pearpc 0.4
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 945
PearPC 0.4
PearPC is an architecture-independent PowerPC platform emulator capable of running most PowerPC operating systems. more>>
PearPC is an architecture-independent PowerPC platform emulator capable of running most PowerPC operating systems.
This release fixes an ugly partition mapping bug which prevented PearPC to boot OpenDarwin. But the fix might cause regressions: so if your image is no longer booting and you can compile pearpc yourself, please talk to the pearpc-devel mailing list.
Installation:
-Get the Mandrake Installations CDs from a near mirror.
-Read the getting started document first.
-Join the club.
-Make sure you have configured with a big harddisk (3 GiB should do) and a CDROM with the Mandrake 9.1 PPC CD1 inserted. Select a 15 bit video mode. (ppc_start_resolution to 1, 4 or 7)
-Boot and you should get the yaboot menu.
-Press enter and wait.
-At some point, a graphical installer will show up.
-I wont partition your disk for you so you have to do it on your own
create 2 partitions: Apple bootstrap and a Linux onecontinue install.
It will ask you to insert another CD. Click "Change CD" and choose a different .iso or simply insert a different CD. Continue.
-Something bad may happen in the end of the install. Nevermind.
While the CPU emulation may be slow (1/500th or 1/15th, see above), the speed of emulated hardware is hardly impacted by the emulation; the emulated hard-drive and CDROM e.g. are very fast, especially with OS that support bus-mastering (Linux, Darwin, Mac OS X do).
Because the author has only access to a little-endian machine, PearPC will most likely only run on little-endian architectures. This shouldnt be hard to fix and the author would fix this himself if he such hardware. (You can donate some big-endian hardware to get this fixed!)
Equally, PearPC will probably only run on 32-bit architectures. This shouldnt be hard to fix either. (You can donate...)
A lot of unimplementated features are fatal (i.e. will abort PearPC).
Timings are very still a little bit inaccurate. Dont rely on benchmarks made in the client.
PearPC lacks a save/restore machine-state feature.
No Altivec support yet but being worked on.
No LBA48 (but LBA). Currently no support for hard disks greater than 128 GiB. Disks > 4GiB are not tested very well.
<<lessThis release fixes an ugly partition mapping bug which prevented PearPC to boot OpenDarwin. But the fix might cause regressions: so if your image is no longer booting and you can compile pearpc yourself, please talk to the pearpc-devel mailing list.
Installation:
-Get the Mandrake Installations CDs from a near mirror.
-Read the getting started document first.
-Join the club.
-Make sure you have configured with a big harddisk (3 GiB should do) and a CDROM with the Mandrake 9.1 PPC CD1 inserted. Select a 15 bit video mode. (ppc_start_resolution to 1, 4 or 7)
-Boot and you should get the yaboot menu.
-Press enter and wait.
-At some point, a graphical installer will show up.
-I wont partition your disk for you so you have to do it on your own
create 2 partitions: Apple bootstrap and a Linux onecontinue install.
It will ask you to insert another CD. Click "Change CD" and choose a different .iso or simply insert a different CD. Continue.
-Something bad may happen in the end of the install. Nevermind.
While the CPU emulation may be slow (1/500th or 1/15th, see above), the speed of emulated hardware is hardly impacted by the emulation; the emulated hard-drive and CDROM e.g. are very fast, especially with OS that support bus-mastering (Linux, Darwin, Mac OS X do).
Because the author has only access to a little-endian machine, PearPC will most likely only run on little-endian architectures. This shouldnt be hard to fix and the author would fix this himself if he such hardware. (You can donate some big-endian hardware to get this fixed!)
Equally, PearPC will probably only run on 32-bit architectures. This shouldnt be hard to fix either. (You can donate...)
A lot of unimplementated features are fatal (i.e. will abort PearPC).
Timings are very still a little bit inaccurate. Dont rely on benchmarks made in the client.
PearPC lacks a save/restore machine-state feature.
No Altivec support yet but being worked on.
No LBA48 (but LBA). Currently no support for hard disks greater than 128 GiB. Disks > 4GiB are not tested very well.
