options->config($key => $new_value );
@old_options_list = $options->config(@option_list);
@old_options_list = $options->config(@option_list);
@old_options_list = $options->config(%option_list);
# Note: May use [@option_list] instead of @option_list
# and {@option_list} instead of %option_list
Many times there is a group of subroutines that can be tailored by different situations with a few, say global variables. However, global variables pollute namespaces, become mangled when the functions are multi-threaded and probably have many other faults that it is not worth the time discovering.
As well documented in literature, object oriented programming do not have these faults. This program module class of objects provide the objectized options for a group of subroutines or encapsulated options by using the methods directly as in an option object.
The Data::Startup class provides a way to input options in very liberal manner of either
- arrays, reference to an array, or reference to hash to a
- reference to an array or reference to a hash
- reference to a hash
- referene to an array
- many other combos
without having to cut and paste specialize, tailored code into each subroutine/method.
<<less######
# Subroutine interface
#
use Data::Startup qw(config override);
$options = override(%default_options, @option_list );
$options = override(%default_options, @option_list );
$options = override(%default_options, %option_list );
@options_list = config(%options );
($key, $old_value) = config(%options, $key);
($key, $old_value) = config(%options, $key => $new_value );
($key, $old_value) = config(%options, $key => $new_value );
@old_options_list = config(%options, @option_list);
@old_options_list = config(%options, @option_list);
@old_options_list = config(%options, %option_list);
######
# Object interface
#
use Data::Startup
$startup_options = $class->Data::Startup::new( @option_list );
$startup_options = $class->Data::Startup::new( @option_list );
$startup_options = $class->Data::Startup::new( %option_list );
$options = $startup_options->override( @option_list );
$options = $startup_options->override( @option_list );
$options = $startup_options->override( %option_list );
@options_list = $options->config( );
($key, $old_value) = $options->config($key);
($key, $old_value) = $options->config($key => $new_value );
($key, $old_value) = $options->config($key => $new_value );
@old_options_list = $options->config(@option_list);
@old_options_list = $options->config(@option_list);
@old_options_list = $options->config(%option_list);
# Note: May use [@option_list] instead of @option_list
# and {@option_list} instead of %option_list
Many times there is a group of subroutines that can be tailored by different situations with a few, say global variables. However, global variables pollute namespaces, become mangled when the functions are multi-threaded and probably have many other faults that it is not worth the time discovering.
As well documented in literature, object oriented programming do not have these faults. This program module class of objects provide the objectized options for a group of subroutines or encapsulated options by using the methods directly as in an option object.
The Data::Startup class provides a way to input options in very liberal manner of either
- arrays, reference to an array, or reference to hash to a
- reference to an array or reference to a hash
- reference to a hash
- referene to an array
- many other combos
without having to cut and paste specialize, tailored code into each subroutine/method.
Download (0.073MB)
Added: 2007-02-15 License: Perl Artistic License Price:
982 downloads
Create PlayList 0.1
Create PlayList is a service menu for KDE which will create a M3U playlist file with .mp3, .ogg, .wav files into the directory. more>>
Create PlayList is a service menu for KDE and has been tested with kde 3.5.4 and 3.5.5.
The service is available over directories. It will create a M3U playlist file with .mp3, .ogg, .wav... files into the directory. Filename can be changed.
To create M3U playlist file the script uses a program called "fapg" (http://royale.zerezo.com/fapg/). Thanks for making our live a little bit easier.
To install:
- Copy "create-m3u-playlist.desktop" to YOURHOME/.kde/share/apps/konqueror/servicemenus/
- Copy "playlister" to any directory included into your $PATH (i.e. /usr/local/bin your may be root to do this) and give it execution permision (i.e. chmod 755 playlister as root)
- Make sure "fapg" is installed in your system.
<<lessThe service is available over directories. It will create a M3U playlist file with .mp3, .ogg, .wav... files into the directory. Filename can be changed.
To create M3U playlist file the script uses a program called "fapg" (http://royale.zerezo.com/fapg/). Thanks for making our live a little bit easier.
