mp3 encoder mandriva
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 911
BladeEnc 0.9.4.2
BladeEnc is a cross-platform MP3 encoder. more>>
BladeEnc is a freeware MP3 encoder. It is based on the same ISO compression routines as mpegEnc, so you can expect roughly the same, or better, quality . The main difference is the appearance and speed.
BladeEnc doesnt have a nice, user-friendly interface like mpegEnc, but it is more than three times faster, and it works with several popular front-end graphical user interfaces.
BladeEncs output quality is one of those rare subjects that completely divides the world in two parts. Either you love it or you hate it, there never seems to be an opinion inbetween. Different audiophiles and mp3 experts tends to come to completely different conclusions depending on their methods and testsamples.
The reason for this is of course that BladeEnc is a very different mp3 encoder (compared to Fraunhofer, LAME etc) with a very unique approach to mp3 encoding.
In order to compress sound to an mp3 file, you need to make certain sacrifices in quality. Taking into account how we percieve sound, the mp3 encoder tries to remove the details that it believes us to be least likely to notice. How much that needs to be removed depends on the bitrate and the encoder often has the choice of doing different kinds of sacrifices.
It can remove low volume tones that are "shadowed" by high volume tones of similar frequencies, remove the high frequency part of the sound spectrum, cut down the stereo effect (so called joint stereo) and simply decrease the samplerate. What approach is the best depends on a lot of things, like the style of music and the selected bitrate.
Main features:
- Sourcecode available under the LGPL-license!
- Stereo or Mono output. Can downmix to Mono on the fly.
- Supports the following bitrates: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320 kBit/s. However, for bitrates lower than 128 kBit we seriously recommend you to use another encoder.
- Flags like Private, Original and Copyright can be set.
- Input samples can be in either 32, 44.1 or 48 kHz.
- Both 8 and 16-bit samples are supported.
- Working CRC checksum generation (since 0.80). The ISO reference code had broken CRC calculations, which has been inherited into every ISO based encoder that havent added a fix for it.
- Can be plugged directly into many popular 3rd party products, giving them integrated mp3 encoding abilities.
- Encodes chunks of data from memory to memory, no need to use files or pipes.
- Can be compiled for nearly any operating system still in use.
- Commandline based, makes it easy to include BladeEnc into BAT files and shell scripts.
- Only mp3 encoder that supports gapless encoding.
- Reads standard uncompressed WAV- and AIFF-files as well as well as RAW PCM-data.
- Batch encoding. Can encode any number of samples in a row.
- Wildcards supported. You can for example encode all WAV-files in a directory by typing *.WAV".
- Input samples can be automatically deleted after encoding.
- Large selection of graphical frontends available.
- Task priority can be set from the commandline and is by default set to LOWEST so that you still can use your computer effectively while encoding (Windows & OS/2 only).
- Full support for pipes and redirection (stdin and stdout).
- Textbased configuration file where you can change default settings.
<<lessBladeEnc doesnt have a nice, user-friendly interface like mpegEnc, but it is more than three times faster, and it works with several popular front-end graphical user interfaces.
BladeEncs output quality is one of those rare subjects that completely divides the world in two parts. Either you love it or you hate it, there never seems to be an opinion inbetween. Different audiophiles and mp3 experts tends to come to completely different conclusions depending on their methods and testsamples.
The reason for this is of course that BladeEnc is a very different mp3 encoder (compared to Fraunhofer, LAME etc) with a very unique approach to mp3 encoding.
In order to compress sound to an mp3 file, you need to make certain sacrifices in quality. Taking into account how we percieve sound, the mp3 encoder tries to remove the details that it believes us to be least likely to notice. How much that needs to be removed depends on the bitrate and the encoder often has the choice of doing different kinds of sacrifices.
It can remove low volume tones that are "shadowed" by high volume tones of similar frequencies, remove the high frequency part of the sound spectrum, cut down the stereo effect (so called joint stereo) and simply decrease the samplerate. What approach is the best depends on a lot of things, like the style of music and the selected bitrate.
Main features:
- Sourcecode available under the LGPL-license!
- Stereo or Mono output. Can downmix to Mono on the fly.
- Supports the following bitrates: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320 kBit/s. However, for bitrates lower than 128 kBit we seriously recommend you to use another encoder.
- Flags like Private, Original and Copyright can be set.