Download (0.88MB)
Added: 2005-12-21 License: GPL (GNU General Public License) Price:
920 downloads
allbib 0.4.3
allbib project is a Perl-GTK script for managing bibliographies. more>>
allbib project is a Perl-GTK script for managing bibliographies.
allbib creates, modifies, and checks files that are understood by BibTeX, and provides a graphical interface for all these operations.
Enhancements:
- began porting to Gtk2: allbib.pl should be working if Gtk2::Deprecated is installed
- improved bibtex file parsing in allbib-0.4.2.pl
<<lessallbib creates, modifies, and checks files that are understood by BibTeX, and provides a graphical interface for all these operations.
Enhancements:
- began porting to Gtk2: allbib.pl should be working if Gtk2::Deprecated is installed
- improved bibtex file parsing in allbib-0.4.2.pl
Download (0.049MB)
Added: 2006-10-21 License: GPL (GNU General Public License) Price:
1098 downloads
Biogenesis 0.4
Biogenesis project is a unicellular organism evolution simulator. more>>
Biogenesis project is a unicellular organism evolution simulator.
Biogenesis simulates in a visual fashion the processes involved in the evolution of unicellular organisms in nature.
It tries to be a didactic approximation to the ideas of mutation or evolution, and can be enjoyed also as an entertainment.
Its intended to serve as a support to show students some basic biological facts. The idea of Biogenesis is taken from Primordial Life, but its an independent project.
Main features:
- The application should be multiplatform.
- There should exist translations in many languages. At the moment, there are only Catalan, English and Spanish translations.
- The representation should be abstract and simplified, but still scientifically accurate.
- It should be actively maintained.
- A good documentation should be enclosed with the application.
- It should be amusing.
<<lessBiogenesis simulates in a visual fashion the processes involved in the evolution of unicellular organisms in nature.
It tries to be a didactic approximation to the ideas of mutation or evolution, and can be enjoyed also as an entertainment.
Its intended to serve as a support to show students some basic biological facts. The idea of Biogenesis is taken from Primordial Life, but its an independent project.
Main features:
- The application should be multiplatform.
- There should exist translations in many languages. At the moment, there are only Catalan, English and Spanish translations.
- The representation should be abstract and simplified, but still scientifically accurate.
- It should be actively maintained.
- A good documentation should be enclosed with the application.
- It should be amusing.
Download (0.092MB)
Added: 2006-10-31 License: GPL (GNU General Public License) Price:
1089 downloads
Kanatest 0.4.3
Kanatest project is a hiragana and katakana drill tool. more>>
Kanatest project is a hiragana and katakana drill tool.
Kanatest is a simple, GTK 2-based kana drill tool. It offers three drill modes: hiragana, katakana, and mixed mode.
The tester shows random kana characters and waits until you enter the romaji equivalent in an entry field.
At the end, statistics are provided.
<<lessKanatest is a simple, GTK 2-based kana drill tool. It offers three drill modes: hiragana, katakana, and mixed mode.
The tester shows random kana characters and waits until you enter the romaji equivalent in an entry field.
At the end, statistics are provided.
Download (0.32MB)
Added: 2007-07-11 License: GPL (GNU General Public License) Price:
839 downloads
Agnix 0.0.4
Agnix project is an embedded real-time network operating system kernel. more>>
Agnix project is an embedded real-time network operating system kernel.
It is a small, educational operating system kernel for i386, supporting 32-bit protected memory mode, paging, hardware switched tasks, memory tests, PCI bus, devices, PCI IRQ routing, RT timers, network protocols.
It is available with all the source code and is fully compatible with the Linux kernel API.
Main features:
- Memory: 32-bit protected mode, support for paging
- Virtual memory: supports for memory allocation algorithms (binary and buddy)
- Tasks management: mulithreading, hardware switched tasks, round-robin scheduler
- Synchronization: spinlocks and semaphores
- Interrupts: interrupts serviced in fastirq kernel thread
- Timers: RT timers, 100Hz system clock
- Network: support for ethernet, ARP and IP protocols
- Driver interface: own driver interface named ADI (Agnix Driver Interface)
- Drivers: 8254, 8259, RTC, DMA chips, PCI bus, support for RTL-8029(AS) network card
- Power management: support for APM
- Support for busses: full support for PCI bus, PCI devices and PCI IRQs
- Terminals: support for switched terminals
- Data structures: hashing with open adressing, lists, queues
<<lessIt is a small, educational operating system kernel for i386, supporting 32-bit protected memory mode, paging, hardware switched tasks, memory tests, PCI bus, devices, PCI IRQ routing, RT timers, network protocols.
