big book of amiga hardware
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 1911
Flock of Birds Library 1.0.2
Flock of Birds Library (libfob) provides an interface to the Flock of Birds hardware. more>>
Flock of Birds Library (libfob) provides an interface to the Flock of Birds hardware. Tedious and error prone tasks such as configuring the flocks data mode, sending commands to the flock, and decoding the data received from the flock are all hidden behind libfobs interface.
Programming the flock hardware can be hard. The programmer has to worry about in which format the flock returns data (pos/quat, quat, mat, pos, angles, pos/angles, etc.) Configuring the flock is error prone and hard to get correct. For older version of the Flock of Birds hardware, simply starting the flock can be a chore.
In contrast, libfob has been designed to be easy to use. The programmer simply tells the library the following:
- Serial port the flock is attached to (ex: "/dev/ttyS0").
- Hemisphere the flock should operate in (ex: "DOWN").
- Maximum speed the flock can operate ("FAST" for newer flock hardware "SLOW" for older hardware).
The programmer can then configure the flock on a per bird basis. Any combination of the following information can be retrieved from a bird in the flock:
- Position
- Orientation
- Buttons
At any time, the programmer can retrieve the above information in any of the following formats:
- Quaternion (represents orientation)
- Vector (represent position)
- 4x4 Matrix (represents position/orientation)
The programmer pays no penalty for retrieving data in one format over another. Internally libfob configures the flocks hardware to send data as fast as possible. libfob maintains multiple representations of the data for fast retrieval by the programmer.
libfob also provides facilities to correct orientation information for incorrectly installed bird sensors.
<<lessProgramming the flock hardware can be hard. The programmer has to worry about in which format the flock returns data (pos/quat, quat, mat, pos, angles, pos/angles, etc.) Configuring the flock is error prone and hard to get correct. For older version of the Flock of Birds hardware, simply starting the flock can be a chore.
In contrast, libfob has been designed to be easy to use. The programmer simply tells the library the following:
- Serial port the flock is attached to (ex: "/dev/ttyS0").
- Hemisphere the flock should operate in (ex: "DOWN").
- Maximum speed the flock can operate ("FAST" for newer flock hardware "SLOW" for older hardware).
The programmer can then configure the flock on a per bird basis. Any combination of the following information can be retrieved from a bird in the flock:
- Position
- Orientation
- Buttons
At any time, the programmer can retrieve the above information in any of the following formats:
- Quaternion (represents orientation)
- Vector (represent position)
- 4x4 Matrix (represents position/orientation)
The programmer pays no penalty for retrieving data in one format over another. Internally libfob configures the flocks hardware to send data as fast as possible. libfob maintains multiple representations of the data for fast retrieval by the programmer.
libfob also provides facilities to correct orientation information for incorrectly installed bird sensors.
Download (0.25MB)
Added: 2006-08-22 License: LGPL (GNU Lesser General Public License) Price:
1163 downloads
X Hardware Monitor 1.0
X Hardware Monitor is monitor hardware indicators for temperature, voltage etc... of a running system with a graphical panel. more>>
X Hardware Monitor is a hardware monitor that shows indicators for temperature, voltage, fan speed etc, of a running system with a graphical panel.
The default configuration allows to monitor up to 3 temperatures, 3 fan speeds and 6 voltages. This tool is more particularly adequate for bi-processor systems.
<<lessThe default configuration allows to monitor up to 3 temperatures, 3 fan speeds and 6 voltages. This tool is more particularly adequate for bi-processor systems.
Download (0.015MB)
Added: 2005-09-22 License: Freeware Price:
1496 downloads
My Address Book contacts manager 0.9.5
My Address Book is a web-based address book designed to help you keep a record of your friends addresses. more>>
My Address Book is a web-based address book designed to help you keep a record of your friends addresses, providing a list of your contacts (which may be filtered), categories, details of a particular contact, export and import of data (e.g. from spreadsheets), and a Christmas card list.