To install:
- Copy "create-m3u-playlist.desktop" to YOURHOME/.kde/share/apps/konqueror/servicemenus/
- Copy "playlister" to any directory included into your $PATH (i.e. /usr/local/bin your may be root to do this) and give it execution permision (i.e. chmod 755 playlister as root)
- Make sure "fapg" is installed in your system.
Download (0.002MB)
Added: 2006-12-11 License: GPL (GNU General Public License) Price:
1056 downloads
Image Create for PHP 1.1.1
Image Create for PHP is a project which allows you to render text into an image on the fly. more>>
Image Create for PHP is a project which allows you to render text into an image on the fly.
Image Create for PHP is a stand-alone script that allows you to create dynamic text images easily.
<<lessImage Create for PHP is a stand-alone script that allows you to create dynamic text images easily.
Download (0.005MB)
Added: 2007-03-12 License: GPL (GNU General Public License) Price:
966 downloads
Early Macintosh Image LoadEr 0.11
Early Macintosh Image LoadEr allows to boot linux-m68k from a floppy on a macintosh such as MacII or Quadra 610. more>>
Early Macintosh Image LoadEr allows to boot linux-m68k from a floppy on a macintosh such as MacII or Quadra 610.
With it, you can create rescue disk, or remove the MacOS partition (needed by the legacy penguin booter) from your HD.
Create a floppy from rescue disk image
You can find floppy image from the package emile-rescue
Under linux, the command to dump image to floppy is:
# dd if=emile-rescue-x.y.bin of=/dev/fd0 bs=512 conv=sync
then, you can eject floppy with:
# eject /dev/fd0
If you are using MacOS, use MakeDebianFloppy AppleScript (you must use a floppy image with a size of exactly 1474560 bytes).
Enhancements:
- This release has improved SCSI support, allows you to create a bootable CD-ROM, adds Debian packaging, updates the PowerPC part (currently not usable), and introduces apple_driver (currently not usable).
<<lessWith it, you can create rescue disk, or remove the MacOS partition (needed by the legacy penguin booter) from your HD.
Create a floppy from rescue disk image
You can find floppy image from the package emile-rescue
Under linux, the command to dump image to floppy is:
# dd if=emile-rescue-x.y.bin of=/dev/fd0 bs=512 conv=sync
then, you can eject floppy with:
# eject /dev/fd0
If you are using MacOS, use MakeDebianFloppy AppleScript (you must use a floppy image with a size of exactly 1474560 bytes).
Enhancements:
- This release has improved SCSI support, allows you to create a bootable CD-ROM, adds Debian packaging, updates the PowerPC part (currently not usable), and introduces apple_driver (currently not usable).
Download (0.17MB)
Added: 2007-03-29 License: GPL (GNU General Public License) Price:
943 downloads
NCurses Disk Usage 1.3
NCurses Disk Usage provides a fast and easy interface to your harddrive. more>>
As the name already suggests, ncdu is an NCurses version of the famous old du unix command.
NCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
<<lessNCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
Download (0.089MB)
Added: 2007-08-06 License: MIT/X Consortium License Price:
813 downloads
Pocket Linux 2.51
Pocket Linux is an almost minimal, one floppy linux system designed to quickly convert PC workstation into a secure linux. more>>
Pocket Linux is an almost minimal, one floppy linux system designed to quickly convert PC workstation into secure linux-based workstation using ssh to connect to remote host (other networking clients are also supported).
It supports bootp for determining host IP and other network parameters (theres also manual configuration possible, but bootp is recommended).
In addition to workstations equipped with a network card (ethernet or arcnet), you can also use Pocket Linux on a PC equipped with a modem. Modem is automatically detected and then PPP connection is made.
The idea came up some time in 1996 or so. The distribution then was not perfect, but still it shown it was a great idea. It wasnt maintained for about year or so, until I took it up again in the early January 1998. After a complete rebuild Pocket Linux 2.00 was released. It soon gained a huge number of happy users, whose ideas helped its development.
The aim is to provide a small and efficient workstation that autoconfigures as much as possible and lets securely use the network from almost everywhere.