It is available with all the source code and is fully compatible with the Linux kernel API.
Main features:
- Memory: 32-bit protected mode, support for paging
- Virtual memory: supports for memory allocation algorithms (binary and buddy)
- Tasks management: mulithreading, hardware switched tasks, round-robin scheduler
- Synchronization: spinlocks and semaphores
- Interrupts: interrupts serviced in fastirq kernel thread
- Timers: RT timers, 100Hz system clock
- Network: support for ethernet, ARP and IP protocols
- Driver interface: own driver interface named ADI (Agnix Driver Interface)
- Drivers: 8254, 8259, RTC, DMA chips, PCI bus, support for RTL-8029(AS) network card
- Power management: support for APM
- Support for busses: full support for PCI bus, PCI devices and PCI IRQs
- Terminals: support for switched terminals
- Data structures: hashing with open adressing, lists, queues
Download (0.36MB)
Added: 2006-10-12 License: GPL (GNU General Public License) Price:
1109 downloads
DingsBums?! 0.4.3
DingsBums?! is a flashcard-like learning tool originally concepted for vocabularies. more>>
DingsBums?! is a flashcard-like learning tool originally concepted for vocabularies, but can be used for any kind of content, that can be memorized using flashcards.
Dingsbums?! project aims to be an application which makes memorizing both fun and efficient.
Main features:
- Create new flashcard training stacks (e.g. vocabulary list) from scratch.
- Use units and categories to organize the entries / cards.
- The possibility to define your own entry types with grammatical attributes. E.g. gender and plural for nouns in a language like French. Assign an entry type to each entry. Based on the entry type different attributes will be handled.
- The entry types of existing entries can be changed.
- Entry type attribute items can be edited and a default assigned to each entry type attribute. The entry type attributes can be freely assigned to entry types.
- Deletion of units, categories, entry types, entry type attributes and entry type attribute items is not possible, if they are used in an entry.
- The labels in the GUI can be changed to suit the learning stack card purpose (e.g. different language for a vocabulary trainer)
- The visibility of unit, category, and other fields can be influenced.
- Decide whether changes in an Entry (e.g. the score, the category) while editing or learning are checked immediately against the current selection criteria, and eventually remove the Entry from the current selection.
- Hints of remembrance for learning on by one. By this I mean help, if you do not quite recall a term, but might remember it, if you could get a hint. The hints are:
- Letters: displays more and more letters, starting with the first letter of the word.
- Flash: displays the entire term for less than a second. You might not be able to read the term, but recognize it.
- Shuffle: shuffles the letters within each word
- Three game-like learning environments ("learning by choice"):
- Pick one in a set of answers: e.g. pick the right ansewr out of 4 possible answers for a given question.
- Match base/term with target/definition as pairs of choices by moving the mouse pointer from the question to the matching answer
- Choose the correct answer among lots of possibilities with questions shifting after a few seconds
- An intelligent learning algorithm that shows those entries, which you do not know that well, most often. The main idea is that you earn a point, whenever you know the word, loose a point when you do not know it. And you neither loose or earn, when you remember the word only after having received a hint.
- The scores can be reset to the minimum for either all entries or the current selection.
- The time in milliseconds of the flash hint and the coverage in percents can be dynamically be changed in the properties.
- Window positions and sizes are saved
- Logging to either the command line or a file can be enabled or disabled in properties.
<<lessDingsbums?! project aims to be an application which makes memorizing both fun and efficient.
Main features:
- Create new flashcard training stacks (e.g. vocabulary list) from scratch.
- Use units and categories to organize the entries / cards.