- Input samples can be in either 32, 44.1 or 48 kHz.
- Both 8 and 16-bit samples are supported.
- Working CRC checksum generation (since 0.80). The ISO reference code had broken CRC calculations, which has been inherited into every ISO based encoder that havent added a fix for it.
- Can be plugged directly into many popular 3rd party products, giving them integrated mp3 encoding abilities.
- Encodes chunks of data from memory to memory, no need to use files or pipes.
- Can be compiled for nearly any operating system still in use.
- Commandline based, makes it easy to include BladeEnc into BAT files and shell scripts.
- Only mp3 encoder that supports gapless encoding.
- Reads standard uncompressed WAV- and AIFF-files as well as well as RAW PCM-data.
- Batch encoding. Can encode any number of samples in a row.
- Wildcards supported. You can for example encode all WAV-files in a directory by typing *.WAV".
- Input samples can be automatically deleted after encoding.
- Large selection of graphical frontends available.
- Task priority can be set from the commandline and is by default set to LOWEST so that you still can use your computer effectively while encoding (Windows & OS/2 only).
- Full support for pipes and redirection (stdin and stdout).
- Textbased configuration file where you can change default settings.
Download (0.05MB)
Added: 2005-05-10 License: LGPL (GNU Lesser General Public License) Price:
2371 downloads
LAME MP3 Encoder 3.98.2
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR. more>> LAME development started around mid-1998. Mike Cheng started it as a patch against the 8hz-MP3 encoder sources. After some quality concerns raised by others, he decided to start from scratch based on the dist10 sources. His goal was only to speed up the dist10 sources, and leave its quality untouched. That branch (a patch against the reference sources) became Lame 2.0, and only on Lame 3.81 did we replaced of all dist10 code, making LAME no more only a patch.
The project quickly became a team project. Mike Cheng eventually left leadership and started working on tooLame, an MP2 encoder. Mark Taylor became leader and started pursuing increased quality in addition to better speed. He can be considered the initiator of the LAME project in its current form. He released version 3.0 featuring gpsycho, a new psychoacoustic model he developed.
In early 2003 Mark left project leadership, and since then the project has been lead through the cooperation of the active developers (currently 4 individuals).
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR, mostly thanks to the dedicated work of its developers and the open source licensing model that allowed the project to tap into engineering resources from all around the world. Both quality and speed improvements are still happening, probably making LAME the only MP3 encoder still being actively developed.<<less
Download (1.27MB)
Added: 2009-04-08 License: Freeware Price:
198 downloads
Other version of LAME MP3 Encoder
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at ... Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR, mostly thanksLicense:Freeware
POE::Component::Enc::Mp3 1.2
POE::Component::Enc::Mp3 is a mp3 encoder wrapper. more>>
POE::Component::Enc::Mp3 is a mp3 encoder wrapper.
SYNOPSIS
use POE qw(Component::Enc::Mp3);
$mp3 = POE::Component::Enc::Mp3->new($bitrate => 160);
$mp3->enc("/tmp/tst.wav");
POE::Kernel->run();
This POE component encodes raw audio files into mp3 format. It is merely a wrapper for the notlame program.
METHODS
The module provides an object oriented interface as follows:
new
Used to initialise the system and create a module instance. The following parameters are available:
alias
Indicates the name of a session to which module callbacks are posted. Default: main.
bitrate
Should be self-evident. If left unspecified, defaults to 160.
enc < file-name > [del-orig]
Encodes the given file, naming it with a .mp3 extension. An optional true value for the second parameter indicates that the original file should be deleted.
e.g. $mp3->enc("/tmp/tst.wav");
<<lessSYNOPSIS
use POE qw(Component::Enc::Mp3);
$mp3 = POE::Component::Enc::Mp3->new($bitrate => 160);
$mp3->enc("/tmp/tst.wav");
POE::Kernel->run();
This POE component encodes raw audio files into mp3 format. It is merely a wrapper for the notlame program.
