Free bin to hex conversion software for linux

FLAC is a lossless compression method for audio files. Using it, one is able to reduce the filesize and keep the same audio quality as a regular WAV file (CD quality).

The FLAC format is open source, and can be read without any problem by such applications as Amarok or Kaffeine.

Wav and Flac conversion contains two service menus: one to convert WAV files into FLAC, and one to convert FLAC files into WAV.

You will need the FLAC application to be installed on your system to use these service menus.

Iris is a video conversion utility in C++ that works as a front-end to mencoder. Iris Video Conversion Utility can run in command-line or graphical modes and currently supports conversion to DVD MPEG, DivX AVI and VCD MPEG
This software intends to ease video conversion to common formats.
Help Wanted / TODO
- Cancel button does not always work
- More output formats
- Reset values for command-line format paramater
- re-work stderr redirection
- catch and identify mencoder conditions

Convert::BinHex can extract data from Macintosh BinHex files.

ALPHA WARNING: this code is currently in its Alpha release. Things may change drastically until the interface is hammered out: if you have suggestions or objections, please speak up now!

SYNOPSIS

Simple functions:

use Convert::BinHex qw(binhex_crc macbinary_crc);

# Compute HQX7-style CRC for data, pumping in old CRC if desired:
$crc = binhex_crc($data, $crc);

# Compute the MacBinary-II-style CRC for the data:
$crc = macbinary_crc($data, $crc);

Hex to bin, low-level interface. Conversion is actually done via an object ("Convert::BinHex::Hex2Bin") which keeps internal conversion state:
# Create and use a "translator" object:
my $H2B = Convert::BinHex->hex2bin; # get a converter object
while (< STDIN >) {
print $STDOUT $H2B->next($_); # convert some more input
}
print $STDOUT $H2B->done; # no more input: finish up

Hex to bin, OO interface. The following operations must be done in the order shown!
# Read data in piecemeal:
$HQX = Convert::BinHex->open(FH=>*STDIN) || die "open: $!";
$HQX->read_header; # read header info
@data = $HQX->read_data; # read in all the data
@rsrc = $HQX->read_resource; # read in all the resource

Bin to hex, low-level interface. Conversion is actually done via an object ("Convert::BinHex::Bin2Hex") which keeps internal conversion state:
# Create and use a "translator" object:
my $B2H = Convert::BinHex->bin2hex; # get a converter object
while (< STDIN >) {
print $STDOUT $B2H->next($_); # convert some more input
}
print $STDOUT $B2H->done; # no more input: finish up

Bin to hex, file interface. Yes, you can convert to BinHex as well as from it!
# Create new, empty object:
my $HQX = Convert::BinHex->new;

# Set header attributes:
$HQX->filename("logo.gif");
$HQX->type("GIFA");
$HQX->creator("CNVS");

# Give it the data and resource forks (either can be absent):
$HQX->data(Path => "/path/to/data"); # here, data is on disk
$HQX->resource(Data => $resourcefork); # here, resource is in core

# Output as a BinHex stream, complete with leading comment:
$HQX->encode(*STDOUT);

PLANNED!!!! Bin to hex, "CAP" interface. Thanks to Ken Lunde for suggesting this.
# Create new, empty object from CAP tree:
my $HQX = Convert::BinHex->from_cap("/path/to/root/file");
$HQX->encode(*STDOUT);

BinHex is a format used by Macintosh for transporting Mac files safely through electronic mail, as short-lined, 7-bit, semi-compressed data streams. Ths module provides a means of converting those data streams back into into binary data.

Convert::MIL1750A is a Perl module for conversion routines between decimal floating/integer values and hexadecimal values in the MIL-STD-1750A format.