To use My Address Book you need to have access to some web space that allows you to use PHP and MySQL. If you want your address book to be private (which is highly recommended!) you will need to set it up inside a password-protected directory in your web space.
Installation:
If you want to use My Address Book over the Internet so you can access your addresses wherever you are, you will need some web space which allows you to use PHP and MySQL. If you only want to use My Address Book on a single computer, you will need a web server (e.g. Apache) which supports PHP and you will need MySQL.
Enhancements:
- The dates of birth of contacts may now be stored.
<<lessTo use My Address Book you need to have access to some web space that allows you to use PHP and MySQL. If you want your address book to be private (which is highly recommended!) you will need to set it up inside a password-protected directory in your web space.
Installation:
If you want to use My Address Book over the Internet so you can access your addresses wherever you are, you will need some web space which allows you to use PHP and MySQL. If you only want to use My Address Book on a single computer, you will need a web server (e.g. Apache) which supports PHP and you will need MySQL.
Enhancements:
- The dates of birth of contacts may now be stored.
Download (0.093MB)
Added: 2006-02-21 License: GPL (GNU General Public License) Price:
1340 downloads
Big Sam 2.2.6
Slash is a database-driven portal system that uses Apache/mod_perl and MySQL. more>>
Slash is a database-driven portal system that uses Apache/mod_perl and MySQL.
As you may know, Slash development for the past several years has all been in CVS, with no tarball releases. We may do a tarball at some point, but for now, we recommend installing the most recent R_ tagged code from CVS.
We tag the code with T_ for our own use (on Slashdot, slashcode.com and use.perl.org) and when we feel one of those weekly test builds is stable enough, we also slap an R_ tag on it. A complete list of tags can always be found on sourceforge.net (in the "Show files using tag" menu).
If you are running a site on a very old version of Slash pre-2.2.6, we recommend that you upgrade to 2.2.6. We recommend you research whether you want to do that.
On the other hand, if you have not already invested a lot of time into a Slash site, we strongly recommend that you begin with the most recent R_ tag.
Today we made a new R_ tag, our version of Slash from January 11, 2006: R_2_5_0_94. This is the most recent since R_2_5_0_74, which dates from June 2005.
The biggest change is CSS, which was implemented just a few weeks after _74. Other changes include reskeys (which largely replace formkeys), and public logtokens (which improve security).
So the current recommended process to build Slash is:
cvs -d:pserver:anonymous@slashcode.cvs.sourceforge.net:/cvsroot/slashcode login
(password is blank)
cvs -d:pserver:anonymous@slashcode.cvs.sourceforge.net:/cvsroot/slashcode co -P -r R_2_5_0_94 slash
In the slash directory created, read the INSTALL file (the entire file, especially REQUIREMENTS). Then, if you still want to install Slash, follow the instructions in that file carefully!
<<lessAs you may know, Slash development for the past several years has all been in CVS, with no tarball releases. We may do a tarball at some point, but for now, we recommend installing the most recent R_ tagged code from CVS.
We tag the code with T_ for our own use (on Slashdot, slashcode.com and use.perl.org) and when we feel one of those weekly test builds is stable enough, we also slap an R_ tag on it. A complete list of tags can always be found on sourceforge.net (in the "Show files using tag" menu).
If you are running a site on a very old version of Slash pre-2.2.6, we recommend that you upgrade to 2.2.6. We recommend you research whether you want to do that.
On the other hand, if you have not already invested a lot of time into a Slash site, we strongly recommend that you begin with the most recent R_ tag.
Today we made a new R_ tag, our version of Slash from January 11, 2006: R_2_5_0_94. This is the most recent since R_2_5_0_74, which dates from June 2005.
The biggest change is CSS, which was implemented just a few weeks after _74. Other changes include reskeys (which largely replace formkeys), and public logtokens (which improve security).
So the current recommended process to build Slash is:
cvs -d:pserver:anonymous@slashcode.cvs.sourceforge.net:/cvsroot/slashcode login
(password is blank)
cvs -d:pserver:anonymous@slashcode.cvs.sourceforge.net:/cvsroot/slashcode co -P -r R_2_5_0_94 slash
In the slash directory created, read the INSTALL file (the entire file, especially REQUIREMENTS). Then, if you still want to install Slash, follow the instructions in that file carefully!