- The possibility to define your own entry types with grammatical attributes. E.g. gender and plural for nouns in a language like French. Assign an entry type to each entry. Based on the entry type different attributes will be handled.
- The entry types of existing entries can be changed.
- Entry type attribute items can be edited and a default assigned to each entry type attribute. The entry type attributes can be freely assigned to entry types.
- Deletion of units, categories, entry types, entry type attributes and entry type attribute items is not possible, if they are used in an entry.
- The labels in the GUI can be changed to suit the learning stack card purpose (e.g. different language for a vocabulary trainer)
- The visibility of unit, category, and other fields can be influenced.
- Decide whether changes in an Entry (e.g. the score, the category) while editing or learning are checked immediately against the current selection criteria, and eventually remove the Entry from the current selection.
- Hints of remembrance for learning on by one. By this I mean help, if you do not quite recall a term, but might remember it, if you could get a hint. The hints are:
- Letters: displays more and more letters, starting with the first letter of the word.
- Flash: displays the entire term for less than a second. You might not be able to read the term, but recognize it.
- Shuffle: shuffles the letters within each word
- Three game-like learning environments ("learning by choice"):
- Pick one in a set of answers: e.g. pick the right ansewr out of 4 possible answers for a given question.
- Match base/term with target/definition as pairs of choices by moving the mouse pointer from the question to the matching answer
- Choose the correct answer among lots of possibilities with questions shifting after a few seconds
- An intelligent learning algorithm that shows those entries, which you do not know that well, most often. The main idea is that you earn a point, whenever you know the word, loose a point when you do not know it. And you neither loose or earn, when you remember the word only after having received a hint.
- The scores can be reset to the minimum for either all entries or the current selection.
- The time in milliseconds of the flash hint and the coverage in percents can be dynamically be changed in the properties.
- Window positions and sizes are saved
- Logging to either the command line or a file can be enabled or disabled in properties.
Download (3.4MB)
Added: 2006-10-06 License: GPL (GNU General Public License) Price:
1113 downloads
KTranslator 0.4
KTranslator is a program to translate words from one language to another. more>>
KTranslator project can translate words from one language to another. KTranslator should support any language (I hope that) and come with a plugin system, to ease the addition of new dictionaries.
The main idea behind KTranslator is to translate a word without disturb the application in use. So, when the user selects a word, KTranslator will try to translate the word and show the result in a popup window. It behaves like Babylon for Windows.
<<lessThe main idea behind KTranslator is to translate a word without disturb the application in use. So, when the user selects a word, KTranslator will try to translate the word and show the result in a popup window. It behaves like Babylon for Windows.
Download (0.50MB)
Added: 2006-03-22 License: GPL (GNU General Public License) Price:
1314 downloads
sdcv 0.4.2
sdcv is a console version of StarDict program. more>>
sdcv is a console version of StarDict program.
Enhancements:
- The cache scheme has been rewritten, and the size of the cache has been reduced.
- The program was merged with stardict.
- Lookup was speeded up.
- Full-text searching was added.
- The Russian translation has been updated.
<<lessEnhancements:
- The cache scheme has been rewritten, and the size of the cache has been reduced.
- The program was merged with stardict.
- Lookup was speeded up.
- Full-text searching was added.
- The Russian translation has been updated.
Download (0.16MB)
Added: 2006-04-24 License: GPL (GNU General Public License) Price:
1278 downloads
Vocatra 0.4
Vocatra is a console-based vocabulary trainer. more>>
Vocatra is a console-based vocabulary trainer. The project takes one or more vocabulary files, queries you for each word, and lets you try to give the correct answer. You can enable different learning modes.
If you prefer to learn sequentially it has an order mode. Otherwise, there is also a random mode available.
Installation on UNIX or Windows Cygwin:
If you downloaded the source distribution, you need the following packages to build the executable.
The GNU C++ Compiler g++ and GNU make
In order to generate a man-page, you will need perl.