METHODS
The module provides an object oriented interface as follows:
new
Used to initialise the system and create a module instance. The following parameters are available:
alias
Indicates the name of a session to which module callbacks are posted. Default: main.
bitrate
Should be self-evident. If left unspecified, defaults to 160.
enc < file-name > [del-orig]
Encodes the given file, naming it with a .mp3 extension. An optional true value for the second parameter indicates that the original file should be deleted.
e.g. $mp3->enc("/tmp/tst.wav");
Download (0.003MB)
Added: 2006-11-07 License: Perl Artistic License Price:
1081 downloads
Mandriva Linux 2008
Mandriva Linux One 2008 is the best way to start using Linux. more>> Mandriva Linux One 2008 is the best way to start using Linux. A full Linux operating system on a single CD for both new and experienced Linux users, it is fast to download and install, and also safe to try with a live mode. One is really the one CD you need!
<<less
Download (696.66MB)
Added: 2009-04-09 License: Freeware Price: Free
227 downloads
WideMP3 1.0-beta1
WideMP3 is a relatively simple distributed MP3 encoder. more>>
WideMP3 is a relatively simple distributed MP3 encoder. It works in a client-server fashion, with multiple servers and a client that feeds the PCM audio over a network connection to the server. The server sends back the encoded audio, which the client then writes to a file. The actual encoding is done via an external encoder, such as BladeEnc.
Installation is very simple simple.
Extract the source distribution, and compile and install as follows:
./configure
make
su
make install
Current supported platforms are:
Debian GNU/Linux 2.2 on Intel x86 and Alpha.
Debian GNU/Linux 2.1 on Intel x86
OpenBSD 2.7 on Intel x86
It should also work on FreeBSD, although this has not yet been tested. Positive and negative reports on different platforms will be appreciated, especially if accompanied by a patch to make it work.
If you want to contribute a patch, you must be willing for the patch to be released under the GNU General Public License. Patches should be in context diff format (diff -c) or unified diff format (diff -u).
Currently supported MP3 encoders:
Bladeenc 0.9x - http://bladeenc.mp3.no/
Positive and negative reports for different encoders will be appreciated, especially if accompanied by a patch to make it work.
<<lessInstallation is very simple simple.
Extract the source distribution, and compile and install as follows:
./configure
make
su
make install
Current supported platforms are:
Debian GNU/Linux 2.2 on Intel x86 and Alpha.
Debian GNU/Linux 2.1 on Intel x86
OpenBSD 2.7 on Intel x86
It should also work on FreeBSD, although this has not yet been tested. Positive and negative reports on different platforms will be appreciated, especially if accompanied by a patch to make it work.
If you want to contribute a patch, you must be willing for the patch to be released under the GNU General Public License. Patches should be in context diff format (diff -c) or unified diff format (diff -u).
Currently supported MP3 encoders:
Bladeenc 0.9x - http://bladeenc.mp3.no/
Positive and negative reports for different encoders will be appreciated, especially if accompanied by a patch to make it work.
Download (0.062MB)
Added: 2006-07-20 License: GPL (GNU General Public License) Price:
1191 downloads
Mandriva Linux One 2007
Mandriva Linux One is a complete Mandriva Linux system, which you can use directly from the CD. more>>
Mandriva Linux One is a complete Mandriva Linux system, which you can use directly from the CD.
It includes Openoffice.org, kde, mozilla-firefox, gimp, amarok...
You are welcome to test, especially the installation wizard.
Please report the problems on bugzilla for the distribution.
You only need one CD, just pick the one depending of you language.
<<lessIt includes Openoffice.org, kde, mozilla-firefox, gimp, amarok...
You are welcome to test, especially the installation wizard.
Please report the problems on bugzilla for the distribution.
You only need one CD, just pick the one depending of you language.
Download (696MB)
Added: 2006-10-22 License: GPL (GNU General Public License) Price:
1122 downloads
Apache::MP3::Resample 4.00
Apache::MP3::Resample can downsample MP3/FLAC/Shorten files during streaming. more>>
Apache::MP3::Resample can downsample MP3/FLAC/Shorten files during streaming.
SYNOPSIS
# httpd.conf or access.conf
AddType audio/shorten .shn .SHN
AddType audio/flac .flac
Alias /apache_mp3 /usr/share/libapache-mp3-perl
< Location /songs >
SetHandler perl-script
PerlHandler Apache::MP3::Resample
PerlSetVar CacheDir /var/cache/Apache::MP3
PerlSetVar AllowDownload no
PerlSetVar SortFields Album,Track,Title,-Duration
PerlSetVar Fields Track,Title,Artist,Album,Duration,Bitrate
< /Location >
Apache::MP3::Resample subclasses Apache::MP3::Playlist to allow the user to downsample audio files before streaming them. This allows users on slower connections to stream songs. When this module is installed, a menu of bitrates is presented in the upper right-hand corner of the screen. The user can choose from one of the bitrates, or select a mode that performs no resampling. The selected bitrate is maintained in a persistent cookie so that resampling is performed whenever the user returns to the site.