Download (0.57MB)
Added: 2006-06-27 License: GPL (GNU General Public License) Price:
1217 downloads
AmigaSHELL 2.3
AmigaSHELL is a linux shell replacement. more>>
AmigaSHELL makes your boring gray on black colored bash shell revive like in the old days. Just like on Amiga(tm), blue, white, orange, black at its finest. With a nice informational bar at the top.
Installation
(be root)
make install
amigashell start
cd /etc/rc2.d
ln -s ../init.d/amigashell S99amigashell
Enhancements:
- cursors for xfree86 4.3
- left_ptr, right_ptr, busy
- added theme for wmpinboard as well
<<lessInstallation
(be root)
make install
amigashell start
cd /etc/rc2.d
ln -s ../init.d/amigashell S99amigashell
Enhancements:
- cursors for xfree86 4.3
- left_ptr, right_ptr, busy
- added theme for wmpinboard as well
Download (0.02MB)
Added: 2005-04-04 License: GPL (GNU General Public License) Price:
1665 downloads
Hardware Monitor 1.4
Hardware Monitor is a multi-purpose, beautiful system-monitoring applet. more>>
Hardware Monitor is a multi-purpose, beautiful system-monitoring applet.
The Hardware Monitor applet is an applet for the GNOME panel which tries to be a beautiful all-around solution to system monitoring. It also strives to be user-friendly and generally nice and sensible, integrating pleasantly with the rest of your GNOME desktop.
Includes different viewers, including a flame effect, allows multiple devices to be monitored in the samme applet, uses smooth updating, polished graphs, clean HIG-compliant interface.
Main features:
- A graphical view where each monitor is represented by a (time, measurement) colored curve
- A bar-plot view with a horizontal bar per monitor
- A column view with a column (time, measurement) diagram for each monitor
- A textual view which simply lists the monitors and the currently measured values
- A flame view which produces spiffy flames, the sizes of which are determined by the values of the monitored device
And the applet supports monitoring the following hardware characteristics:
- CPU usage (all CPUs, or one at the time) - niced background processes such as SETI@home are automatically ignored
- Memory usage - cache and buffers are automatically ignored
- Swap usage
- Load average
- Disk usage (or disk space free)
- Network throughput (Ethernet, wireless, modem, serial link), either incoming or outgoing or both
- Temperatures from internal sensors (e.g. system board and CPU temperatures)
- Fan speeds from internal sensors
<<lessThe Hardware Monitor applet is an applet for the GNOME panel which tries to be a beautiful all-around solution to system monitoring. It also strives to be user-friendly and generally nice and sensible, integrating pleasantly with the rest of your GNOME desktop.
Includes different viewers, including a flame effect, allows multiple devices to be monitored in the samme applet, uses smooth updating, polished graphs, clean HIG-compliant interface.
Main features:
- A graphical view where each monitor is represented by a (time, measurement) colored curve
- A bar-plot view with a horizontal bar per monitor
- A column view with a column (time, measurement) diagram for each monitor
- A textual view which simply lists the monitors and the currently measured values
- A flame view which produces spiffy flames, the sizes of which are determined by the values of the monitored device
And the applet supports monitoring the following hardware characteristics:
- CPU usage (all CPUs, or one at the time) - niced background processes such as SETI@home are automatically ignored
- Memory usage - cache and buffers are automatically ignored
- Swap usage
- Load average
- Disk usage (or disk space free)
- Network throughput (Ethernet, wireless, modem, serial link), either incoming or outgoing or both
- Temperatures from internal sensors (e.g. system board and CPU temperatures)
- Fan speeds from internal sensors
Download (0.29MB)
Added: 2007-01-13 License: GPL (GNU General Public License) Price:
1037 downloads
Address Book Continued 1.0
Address Book Continued provides a multi-user AJAX address book Web application. more>>
Address Book Continued provides a multi-user AJAX address book Web application.
It also makes use of AJAX, which means that page reloads only happen on login/logout; the rest of the operations is handled asynchronously in the background. Its well usable, even over slow connections.
You can even install ABC on your desktop PC and configure it so that it doesnt require login for connections coming from the local computer.
<<lessIt also makes use of AJAX, which means that page reloads only happen on login/logout; the rest of the operations is handled asynchronously in the background. Its well usable, even over slow connections.
You can even install ABC on your desktop PC and configure it so that it doesnt require login for connections coming from the local computer.
Download (0.021MB)
Added: 2007-02-06 License: GPL (GNU General Public License) Price:
990 downloads
SDL for AmigaOS 4.0 1.2.11
SDL for AmigaOS 4.0 project is a port of SDL, the Simple Directmedia Layer, for AmigaOS 4.0. more>>
SDL for AmigaOS 4.0 project is a port of SDL, the Simple Directmedia Layer, for AmigaOS 4.0 SDL is a popular open-source API for games and other software that need low-level access to video and audio hardware and input devices.
SDL was created and is maintained by Sam Lantinga, but has had a legion of contributors of the years (see SDL credits). The AmigaOS 4.0 port was created originally by Thomas and Hans Joerg Frieden, but for the last two years has largely been the work of me, Richard Drummond.
Other contributors include Juergen Schober (who developed the audio layer). You can find may OS4.0 applications built with SDL at os4depot.net and some that I have built on my Amiga Stuff page.
<<lessSDL was created and is maintained by Sam Lantinga, but has had a legion of contributors of the years (see SDL credits). The AmigaOS 4.0 port was created originally by Thomas and Hans Joerg Frieden, but for the last two years has largely been the work of me, Richard Drummond.
Other contributors include Juergen Schober (who developed the audio layer). You can find may OS4.0 applications built with SDL at os4depot.net and some that I have built on my Amiga Stuff page.
Download (2.7MB)
Added: 2007-03-14 License: GPL (GNU General Public License) Price:
960 downloads
Distributed Hardware Evolution Project
Distributed Hardware Evolution Project is populations of circuits evolving in a distributed online genetic algorithm. more>>
The Distributed Hardware Evolution Project allows the distribution of a genetic algorithm evolving hardware designs across the Internet by setting up an island on each clients PC which will evolve during idle time. Individuals from these islands will migrate between each other as they compete for survival.
All source code is available at Sourceforge under the projects named JaGa, DistrIT, and IslandEv. The source code is generalizable to any genetic algorithm or distributed processing task.
<<lessAll source code is available at Sourceforge under the projects named JaGa, DistrIT, and IslandEv. The source code is generalizable to any genetic algorithm or distributed processing task.
Download (0.006MB)
Added: 2005-04-01 License: GPL (GNU General Public License) Price:
1670 downloads
PHP Big Brother Hosts Configurator 0.3
PHP Big Brother Hosts Configurator is a collection of PHP scripts to configure hosts for the Big Brother network. more>>
PHP Big Brother Hosts Configurator (phpBBHC) is a collection of PHP scripts and one C program to configure hosts
for the Big Brother network monitoring software. It doesnt cover all the possible settings for Big Brothers hosts file but it should be enough for
most demands.
Ammendment: Big Brother has been pretty much replaced by Hobbit. I havent got around to using Hobbit yet but Ive heard its pretty backwards compatible with Big Brothers configuration and scripts. Ive heard of successful stories
of phpBBHC being used to configure Hobbit.
<<lessfor the Big Brother network monitoring software. It doesnt cover all the possible settings for Big Brothers hosts file but it should be enough for
most demands.
Ammendment: Big Brother has been pretty much replaced by Hobbit. I havent got around to using Hobbit yet but Ive heard its pretty backwards compatible with Big Brothers configuration and scripts. Ive heard of successful stories
of phpBBHC being used to configure Hobbit.
Download (0.011MB)
Added: 2007-02-22 License: Freely Distributable Price:
975 downloads
AJAX Book Reader 1.00
AJAX Book Reader is a complete AJAX client-server application. more>>
AJAX Book Reader is a complete AJAX client-server application that may be used with a Web browser to display a sequence of text files one page at a time.
The display style is completely controlled by a configuration file. The first application of this is as a book viewer where each chapter resides in a seperate text file.
AJAX Book Reader application is also suitable for any case where it is not practical to show all of the text to be displayed at once in the browser window.
It is assumed there is a directory that contains text files named [book][chapter]#.[ext]
and directory has been assigned to the $shelf variable in .pt-config
and [book] is 1 to N characters to identify a collection of chapters
and [chapter] is the chapter seperator (default=c)
and # is the 0 based chapter number
and [ext] is the extension of the text files (default=.txt)
and each file contains one chapter of text
and there is optionally a chapter index file [book].lis
in the shelf directory where the first line is the title of the book
and the second line is the authors name
and subsequent lines are the chapter names
It is further assumed that read.php contains the div tags < div > with an id of title, where the books title will be placed author, where the authors name will be placed navbar, where the page/chapter navigation controls will be placed page, where the text of the page will be placed
.pt-config should be changed to suit your preferences but there is nothing else especially designed to be user configurable in the other files
<<lessThe display style is completely controlled by a configuration file. The first application of this is as a book viewer where each chapter resides in a seperate text file.
AJAX Book Reader application is also suitable for any case where it is not practical to show all of the text to be displayed at once in the browser window.
It is assumed there is a directory that contains text files named [book][chapter]#.[ext]
and directory has been assigned to the $shelf variable in .pt-config
and [book] is 1 to N characters to identify a collection of chapters
and [chapter] is the chapter seperator (default=c)
and # is the 0 based chapter number
and [ext] is the extension of the text files (default=.txt)
and each file contains one chapter of text
and there is optionally a chapter index file [book].lis
in the shelf directory where the first line is the title of the book
and the second line is the authors name
and subsequent lines are the chapter names
It is further assumed that read.php contains the div tags < div > with an id of title, where the books title will be placed author, where the authors name will be placed navbar, where the page/chapter navigation controls will be placed page, where the text of the page will be placed
.pt-config should be changed to suit your preferences but there is nothing else especially designed to be user configurable in the other files
Download (0.004MB)
Added: 2006-01-27 License: GPL (GNU General Public License) Price:
778 downloads
Hardware 4 Linux 0.9.3
Hardware 4 Linux project contains a set of tools to report Linux-compatible hardware to hardware4linux.info. more>>
Hardware 4 Linux project contains a set of tools to report Linux-compatible hardware to hardware4linux.info.
Enhancements:
- This release anonymizes dmidecode output, collects OS version files instead of calling osinfo, collects audio codec files, adds a README, and collects PCI modules.
<<lessEnhancements:
- This release anonymizes dmidecode output, collects OS version files instead of calling osinfo, collects audio codec files, adds a README, and collects PCI modules.
Download (MB)
Added: 2007-08-11 License: GPL (GNU General Public License) Price:
494 downloads
Hardware::iButton 0.03
Hardware::iButton is a Perl module that allows to talk to DalSemi iButtons via a DS2480 serial widget. more>>
Hardware::iButton is a Perl module that allows to talk to DalSemi iButtons via a DS2480 serial widget.
SYNOPSIS
use Hardware::iButton::Connection;
$c = new Hardware::iButton::Connection "/dev/ttyS0";
@b = $c->scan();
foreach $b (@b) {
print "family: ",$b->family(), "serial number: ", $b->serial(),"n";
print "id: ",$b->id(),"n"; # id = family . serial . crc
print "reg0: ",$b->readreg(0),"n";
}
This module talks to iButtons via the "active" serial interface (anything using the DS2480, including the DS1411k and the DS 9097U). It builds up a list of devices available, lets you read and write their registers, etc.
The connection object is an Hardware::iButton::Connection. The main user-visible purpose of it is to provide a list of Hardware::iButton::Device objects. These can be subclassed once their family codes are known to provide specialized methods unique to the capabilities of that device. Those devices will then be Hardware::iButton::Device::DS1920, etc.
iButtons and solder-mount Touch Memory devices are each identified with a unique 64-bit number. This is broken up into 8 bits of a "family code", which specifies the part number (and consequently the capabilities), then 48 bits of device ID (which Dallas insures is globally unique), then 8 bits of CRC. When you pass these IDs to and from this package, use hex strings like "0123456789ab".
<<lessSYNOPSIS
use Hardware::iButton::Connection;
$c = new Hardware::iButton::Connection "/dev/ttyS0";
@b = $c->scan();
foreach $b (@b) {
print "family: ",$b->family(), "serial number: ", $b->serial(),"n";
print "id: ",$b->id(),"n"; # id = family . serial . crc
print "reg0: ",$b->readreg(0),"n";
}
This module talks to iButtons via the "active" serial interface (anything using the DS2480, including the DS1411k and the DS 9097U). It builds up a list of devices available, lets you read and write their registers, etc.
The connection object is an Hardware::iButton::Connection. The main user-visible purpose of it is to provide a list of Hardware::iButton::Device objects. These can be subclassed once their family codes are known to provide specialized methods unique to the capabilities of that device. Those devices will then be Hardware::iButton::Device::DS1920, etc.
iButtons and solder-mount Touch Memory devices are each identified with a unique 64-bit number. This is broken up into 8 bits of a "family code", which specifies the part number (and consequently the capabilities), then 48 bits of device ID (which Dallas insures is globally unique), then 8 bits of CRC. When you pass these IDs to and from this package, use hex strings like "0123456789ab".
Download (0.021MB)
Added: 2007-08-15 License: Perl Artistic License Price:
808 downloads
Unix Amiga Delitracker Emulator 2.07
Unix Amiga Delitracker Emulator (UADE) plays most Amiga music file formats by simulating Amiga hardware and software. more>>
Unix Amiga Delitracker Emulator (UADE) plays most Amiga music file formats by simulating Amiga hardware and software.
Unix Amiga Delitracker Emulator plays over 180 Amiga music file formats and has three frontends for playing: a command line tool, an XMMS plugin, and a Beep Media Player frontend.
Enhancements:
- An improved version of the Special FX replayer was added.
- A new Special FX ST replayer was added.
- Bugs in song length database handling were fixed.
- Audacious 1.3 is supported.
- 15 instrument soundtracker module detection is supported.
<<lessUnix Amiga Delitracker Emulator plays over 180 Amiga music file formats and has three frontends for playing: a command line tool, an XMMS plugin, and a Beep Media Player frontend.
Enhancements:
- An improved version of the Special FX replayer was added.
- A new Special FX ST replayer was added.
- Bugs in song length database handling were fixed.
- Audacious 1.3 is supported.
- 15 instrument soundtracker module detection is supported.
Download (0.74MB)
Added: 2007-05-01 License: GPL (GNU General Public License) Price:
918 downloads
Sticker Book 0.1.5
Sticker Book is a project which allows you to place stickers on a background scene. more>>
Sticker Book is a project which allows you to place stickers on a background scene.
Sticker Book is a childrens program which lets you place stickers on a background scene.
You can resize, recolour and reorient the stickers that you use, and you never run out. You can even paint with them.
The program is intended for the 3-7 year olds, but its even fun for adults.
It is flexible enough to make sophisticated pictures without being as complex as drawing/painting program.
<<lessSticker Book is a childrens program which lets you place stickers on a background scene.
You can resize, recolour and reorient the stickers that you use, and you never run out. You can even paint with them.
The program is intended for the 3-7 year olds, but its even fun for adults.
It is flexible enough to make sophisticated pictures without being as complex as drawing/painting program.
Download (1.2MB)
Added: 2006-11-22 License: GPL (GNU General Public License) Price:
1584 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above big book of amiga hardware search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