SYNOPSIS

use MIL1750A;

# Convert to MIL-STD-1750A hex from decimal
$hex16i = I16_to_1750A( $dec_value );
$hex16f = F16_to_1750A( $dec_value );
$hex32f = F32_to_1750A( $dec_value );
$hex48f = F48_to_1750A( $dec_value );

# Convert MIL-STD-1750A hex to decimal
$dec_value = M1750A_to_16int( $hex16i );
$dec_value = M1750A_to_16flt( $hex16f );
$dec_value = M1750A_to_32flt( $hex32f );
$dec_value = M1750A_to_48flt( $hex48f );
or ...
use MIL1750A qw( i16_to_mil f16_to_mil f32_to_mil f48_to_mil
mil_to_32f mil_to_48f mil_to_16f mil_to_16i );

# Convert to MIL-STD-1750A hex from decimal
$hex16i = i16_to_mil( $dec_value );
$hex16f = f16_to_mil( $dec_value );
$hex32f = f32_to_mil( $dec_value );
$hex48f = f48_to_mil( $dec_value );

# Convert MIL-STD-1750A hex to decimal
$dec_value = mil_to_16i( $hex16i );
$dec_value = mil_to_16f( $hex16f );
$dec_value = mil_to_32f( $hex32f );
$dec_value = mil_to_48f( $hex48f );

Convert::MIL1750A features routines to convert between 16I/16F/32F/48F decimal values and their equivalent in MIL-STD-1750A hexadecimal. The 1750A standard describes a microprocessor that is used as the backbone of many modern and legacy avionics systems. The 1750A stores data as an 8-bit exponent and n-bit mantissa (where n is the number of bits remaining in the value).

It is important to treat 16-bit values as 16-bit, 32-bit as 32-bit and 48-bit as 48-bit. Crossing bit structures will create unexpected results as 1750A hex values are structured differently, depending on their size. Additionally, the 16F format is not a formal member of the 1750A standard; it is used, however, in certain applications and is provided for reference. The 1750A standard allows positive and negative values using the 2s complement arrangement.

This module is extremely useful for ingesting data output by or for a 1750A flight processor. I would like to thank and acknowledge Dave Niklewski for helping me to find the standard documentation.Convert::MIL1750A is a Perl module for conversion routines between decimal floating/integer values and hexadecimal values in the MIL-STD-1750A format.

BootRoot creates a boot disk with lilo, a kernel and an initrd image. The initrd script mounts another root disk with a compressed (gzip or bzip2) filesystem.

The root filesystem isnt made by this program, but there lots of compressed filesytems out there to use.

You can use a bzip2 compressed filesystem, this program is easy to use, and it provides a framework showing a simple initrd method which you can freely modify.

The four steps to making a Boot Root set.

1). Grab the Perl Script right here .. boot_root give it a name .. umm .. boot_root.

2). Make sure the bang line points to the right place:

$ which perl
/usr/bin/perl
$ grep "perl -w" boot_root
#!/usr/bin/perl -w

3). Make it executable:

$ chmod 755 boot_root

4). Put it in one of your LIB PATHS:

$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin:.:
$ mv boot_root /usr/bin

5). Run it, and have lots of fun! More directions can be found at the beginning of the script.

HTML::WikiConverter::Oddmuse is a Perl module that can convert HTML to Oddmuse markup.

SYNOPSIS

use HTML::WikiConverter;
my $wc = new HTML::WikiConverter( dialect => Oddmuse );
print $wc->html2wiki( $html );

This module contains rules for converting HTML into Oddmuse markup. This dialect module supports most of Oddmuses text formatting rules described at [1], notably:

* bold, strong, italic, emphasized, and underlined text
* paragraph blocks
* external images
* internal and external links
* unordered and ordered lists
* tables [2]

[1] http://www.oddmuse.org/cgi-bin/wiki/Text_Formatting_Rules
[2] http://www.oddmuse.org/cgi-bin/wiki/Table_Markup_Extension

gmailsender is a mono based mail sending application.
Use it to send Email through a smtp server (only without authentification) with an optional attached file.
gmailsender is under the GPL license.
Installation:
1. make
2. mono gmailsender.exe
and if you want to install it into your /usr/local/bin (as root) :
3. make install
Enhancements:
- now gmailsender use gtk-sharp2

contextFS for Amarok was inspired by the work of amarokFS, here is a script to show the contextbrowser in the fullscreen mode.

Same dependencies as amarokFS.

It can also be run by the amarokFS script. Just change the path to /usr/local/bin/contextFS after install.