Free castles in germany software for linux

Castle is a server distribution from the ALT Linux Team in Russia. Installation instructions and some other documentation is available in English.

Brief RSBAC instructions:

1. During installation process you will have to create security officer account. This is a user that can setup RSBAC security configuration.
2. Installer applies to RSBAC kernel two special parameters "rsbac_auth_enable_login" and "rsbac_softmode". Please, dont remove it. You need it for correct installation process.
3. Run RSBAC kernel just after system installation.
4. After reboot RSBAC will function in normal mode. If you need soft mode again, use rsbac_softmode kernel parameter during boot.
5. After finishing system configuration please reboot your server.
6. RSBAC will work in normal mode at all future startups of the system. You can boot RSBAC kernel in "soft" mode again using "rsbac_softmode" kernel parameter.
7. Login as security officer you have created during installation process and run main RSBAC configuration utility "rsbac_admin".

Default security configuration:

* All system directories are in "read only" and "execute only" mode.
* Base system configuration files (e.g /etc/lilo.conf /etc/fstab) are also in read only mode.
* Home directory is available only for users and security officer (but he has no access to users home directories).Security Officers home is situated in the root directory (/secoff) and is open only for the owner. You can also create trusted environment for security officer by putting special files into the home.
* There are some useful scripts in security officers home: to enable/disable useradd, to enable/disable install and an example script for http protection.

FUSE can implement a fully functional filesystem in a userspace program.
Main features:
- Simple library API
- Simple installation (no need to patch or recompile the kernel)
- Secure implementation
- Userspace - kernel interface is very efficient
- Usable by non privileged users
- Runs on Linux kernels 2.4.X and 2.6.X
- Has proven very stable over time
Installation
Some projects include the whole FUSE package (for simpler installation). In other cases or just to try out the examples FUSE must be installed first. The installation is simple, after unpacking enter:
./configure
make
make install
If this produces an error, please read on.
The configure script will try to guess the location of the kernel source. In case this fails, it may be specified using the --with-kernel parameter. Building the kernel module needs a configured kernel source tree matching the running kernel. If you build your own kernel this is no problem. On the other hand if a precompiled kernel is used, the kernel headers used by the FUSE build process must first be prepared. There are two possibilities:
1. A package containing the kernel headers for the kernel binary is available in the distribution (e.g. on Debian its the kernel-headers-X.Y.Z package for kernel-image-X.Y.Z)
2. The kernel source must be prepared:
- Extract the kernel source to some directory
- Copy the running kernels config (usually found in /boot/config-X.Y.Z) to .config at the top of the source tree
- Run make menuconfig, then make dep at the top of the source tree (only needed on 2.4 kernels)
If using the 2.6 kernel, then write access is needed to some files in the kernel source tree. Usually it is enough if you make .tmp_versions and .__modpost.cmd writable.
Enhancements:
- Stacking support for the high level API
- Add filename charset conversion module
- Improved mounting

The Castle is a first-person shooter (FPS) style game in a dark fantasy setting. Your main weapon is a sword, so the fight is mostly short-range. 3 main levels included, packed with creatures, items and sounds.

Also a bonus level, from a well-known 3D game, will be available to you from "New Game" menu once you finish the main game (you can also switch to this level from the debug menu, if youre impatient).

run in xterm is an servcie menu which adds "run in xterm" & "run in xterm as root" to action menu on binary files, scripts etc.

It has 2 languages: english and polish.

Installation:

copy/save this file in
~/.kde/share/apps/konqueror/servicemenus

Skolelinux is made as free (as in speech) software, and also Skolelinux is an overall computer solution based on schools resources and needs.
- Skolelinux is a network architecture tailored for use in schools.
- Skolelinux is developed and supported by a large and growing international community.
- Skolelinux is designed to be easy and cheap to maintain.
- Skolelinux gives the students their own usernames, home directories and services.
- Skolelinux includes OpenOffice.org
Skolelinux, Debian and all auxiliary software components we use are free software ? free as in freedom. The term "free software" implies the following rights:
- Freedom to use the software regardless of purpose and adapt it to ones needs.
- Freedom to study how the software works.
- Freedom to redistribute the software so ones neighbour can benefit from it.
- Freedom to modify and enhance the software and publish those modifications so everyone benefits from them.
These rights form the foundation of both Debian, Skolelinux and all the software we use. They enable us to use the various software components, put them together in our specialized network design and package and redistribute the software as "Skolelinux".
With proprietary software, such as Microsoft Windows, all adaptions and modifications have to be redone everywhere. With Skolelinux, modifications and enhancements done by a school in Norway may benefit schools in Eritrea ? and vice versa. Windows is the most commonly used operative system used in schools today, but as Windows is proprietary software, it is not possible to tailor Windows for school usage and call it "SkoleWindows".
Skolelinux (aka debian-edu) is a Custom Debian Distribution. This means that Skolelinux is a version of the Debian GNU/Linux operating system that is customized for schools. Debian is a state-of-the-art, user-friendly operating system. The goal of our customization of Debian is to make it easy to install and maintain for schools. ? with all applications available in the students mother tongue.
Despite how easy Skolelinux is to install, asking only a handful of (non-technical) questions, it is an advanced network solution, with many pre-configured services. With ordinary, closed, proprietary software, these services have to be configured manually for every single school ? and that needs careful planning and expertise!
Amongst several pre-configured services are the following:
- Central user catalogue: One username and one password for several machines and services.
- Central storage: Regardless of which machine you use in a Skolelinux network, you have access to your files and meet an interface with your settings ? an interface you are familiar with.
- Thin client solution: The applications are run on a thin client server, which is a powerful machine. The image from those applications is drawn on a "thin client", which usually is an old and cheap machine. This enables you to use old hardware. Moreover, it eases administration, as you have one server to maintain.
- Printers may be shared and made available in the network.
- A proxy server caches files downloaded from the Internet, resulting in a faster surfing experience.
Enhancements:
- This is a community release with comprehensive support from regional and national projects in Germany, Spain, France, Greece and Norway. The Skolelinux project is now a part of Debian under the name Debian-Edu. Several other projects have made additional functionality to Skolelinux tailored for national needs. Skolelinux now supports more than 50 countries. Whats new in Skolelinux 3.0: based on Debian 4.0 "etch" and therefore compatible to LSB 3.1, using kernel 2.6.18 and KDE 3.5.5...

Ryans In/Out Board is a perl driven in/out board for small-medium size organisations that needs staff to be aware of other staff whereabouts.
(Ryans In/Out Board will work for larger organisations but it may be more cumbersome to use with larger numbers of staff).
Main features:
- Displays name,phone,status,comments and date/time for each staff member
- Staff are able to quickly change their status by either clicking on their name or calling the main script with a "name" parameter.
- Standard comments are provided (Lunch, Leave etc) but can be added to/replaced by any comment the user wishes.
- With the aid of a cron job it will also clear all staff as OUT every night, without removing any comments they have entered.
- It has a simple and clear interface and users can also search for the status of any staff member.
- The generated page can be automatically refreshed at your chosen interval and status colours are defined by you.
- It also displays staff internal phone numbers and you can use your own header and footer files.

Set photo in Kopete is a really simple service menu that just sets the current photo as your photo in Kopete, nothing more, nothing less.

It doesnt handle directories containing space yet, if someone have a workaround so that KURL dont escapes all characters that would be nice=)

Just put this file in ~/.kde/share/apps/konqueror/servicemenus or use http://www.kde-look.org/content/show.php?content=11435 to install it.

libbgrab is a framegrabber library for Linux using the v4l driver and bt/conexant analog SD video input cards.

To implement constant throughput and to avoid frame loss delays, triple buffering is used through local buffer copying in a separate grabbing thread.

The library consists of two parts that are usually used together:

1. framegrabber access (bgrab.c/bgrab.h)
2. xwindows output (xutils.c/xutils.h)

Additional routines allow for image processing:

3. Motion JPG compression (RTjpeg.c, RTjpeg.h, mmx.h)
4. MMX optimized image filters (asm/*)

Examples and Demo Programs:

Note: All demo programs are hardcoded for Tuner/NTSC input. You have to modify the code and recompile for other inputs!

+++ testgrab

See demo program "testgrab" for a quick intro on how to use libbgrab. See
source code comments for additional usage notes. The source code will
probably have to be edited to adapt for your video input - it is just a
demoprogram! Use Q to quit with the live-video window active. Use F and D
to change channels.

+++ glgrab (GLX only)

A very similar program uses OpenGL as output driver and maps the live
image as a texture on a polygon - try "glgrab" for nicely scaled,
full-screen output ... not always at full frame rates ;-). Works fine with
my Matrox G400 and Geforce2MX cards and the GLX drivers.

+++ asciigrab

Also included is a demo "asciigrab" that converts video in realtime into
ASCII CHARACTERS - just start it in a large enough terminal ... .
See source code for additional usage notes. This program has actually been
exhibited in the "net_condition" art exhibition at the ZKM, Karlsruhe,
Germany on a big projection screen http://www.zkm.de).

+++ delaygrab

A nice example of using MUCH memory, try "delaygrab" in which a few
seconds of video is beeing stored and shown according to a delay-map. If it
runs, try pressing the keys 1, 2 and 3 to switch effects. This effect will
be used in upcoming exhibitions at the ZKM, Karlsruhe, Germany with
temperature sensors. A similar program with a network interface was
developed for the world exhibition Expo2000, Hannover 2000 and can be found
in the "expograb" directory.

+++ zoomgrab (3Dfx Glide only)

Also included is a demo "zoomgrab" that shows a live video image at any
scale using a 3dfx graphics card (required). The numbers in "zoomdef.txt"
define zoom scales in ONE SECOND intervals (range: 0.01 to 200.0, first
number in line) and mixer volume settings (range: 0 to 100, second number
in line) that will be smoothly applied to the image and the volume. See
source code for additional usage notes. This program was also part of an art
exhibition at Weimar, Germany in 1999.

+++ artcam (3Dfx Glide only)

A similar demo called "artcam" also uses glide for display. This demo
changes the colors of an image in realtime using a precalculated
conversion table.

+++ webcam

And then there is the really complete and useful "webcam" application - see
the README in the /webcam directory for more explanation and usage
information of this nice little utility.

+++ greydetect

A utility program called "greydetect" makes measurements of the mean
greyscale values in rectangular areas. It can be used for scientific
measurements. See the README in the /greydetect subdirectory for more info
and usage information.

+++ difftrigger

The tool program "difftrigger" can be used as a security or interface
application to detect changes in images (i.e. from moving objects).
See the README in the /difftrigger subdirectory for more info and usage
information. Very similar is the application "tracker". Here the
difference images can be used to track the motion within a rectangular
area and send it to an external program via TCP/IP.

+++ rgbmix

Yet another art-program is the demo "rgbmix". It uses three framegrabber
inputs to get b/w images and mixes them together into a single RGB color
output image. This might make it into the lobby of a big company someday.
Any buyers ... :-)

+++ tracker

Yet another specialized tracking program is "tracker". Again this a program
that was developed for an installation and requires several other utilities
to be useful (asciireflector and reflector2midi). See the local README for
information on this tool. If you want to see it in action, check the passage
from the Frankfurt Airport Terminal to the Trainstation June-December 2000.
Diagrams of the installation and documentation are included in the /tracker
directory.

+++ rtjpegrecord
+++ rtjpegplay

A new addition to libbgrab for capturing live video is RTjpeg. This library
works only on MMX capable CPUs and provides fast motion Jpeg compression
routines. The resulting format is NOT compatible with standard MPEG or JPEG
files - i.e. one needs the RTjpeg library to decompress the generated stream.
The sample applications for recording and playback can be found in the /examples
directory. Since the input video format is YUV420 and a color conversion
would be required for standard RGB X-windows screens, no output will be shown
during the recording phase. To record use "rtjpegrecord" - experiment with the
quality settings for best results. The default setting achieves a 12:1 compression
ration at excellent image quality. To view use "rtjpegplay" on 16bit bpp screens.