Free burning software software for linux

timeclock software is an application for employees to use as a timeclock. An employee time and attendance system keeps track of when your employees sign in and out of work.

This information can then be compiled to produce the total hours worked and the amount that the employees should be paid.

Timeclock-software.nets free software product will be a simple solution to allow your employees to record their time in one central location for easy access.

J Operating System is primarily intended for programmers.
Target Users:
- Hobbiests--You used to buy computers to do programming. They didnt do much else. Windows doesnt even come with a compiler, which is ironic since Bill Gates wrote BASIC. The "J" operating system is primarily intended for programmers. Ive attempted to lower the bar, so amateurs can contribute. I hope to recreate the dynamic environment that used to exist when the Commodore 64 was around and everyone was creating odd-ball software.
- Researchers--Im sure many lab researchers still use DOS because they have to interact with hardware, which is difficult with Windows.
Main features:
- No security! You can access all ports, memory and disk blocks to your hearts content. When youre working with your own computer, security just gets in the way and makes things slow--I hate anti-virus and anti-spyware because they just slow things down. When you know you dont have a risk, have no secrets and do regular back-ups, who needs security?
- Uniformity
- There is no virtual memory and everyone is on the same address-map. You can easily communicate between tasks, passing addresses. Addresses start at a base of zero and, essentually, segment registers are not used.
- There is basically one language to learn called "C+" which is a little more than "C", but less than "C++". You dont need to learn a scripting langauge because everything uses this syntax.
- There is an extension of ASCII called "J" rich text which allows colors, links, graphics and various widgets in your documents. This format is used in source code, documents, help, menus, etc.
- Support for compressed, encrypted and contiguous files.
- FAT32, FAT12 and ISO9660 filesystems.
- Blazing-fast compiler which can recompile everything in 5 seconds. It doesnt optimize.
- All source code is included and its still around a Meg.
Hardware:
- PS/2 mouse and keyboard
- VGA graphics
- Some hard drives. Must be on the primary or secondary IDE controller and support LBA28. Drives of 120Gig are the limit.
- Some CD-ROM/DVD drives, including burning.
- Some floppies. Just 1.44Meg and not all types.
- No USB support yet
- No network support yet
- ASCII printers on the parallel port are supported.