At last also the gettext package
The installation is done by following the next steps:
Unpack the archive, unless you already have done that:
tar -xzf vocatra-$VERSION.tar.gz #gzip archive OR
tar -xjf vocatra-$VERSION.tar.bz2 #bzip archive
Run the configure script:
./configure
For an overview of configuration options use:
./configure --help
Compile the programm by running make:
make
Install the programm:
make install
If you want to uninstall Vocatra, use the next command:
make uninstall
Enhancements:
- This release adds a "query each synonym" and "alphabetical mode" feature.
- It fixes also a issue with the default setting, "compare case-sensitively".
<<lessIf you prefer to learn sequentially it has an order mode. Otherwise, there is also a random mode available.
Installation on UNIX or Windows Cygwin:
If you downloaded the source distribution, you need the following packages to build the executable.
The GNU C++ Compiler g++ and GNU make
In order to generate a man-page, you will need perl.
At last also the gettext package
The installation is done by following the next steps:
Unpack the archive, unless you already have done that:
tar -xzf vocatra-$VERSION.tar.gz #gzip archive OR
tar -xjf vocatra-$VERSION.tar.bz2 #bzip archive
Run the configure script:
./configure
For an overview of configuration options use:
./configure --help
Compile the programm by running make:
make
Install the programm:
make install
If you want to uninstall Vocatra, use the next command:
make uninstall
Enhancements:
- This release adds a "query each synonym" and "alphabetical mode" feature.
- It fixes also a issue with the default setting, "compare case-sensitively".
Download (MB)
Added: 2007-07-25 License: GPL (GNU General Public License) Price:
821 downloads
JAdvisor 0.4.6
JAdvisor project is a college class scheduler and course planner. more>>
JAdvisor project is a college class scheduler, course planner, and course search program.
It also allows college students to view their schedules graphically and create an optimal schedule.
Adapters are used to customize JAdvisor for your particular school.
Enhancements:
- SchoolAdapter throws new Exceptions
- Added SplitPanes to SchedulerUI and PlannerUI
- PlannerUI displays semester names
- Text Box bug fixed
- Scheduler UI bugfixes
- NCSU adapter bugfixes
- UNC adapter updated
<<lessIt also allows college students to view their schedules graphically and create an optimal schedule.
Adapters are used to customize JAdvisor for your particular school.
Enhancements:
- SchoolAdapter throws new Exceptions
- Added SplitPanes to SchedulerUI and PlannerUI
- PlannerUI displays semester names
- Text Box bug fixed
- Scheduler UI bugfixes
- NCSU adapter bugfixes
- UNC adapter updated
Download (0.27MB)
Added: 2006-10-11 License: GPL (GNU General Public License) Price:
1110 downloads
Docutils 0.4
Docutils is an open-source text processing system for processing plaintext documentation into useful formats. more>>
Docutils is an open-source text processing system for processing plaintext documentation into useful formats, such as HTML or LaTeX.
Docutils project includes reStructuredText, the easy to read, easy to use, what-you-see-is-what-you-get plaintext markup language.
<<lessDocutils project includes reStructuredText, the easy to read, easy to use, what-you-see-is-what-you-get plaintext markup language.
Download (1.2MB)
Added: 2006-01-11 License: Public Domain Price:
1382 downloads
amaroKportable 0.4
amaroKportable theme is based in iamarokPod. more>>
amaroKportable theme is based in iamarokPod:
http://www.kde-look.org/content/show.php?content=34241
You need pyXML in order to launch it.
Unpack, install eurostyle font and launch it.
Buttons:
*left button of digital joystick is preview
*right button of digital joystick is next track
*"sound" button is mute
*X button is play/pause
*vol + increase volume
*vol - decrease volume
<<lesshttp://www.kde-look.org/content/show.php?content=34241
You need pyXML in order to launch it.
Unpack, install eurostyle font and launch it.
Buttons:
*left button of digital joystick is preview
*right button of digital joystick is next track
*"sound" button is mute
*X button is play/pause
*vol + increase volume
*vol - decrease volume
Download (0.30MB)
Added: 2006-06-29 License: GPL (GNU General Public License) Price:
1212 downloads
vidiprinter 0.4
vidiprinter provides a display of the BBCs vidiprinter for soccer fans. more>>
vidiprinter provides a display of the BBCs vidiprinter for soccer fans.