Current version is a nice attempt and future ones will enhance the automation and support for various network equipment and protocols, becoming a total solution. Future plans also include side projects like one floppy router.
In order to understand some of the config options its useful to know something about operations that are done during bootup (in order to automatically configure the network). These are, in order (the later attempts are made if the earlier ones dont set-up the network):
- attempt to setup the network using BOOTP
- attempt to reuse previous manual configuration
- modem detection
- attempt to setup modem conection
Most of the config options switches these operations on and off.
Main menu
You can choose the following network configuration commands from the main menu (only the ones that make sense in the present context are displayed):
- Options - allows setting few binary parameters controlling automatic network configuration and modem handling.
- BOOTP query - attempts to configure network (ethernet or arcnet) using BOOTP. Normally its automatically done during bootup, but this can be switched off.
- Manual configuration - allows manual setting of network configuration parameters (ethernet or arcnet).
- Detect modem - detects serial port the modem is on and its parameters (transfer rate, initialization commands).
- Dial PPP using predefined configuration - creates modem connection (PPP) using one of (up to ten) remembered configurations. By default only TPSA (0202122) configuration is remembered.
- Dial PPP using new configuration - creates new PPP configuration and sets up a modem connection using the newly created config.
- Disconnect PPP - disconnects modem connection.
- Mount /usr via NFS - mounts remote /usr filesystem via NFS. It will be automatically mounted during each Pocket Linux bootup if its turned on in configuration options.
- Exit - Do not config the network - exits the program without configuring the network.
Configuration options
There are following options available:
- Probe network with BOOTP - switches automatic BOOTP probing during bootup on and off. On by default.
- Reuse manual network configs - if on, an attempt is made to restore network configuration during bootup. Netconf remembers 10 most recent manual configurations along with network cards MAC addresses. If cards MAC address matches one of the remembered ones, assigned configuration is used. On by default.
- Automatically setup PPP - switches automatic attempt to create modem connection during bootup on and off. Its made with the first config on PPP configs list. On by default.
- Reuse modem configuration - if on, modem detection is not performed during bootup - instead most recently used modem configuration is used. Off by default.
- Pulse dialing - switches dialing mode used for modem connections between tone dialing (DTMF) and pulse dialing. Default is off (that is tone dialing).
- Automount disk partitions - switches on and off automatical disk partitions mounting (ext2 and vfat filesystems) and swap partition activation during bootup. On by default.
- Add swap file if low memory - switches on and off automatical swap file creation during bootup. Swap file is created if, and only if, theres less than 16 MB memory available (including potentially activated swap partitions) and theres a disk partition on which it could be created available. On by default.
- Automount NFS /usr - switches on and off /usr filestem mounting via NFS during bootup. NFS path to the filestem must be set using "Mount /usr filesystem via NFS" command in main menu. Off by default.
Manual network card configuration
You can enter network configuration parameters in this window:
- This machines IP - enter IP number for this computer here
- Network mask - enter netmask here. If omitted, mask will be calculated based on IP (which will not necessarily be right).
- Broadcast address - enter network broadcast address here. If omitted broadcast address will be calculated based on IP (not mask! - which will not necessarily be right).
- Default gateway - enter IP address of default network gateway (router) here.
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
PPP configuration
You can enter modem connection configuration parameters in this window:
- Config name - config name (used in existing configuration selection menu).
- Phone number - phone number to dial (eg. 0w202122 for TPSA access modems).
- Username - username to send to remote server
- Password - password to send to remote server
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
Because of permanent configuration that is kept on the floppy you should remember to:
- dont write protect the floppy
- dont remove the floppy from the drive (at least during network configuration)
Enhancements:
- bugfixes in netconf reuse code
- disk partitions automounting, swap partitions autoactivating
- automatic swap file creation
- extended support for NFS mountable /usr
- PS/2 mouse support
- new startup logo
<<lessIt supports bootp for determining host IP and other network parameters (theres also manual configuration possible, but bootp is recommended).
In addition to workstations equipped with a network card (ethernet or arcnet), you can also use Pocket Linux on a PC equipped with a modem. Modem is automatically detected and then PPP connection is made.
The idea came up some time in 1996 or so. The distribution then was not perfect, but still it shown it was a great idea. It wasnt maintained for about year or so, until I took it up again in the early January 1998. After a complete rebuild Pocket Linux 2.00 was released. It soon gained a huge number of happy users, whose ideas helped its development.
The aim is to provide a small and efficient workstation that autoconfigures as much as possible and lets securely use the network from almost everywhere.
Current version is a nice attempt and future ones will enhance the automation and support for various network equipment and protocols, becoming a total solution. Future plans also include side projects like one floppy router.
In order to understand some of the config options its useful to know something about operations that are done during bootup (in order to automatically configure the network). These are, in order (the later attempts are made if the earlier ones dont set-up the network):
- attempt to setup the network using BOOTP
- attempt to reuse previous manual configuration
- modem detection
- attempt to setup modem conection
Most of the config options switches these operations on and off.
Main menu
You can choose the following network configuration commands from the main menu (only the ones that make sense in the present context are displayed):
- Options - allows setting few binary parameters controlling automatic network configuration and modem handling.
- BOOTP query - attempts to configure network (ethernet or arcnet) using BOOTP. Normally its automatically done during bootup, but this can be switched off.
- Manual configuration - allows manual setting of network configuration parameters (ethernet or arcnet).
- Detect modem - detects serial port the modem is on and its parameters (transfer rate, initialization commands).
- Dial PPP using predefined configuration - creates modem connection (PPP) using one of (up to ten) remembered configurations. By default only TPSA (0202122) configuration is remembered.
- Dial PPP using new configuration - creates new PPP configuration and sets up a modem connection using the newly created config.
- Disconnect PPP - disconnects modem connection.
- Mount /usr via NFS - mounts remote /usr filesystem via NFS. It will be automatically mounted during each Pocket Linux bootup if its turned on in configuration options.
- Exit - Do not config the network - exits the program without configuring the network.
Configuration options
There are following options available:
- Probe network with BOOTP - switches automatic BOOTP probing during bootup on and off. On by default.
- Reuse manual network configs - if on, an attempt is made to restore network configuration during bootup. Netconf remembers 10 most recent manual configurations along with network cards MAC addresses. If cards MAC address matches one of the remembered ones, assigned configuration is used. On by default.
- Automatically setup PPP - switches automatic attempt to create modem connection during bootup on and off. Its made with the first config on PPP configs list. On by default.
- Reuse modem configuration - if on, modem detection is not performed during bootup - instead most recently used modem configuration is used. Off by default.
- Pulse dialing - switches dialing mode used for modem connections between tone dialing (DTMF) and pulse dialing. Default is off (that is tone dialing).
- Automount disk partitions - switches on and off automatical disk partitions mounting (ext2 and vfat filesystems) and swap partition activation during bootup. On by default.
- Add swap file if low memory - switches on and off automatical swap file creation during bootup. Swap file is created if, and only if, theres less than 16 MB memory available (including potentially activated swap partitions) and theres a disk partition on which it could be created available. On by default.
- Automount NFS /usr - switches on and off /usr filestem mounting via NFS during bootup. NFS path to the filestem must be set using "Mount /usr filesystem via NFS" command in main menu. Off by default.
Manual network card configuration
You can enter network configuration parameters in this window:
- This machines IP - enter IP number for this computer here
- Network mask - enter netmask here. If omitted, mask will be calculated based on IP (which will not necessarily be right).
- Broadcast address - enter network broadcast address here. If omitted broadcast address will be calculated based on IP (not mask! - which will not necessarily be right).
- Default gateway - enter IP address of default network gateway (router) here.
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
PPP configuration
You can enter modem connection configuration parameters in this window:
- Config name - config name (used in existing configuration selection menu).
- Phone number - phone number to dial (eg. 0w202122 for TPSA access modems).