Mount ISO Image is an advanced script which allows to perform multiple operations with ISO, NRG (Nero Burning ROM), UDF (DVD), CUE/BIN, CCD/IMG/SUB (CloneCD), XDVDFS (XBOX) images.
Mount/unmount operations can be performed in two different ways: using kdesu or sudo. During the installation youll be offered to choose a variant to use.
Note: If you prefer to use sudo, you should first choose to "Setup sudo config" in installation menu.
Usage:
ISO9660 (CD) and UDF (DVD) images
Mount:
Right-click an ".ISO" file and choose "Actions -> Manage ISO -> Mount Image". Image file will be mounted to folder on Desktop, the corresponding folder will be opened and raised.
Unmount:
Right-click an ".ISO" file and choose "Actions -> Manage ISO -> Unmount Image". The corresponding folder will be removed from the desktop automagically.
Calculate MD5 sum:
Right-click an ".ISO" file, choose "Actions -> Manage ISO -> Calculate MD5 sum" and wait for completion - it may take several minutes for a standard 650 Mb image on a slow machine.
Create ISO/UDF image from directory:
Right-click a folder that you wish an ISO or UDF image to be created from and choose "Actions -> Manage ISO -> Create ISO (or UDF) image". Image will be created either in parent directory of this folder (if user is allowed to write there) or on the Desktop.
Warning: Check if you have enough free space on target partition before creating an ISO!
Create ISO/UDF image from CD/DVD drive:
Right-click any suitable directory (resulting file will be stored there), select "Actions -> Manage ISO -> Create ISO-image from CD-ROM" and select the name of ISO image in the filename selection dialog. If it suggests you put the resulting image on the Desktop instead of the selected directory, it means that current user has no permission to write in this directory.
Note: This feature requires a working CD/DVD drive
Warning: Check if you have enough free space on target partition before creating an ISO!
NRG (Nero Burning ROM) images
Mount:
Right-click an ".NRG" file and choose "Actions -> Manage NRG -> Mount Image". Image file will be mounted to folder on Desktop, the corresponding folder will be opened and raised.
Unmount:
Right-click an ".NRG" file and choose "Actions -> Manage NRG -> Unmount Image". The corresponding folder will be removed from the desktop automagically. You can also right-click this very folder on your to unmount.
Calculate MD5 sum:
Right-click an ".NRG" file, choose "Actions -> Manage NRG -> Calculate MD5 sum" and wait for completion - it may take several minutes for a standard 650 Mb image on a slow machine.
Convert NRG image to ISO
Right-click an ".NRG" file and choose "Actions -> Manage NRG -> Convert to ISO" to convert the image to a standard ISO.
Warning: Check if you have enough free space before converting!
CUE/BIN images
Mount:
Right-click a ".CUE" file and choose "Actions -> Manage CUE/BIN -> Mount Image". Image file will be mounted to folder on Desktop, the corresponding folder will be opened and raised.
Note: This feature requires the use of cdemu utility, available here: http://cdemu.sourceforge.net
If it is not installed on your system, you will need to compile it from source or find a suitable package.
Unmount:
Right-click a ".CUE" file and choose "Actions -> Manage CUE/BIN -> Unmount Image". The corresponding folder will be removed from the desktop automagically. You can also right-click this very folder on your to unmount.
Convert CUE/BIN image to ISO:
Right-click a ".CUE" file and choose "Actions -> Manage CUE/BIN -> Convert to ISO" to convert the image to a standard ISO.
Note: This feature requires bchunk utility, available here: http://he.fi/bchunk
If it is not installed on your system, you will need to compile it from source or find a suitable package.
Warning: Check if you have enough free space before converting!
CCD/IMG/SUB (CloneCD) images
Convert CloneCD image to ISO:
Right-click a ".CCD" file and choose "Actions -> Manage CloneCD -> Convert to ISO" to convert the image to a standard ISO.
Note: This feature requires ccd2iso utility, available here: http://sourceforge.net/projects/ccd2iso
If it is not installed on your system, you will need to compile it from source or find a suitable package.
Warning: Check if you have enough free space before converting!
XDVDFS (XBOX) images
Create XDVDFS image from directory:
Right-click a folder that you wish an XDVDFS image to be created from and choose "Actions -> Manage ISO -> Create XDVDFS image". Image will be created either in parent directory of this folder (if user is allowed to write there) or on the Desktop.
Note: This feature requires extract-xiso utility, available here
Warning: Check if you have enough free space on target partition before creating an ISO!
Installation:
tar -jxf mount-iso-image-0.9.tar.bz2
cd mount-iso-image-0.9
./install.sh
Please follow installer instructions
Translations:
- Czech (by Jozef Riha)
- Danish (by Kalna and BK)
- French (by MrYouP)
- German (by Xenonite and seraphyn)
- Hungarian (by Marcel Hilzinger and Vince Pinter)
- Italian (by marcosegato)
- Polish (by Lukasz Purgal)
- Portuguese/brazilean (by Groo and Dherik)
- Romanian (by Spoiala Cristian)
- Russian (by Jinjiru)
- Slovak (by Jozef Riha)
- Spanish (by mrthc)

Lightscribe System Software and SDK provides libraries and a software development kit for Lightscribe Direct Disc Labeling of special writable DVD media.
Keep burning beautiful LightScribe discs by regularly updating your LightScribe System Software.
The LightScribe System Software is required for proper operation of your LightScribe system. Updates are released regularly to support new hardware or recently introduced LightScribe CDs and DVDs, and will ensure optimal and reliable operation of your LightScribe Labeling system.
Your LightScribe product manufacturer may have the best knowledge of your specific configuration and needs, and they are recommended as your first source of updates whenever possible.
This limited support universal version of the LightScribe System Software offered here has not been specifically tested by your hardware provider, and is provided as an alternative should you have problems with obtaining an update.
Enhancements:
- New drive and media support was added.
- Minor fixes were made.