Please suggest/mail me any aesthetic improvements as Im no artist. Most alterations can be achieved in the global declarations of the python script. The background images are in the images directory.
<<lessPlease suggest/mail me any aesthetic improvements as Im no artist. Most alterations can be achieved in the global declarations of the python script. The background images are in the images directory.
Download (0.024MB)
Added: 2006-07-06 License: GPL (GNU General Public License) Price:
1206 downloads
GlassTaskBar 0.4
GlassTaskBar is a Superkaramba theme intended as a Kicker replacement (atleast thats how I use it). more>>
GlassTaskBar is a Superkaramba theme intended as a Kicker replacement (atleast thats how I use it).
GlassTaskBar provides the KDE menu, desktop switcher, task switcher, CPU meter/graph, memory and internet traffic meter and a time/date display with mail notifier.
Ive cleaned up the source as much as possible, and it is fairly easy to change the
look of the bar, the order of its components or add new components.
Credits to:
mytharak - for the GlassHUD SuperKaramba theme
<<lessGlassTaskBar provides the KDE menu, desktop switcher, task switcher, CPU meter/graph, memory and internet traffic meter and a time/date display with mail notifier.
Ive cleaned up the source as much as possible, and it is fairly easy to change the
look of the bar, the order of its components or add new components.
Credits to:
mytharak - for the GlassHUD SuperKaramba theme
Download (0.021MB)
Added: 2006-07-11 License: GPL (GNU General Public License) Price:
1200 downloads
ComixCursors 0.4.3
ComixCursors is an icon pack which provides original Comix Cursors. more>>
ComixCursors is an icon pack which provides original Comix Cursors.
Main features:
- X11 mouse theme with a comics feeling.
- Package comes with 42 different mouse themes for X11.
- 5 colors (black, blue, green, orange and white)
- 4 different sizes (small, regular, large and huge)
- 2 different weights (slim and normal)
- and one for christmas and one with ghost
Any bug report or improvement idea is very welcome. See the "how to install" link below for installation instructions on KDE. Else extract the archive in ~/.icons/ .
With the sources download below you can configure and build your own set of cursors regarding transparency, outline- fill- and shadow-color, the size and various other options. See the scripts and README included. Note that you *must* have inkscape and ImageMagick installed to make use of it.
The cursors are named according to the freedesktop cursor naming convention now. The rest is linked. I hope nothing is missing. Additional cursors for mozilla/firefox are availlable.
Want left-handed cursors? Take the "-LH" downloads below.
The RPM installation has moved in 0.4.2 from /usr/X11R6/lib/X11/icons to /usr/share/icons, so if you installed a previous version by rpm you better uninstall the package first - things might get messed up.
Enhancements:
- Fixed .theme file syntax, cursors dont appear as icons in gnome any more (thanx to Sune Vuorela).
<<lessMain features:
- X11 mouse theme with a comics feeling.
- Package comes with 42 different mouse themes for X11.
- 5 colors (black, blue, green, orange and white)
- 4 different sizes (small, regular, large and huge)
- 2 different weights (slim and normal)
- and one for christmas and one with ghost
Any bug report or improvement idea is very welcome. See the "how to install" link below for installation instructions on KDE. Else extract the archive in ~/.icons/ .
With the sources download below you can configure and build your own set of cursors regarding transparency, outline- fill- and shadow-color, the size and various other options. See the scripts and README included. Note that you *must* have inkscape and ImageMagick installed to make use of it.
The cursors are named according to the freedesktop cursor naming convention now. The rest is linked. I hope nothing is missing. Additional cursors for mozilla/firefox are availlable.
Want left-handed cursors? Take the "-LH" downloads below.
The RPM installation has moved in 0.4.2 from /usr/X11R6/lib/X11/icons to /usr/share/icons, so if you installed a previous version by rpm you better uninstall the package first - things might get messed up.
Enhancements:
- Fixed .theme file syntax, cursors dont appear as icons in gnome any more (thanx to Sune Vuorela).
Download (MB)
Added: 2007-03-02 License: GPL (GNU General Public License) Price:
576 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above pearpc 0.4 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed