Free bin to hex decoder software for linux

MMS Decoder provides a script for sending MMS messages to a Web page.
MMS Decoder can receive MMS messages, decode them, and display them on a Web page. This is done by acting as an MMSC, which is a server to which MMS messages are sent.
The only requirement to get this to work is an internet connected webserver, with PHP support and a phone which can send MMS (some operators may have blocked all MMS servers except their own, and the application will not work with these).
When an MMS is sent, its usually sent to the operators MMSC, which notifies the reciever (by a binary encoded SMS) that she or he has an MMS to retrieve, then his or her phone connects to the MMSC server and fetches the MMS which has been made available on the server via HTTP. What my web application actually do is to pretend to be an MMSC, recieves the MMS, decodes it (its encoded as specified in the WAP-209-MMSEncapsulation-20020105-a and wap-230-wsp-20010705-a specifications) and then stores it.
The only thing you need to do to make this work on your phone, is to set the phones MMSC (may also be labeled Service Center, MMS Center, or MMS Server) to http://domain.com/mms/get.php, or something like that, and then start sending MMS messages. And best of all, it will not cost you like 20 cents which the phone operators charge, the only cost is what your operator charge for WAP access (usually a lot less than the MMS cost), since the MMS is sent over WAP.
MMS Decoder was first written as a school project, and therefore Ive written a very detailed report of the decoding mechanism. This is, how ever, written in swedish so it would not be useful to anyone who doesnt know swedish. You can grab the report here.
Enhancements:
- An installation script, which creates the database or/and the tables, was added.
- A phpMyAdmin dump of the database structure was added.
- The directory structure of the package was changed.

Audio::AMR::Decode is a Perl extension do decode .amr files.

SYNOPSIS

use Audio::AMR::Decode;
Audio::AMR::Decode::amr2raw(infile.amr, outfile.pcm);

This module will attempt to decode an amr encoded audio file to a raw pcm audio encoded file.

The package contains C-source files for the optimized fixed-point speech decoder. The optimized fixed-point speech decoder is bit-exact with 3GPP TS 26.073 fixed-point speech decoder version 4.1.0.

Convert::BinHex can extract data from Macintosh BinHex files.

ALPHA WARNING: this code is currently in its Alpha release. Things may change drastically until the interface is hammered out: if you have suggestions or objections, please speak up now!

SYNOPSIS

Simple functions:

use Convert::BinHex qw(binhex_crc macbinary_crc);

# Compute HQX7-style CRC for data, pumping in old CRC if desired:
$crc = binhex_crc($data, $crc);

# Compute the MacBinary-II-style CRC for the data:
$crc = macbinary_crc($data, $crc);

Hex to bin, low-level interface. Conversion is actually done via an object ("Convert::BinHex::Hex2Bin") which keeps internal conversion state:
# Create and use a "translator" object:
my $H2B = Convert::BinHex->hex2bin; # get a converter object
while (< STDIN >) {
print $STDOUT $H2B->next($_); # convert some more input
}
print $STDOUT $H2B->done; # no more input: finish up

Hex to bin, OO interface. The following operations must be done in the order shown!
# Read data in piecemeal:
$HQX = Convert::BinHex->open(FH=>*STDIN) || die "open: $!";
$HQX->read_header; # read header info
@data = $HQX->read_data; # read in all the data
@rsrc = $HQX->read_resource; # read in all the resource

Bin to hex, low-level interface. Conversion is actually done via an object ("Convert::BinHex::Bin2Hex") which keeps internal conversion state:
# Create and use a "translator" object:
my $B2H = Convert::BinHex->bin2hex; # get a converter object
while (< STDIN >) {
print $STDOUT $B2H->next($_); # convert some more input
}
print $STDOUT $B2H->done; # no more input: finish up

Bin to hex, file interface. Yes, you can convert to BinHex as well as from it!
# Create new, empty object:
my $HQX = Convert::BinHex->new;

# Set header attributes:
$HQX->filename("logo.gif");
$HQX->type("GIFA");
$HQX->creator("CNVS");

# Give it the data and resource forks (either can be absent):
$HQX->data(Path => "/path/to/data"); # here, data is on disk
$HQX->resource(Data => $resourcefork); # here, resource is in core

# Output as a BinHex stream, complete with leading comment:
$HQX->encode(*STDOUT);

PLANNED!!!! Bin to hex, "CAP" interface. Thanks to Ken Lunde for suggesting this.
# Create new, empty object from CAP tree:
my $HQX = Convert::BinHex->from_cap("/path/to/root/file");
$HQX->encode(*STDOUT);

BinHex is a format used by Macintosh for transporting Mac files safely through electronic mail, as short-lined, 7-bit, semi-compressed data streams. Ths module provides a means of converting those data streams back into into binary data.

Nietzsche provides an easy to learn language.

It is an interpreted language, written with an hexadecimal editor such as plexedit, hexedit and so on.

You just have to supply the filename and the number of empty characters
to be inserted.

The null character for Nietzsche is hex 00.

Using labels in this language is fundamental. SO its a good thing to take confidence with them and to use them at best.

Labels must begin and end with 5 (05) 5 (05).

gmailsender is a mono based mail sending application.
Use it to send Email through a smtp server (only without authentification) with an optional attached file.
gmailsender is under the GPL license.
Installation:
1. make
2. mono gmailsender.exe
and if you want to install it into your /usr/local/bin (as root) :
3. make install
Enhancements:
- now gmailsender use gtk-sharp2

Sybase::Xfer contains Bcp data into a Sybae table from multiple sources.

SYNOPSIS

#!/usr/bin/perl
use Sybase::Xfer;
my %switches = (-from_server=>CIA, -to_server=>NSA, -table => x-files);
my $h = Sybase::Xfer->new( %switches );
my %status = $h->xfer(-return=>"HASH");
print "xref failed. $status{last_error_msg}n" unless $status{ok};

#!/bin/ksh
sybxfer -from_server CIA -to_server NSA -table x-files
if [[ $? != 0 ]]; then print "transfer problems"; fi

This is an html edit i started building it is my first program and it is only about a week old this is just a preview.
Main features:
- Open and Save Files
- Quick Code Buttons.
- Status bar seconds as a address bar.
- Code, Split, Pre Views
- Hex Color Code Dialog Picker.
- Expander button for streaching views
- You can view your project in real time as you code it.