- Username - username to send to remote server
- Password - password to send to remote server
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
Because of permanent configuration that is kept on the floppy you should remember to:
- dont write protect the floppy
- dont remove the floppy from the drive (at least during network configuration)
Enhancements:
- bugfixes in netconf reuse code
- disk partitions automounting, swap partitions autoactivating
- automatic swap file creation
- extended support for NFS mountable /usr
- PS/2 mouse support
- new startup logo
Download (1.44MB)
Added: 2005-05-11 License: GPL (GNU General Public License) Price:
1640 downloads
2-Disk X window embedded Linux 2.0.0
2-Disk X window embedded Linux is a very efficient Linux/xwindows distribution. more>>
2-Disk X window embedded Linux is a very efficient Linux/xwindows distribution, implementing a net centric operating environment and user friendly GUI
The distribution is intended to be a demonstration of Mungkie assiciates embedded appliance development environment, showing the sort of environment that can be created for small appliance GUI systems using less than 4Mb flash and 4Mb RAM.
The embedded development environment is based around a standard source tree containing all the required utilities for a standard POSIX unix implementation with a number of XML based GUI configuration and compilation tools. Simple GUI utilities are used to configure required components and set compilation options.
The distribution is targeted as a base for:
corporate users to reduce IT costs by deploying X terminals on old or low cost hardware
Or:
embedded OS for handhelds, settop boxes, or communications devices, with full support for bluetooth, wifi, internet, and MMS protocols
Or:
Hobbyist or small companies to develop specialist applications for cheap commodity hardware
Main features:
- kernel 2.0.x/2.2.x/2.4.x
- libc-2.1/libc5/uclibc,
- tcp/ip network support. full protocol stack for wifi, mms
- busybox 0.62,
- tinylogin 1.0,
- ppp, chat, some daemons, inetd, crond. dhcp client and server. iptables
- e3 editor,
- X window system 4.1 vesa
- VNC client
- merlin character recognition
- rdesktop remote windows client
- ssh
- Mungwm : a window manager
- Mungbrowse : a web browser
- Mungterm : a terminal program
- Mungames : a collection of 12 games
- Mungedit : a text editor
- Mungfile : embedded file manager
- NEW Evil bastard operator tools
- NEW Cheese dynamics context apropriation modeling
- NEW Mini Mung beans (beans of mung for all your network environment)
Enhancements:
- Script cleanups were done to the build system.
- Bugs were fixed concerning HTTPS access with the Mweb browser.
<<lessThe distribution is intended to be a demonstration of Mungkie assiciates embedded appliance development environment, showing the sort of environment that can be created for small appliance GUI systems using less than 4Mb flash and 4Mb RAM.
The embedded development environment is based around a standard source tree containing all the required utilities for a standard POSIX unix implementation with a number of XML based GUI configuration and compilation tools. Simple GUI utilities are used to configure required components and set compilation options.
The distribution is targeted as a base for:
corporate users to reduce IT costs by deploying X terminals on old or low cost hardware
Or:
embedded OS for handhelds, settop boxes, or communications devices, with full support for bluetooth, wifi, internet, and MMS protocols
Or:
Hobbyist or small companies to develop specialist applications for cheap commodity hardware
Main features:
- kernel 2.0.x/2.2.x/2.4.x
- libc-2.1/libc5/uclibc,
- tcp/ip network support. full protocol stack for wifi, mms
- busybox 0.62,
- tinylogin 1.0,
- ppp, chat, some daemons, inetd, crond. dhcp client and server. iptables
- e3 editor,
- X window system 4.1 vesa
- VNC client
- merlin character recognition
- rdesktop remote windows client
- ssh
- Mungwm : a window manager
- Mungbrowse : a web browser
- Mungterm : a terminal program
- Mungames : a collection of 12 games
- Mungedit : a text editor
- Mungfile : embedded file manager
- NEW Evil bastard operator tools
- NEW Cheese dynamics context apropriation modeling
- NEW Mini Mung beans (beans of mung for all your network environment)
Enhancements:
- Script cleanups were done to the build system.
- Bugs were fixed concerning HTTPS access with the Mweb browser.
Download (7.2MB)
Added: 2006-05-06 License: Free To Use But Restricted Price:
1266 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above create windows 98se startup disk search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