BashBurn (Previously Magma) is a bash script designed to make CD burning at the console easier. BashBurn project supports burning normal data CDs, audio CDs, blanking CD-RWs, multisession, and more.

Installation:

1. First, download the latest version. Usually the development versions are pretty stable and should not cause any problems for you, but if you want to be on the safe side, get the latest stable version.
2. Second, unpack the downloaded tar.gz file with the command tar zxvf BashBurn-xyz.tar.gz (Where xyz is the version number). This will create a directory and unpack all files into that. Enter that directory and as root, run the install script as ./Install.sh or sh Install.sh. This will start the installation. Just answer the questions asked and in a matter of seconds the installation is done.
3. You can now delete the folder you unpacked BashBurn in, and as your regular user just type bashburn in a console and the program will start. Remember to first configure BashBurn to suit your system, and then its ready to burn away!
If you have problems or things just dont work right, dont be afraid to send me an emailand ask/complain about it.

Grab&Burn is a powerful tool for grabbing, burning and mastering of CD and DVD discs. Grab&Burn supports all types of optical storage medias (including CD-R/RW, DVD-R/RW, DVD+R/RW and DVD-RAM) as well as a wide variety of burning hardware.
With Grab&Burn you may perform ordinal grabbing, copying and burning operations as well as expert DVD Authoring and Mastering. These advanced features enable you to create valid DVD-video discs from custom video files, for example, copied from other DVDs. Moreover, with DVD Splitting Wizard you may split DVD-video discs into smaller parts and burn them to DVD writable discs or emulate with StarPort DVD Emulator and watch DVD-Video movies directly on your PC. This enables you to create copies of 9.4 GB DVDs in several clicks.
At the same time, Grab&Burn is easy to learn and to use. In addition to expert DVD authoring and DVD mastering features Grab&Burn offers a number of step-by-step wizards that introduce its functionality to the novice users.
For novice users Grab&Burn offers the Quick Start Wizard that provides them with the most frequently used operations, such as disc copying, grabbing and splitting DVDs.
Main features:
- All MMC compatible CD/DVD recorders (CD-R/W, DVD-R/W, DVD+R/W and DVD-RAM) are supported
- UDF file system mastering (UDF 1.02, 1.50 and 2.01)
- ISO9660 file system mastering (including Joliet UNICODE extensions)
- Session import (appending already created CDs/DVDs)
- Bridge file system (ISO9660/UDF for DVD-Video creation) mastering
- DVD-Video main sequence (movie itself) extraction
- Audio content processing
- Track-At-Once and Disc-At-Once (RAW) recording modes
- DVD-Video authoring code (make own movie from the set of the VOB files)
- Track-At-Once and Disc-At-Once (RAW) recording modes
- El Torito (bootable CD/DVD)
- DVD9 ? 2 DVD-R(+R) convertion

libburnia is a project comprised of libraries and binaries for reading, mastering, and writing optical discs.
libburnia is a project comprised of libraries, language bindings, and middleware binaries that emulate classic and valuable Linux tools.
The libburnias source code is distributed under the terms of the GNU General Public License.
Enhancements:
- This release is able to cope with the peculiarities of Linux 2.4 USB.
- It will refuse to perform -dummy runs on media which cannot simulate burning.
- A new option modesty_on_drive= may help with hda -> hdb burns.
- The new option minibuf= for cdrskin was introduced as an abstraction over cdrecords modesty_on_drive=.
- The option --adjust_speed_to_drive has been added.
- This release takes precautions against using the burner drive as a track source.

PCLinuxOS project is one of the worlds up and coming providers of a Linux Desktop Solution. With a small but dedicated development team, PClinuxOS delivers Desktop Ready Software that harnesses the power of the Open Source Community.
Enhancements:
- PCLinuxOS 0.93a Junior is a self booting Live CD with advanced hardware detection. In addition to running Junior in Live CD mode, you can also install it to your computer. Easy to follow instructions are included on the Live CD as well as a chat channel for instant help. Junior comes with a set of pre-selected programs for web browsing, email, instant messaging, blogging, IRC chat, music, graphics, video, digital camera, games, FTP, BitTorrent transfer, CD/DVD burning and more.