This module requires a command-line MP3 encoder to resample and reencode the audio data. If not otherwise specified, Apache::MP3::Resample will try to use the Open Source Lame MP3 encoder. This utility is available at http://www.sulaco.org/mp3. Version 3.90 was used during the development of this module. Your results with other versions may vary.
When you install Lame (or the encoder of your choice), be sure to place it in a directory located in Apaches PATH so that the module can find them at run time. You may need to set the PATH environment variable during Apaches launch, or by explicitly adding a SetEnv directive to the Apache configuration file.
You should be aware that the decoding/reencoding process is CPU-intensive, and server performance may degrade as the number of simultaneous users increases.
<<lessSYNOPSIS
# httpd.conf or access.conf
AddType audio/shorten .shn .SHN
AddType audio/flac .flac
Alias /apache_mp3 /usr/share/libapache-mp3-perl
< Location /songs >
SetHandler perl-script
PerlHandler Apache::MP3::Resample
PerlSetVar CacheDir /var/cache/Apache::MP3
PerlSetVar AllowDownload no
PerlSetVar SortFields Album,Track,Title,-Duration
PerlSetVar Fields Track,Title,Artist,Album,Duration,Bitrate
< /Location >
Apache::MP3::Resample subclasses Apache::MP3::Playlist to allow the user to downsample audio files before streaming them. This allows users on slower connections to stream songs. When this module is installed, a menu of bitrates is presented in the upper right-hand corner of the screen. The user can choose from one of the bitrates, or select a mode that performs no resampling. The selected bitrate is maintained in a persistent cookie so that resampling is performed whenever the user returns to the site.
This module requires a command-line MP3 encoder to resample and reencode the audio data. If not otherwise specified, Apache::MP3::Resample will try to use the Open Source Lame MP3 encoder. This utility is available at http://www.sulaco.org/mp3. Version 3.90 was used during the development of this module. Your results with other versions may vary.
When you install Lame (or the encoder of your choice), be sure to place it in a directory located in Apaches PATH so that the module can find them at run time. You may need to set the PATH environment variable during Apaches launch, or by explicitly adding a SetEnv directive to the Apache configuration file.
You should be aware that the decoding/reencoding process is CPU-intensive, and server performance may degrade as the number of simultaneous users increases.
Download (0.32MB)
Added: 2006-06-22 License: Perl Artistic License Price:
1221 downloads
MP3c 0.31
MP3c is a special program for converting audio-cds to mp3/ogg-format. more>>
MP3c is a special program for converting audio-cds to ogg/mp3-format. It is a frontend for every grab-program and mp3-encoder. Nearly every program should be supported. MP3c has two different run-modes: An interactive mode with a menu-enviroment (based on curses-lib), which can used on textconsoles as well under X11, and a batchmode, which allows automatic encoding of cds inside shellscripts (eg at night within cronjobs).
There are two different possibilities for encoding (depends on your ripper and encoder): Non-Fly encoding, where an audio-track is first grabbed from cds and then encoded, and On-Fly encoding, where grabbing and encoding is one step. Normally you should refer to Non-Fly encoding, since your cdrom-drive hasnt to work all the time, and some encoder produces a "click" at the beginning of mp3/ogg-files if On-Fly encoding is used. The only disadvantage of Non-Fly encoding is, that there is a temp-file, which can grow up to 50-100 MB sometimes.
Information about songtitle on your cds are received with help of CDDB database. In contrast to other programs, an CDDB-entry is detailed analyzed to find every information even for sampler-cds.
Creation of filenames is userdefined. You can use pattern to constitute the appearance of your mp3-files individually. Furthermore you can decide how spaces within filenames should be handled (you can allow them, convert them to underscores "_" or just kill them).
Interessting is the possibility of shellscript creation, which contains all functionality for encoding your cds. You can start these scripts as daemon-processes or run them at night inside a cronjob.
Recommended programs for the use of MP3c are: CDparanoia as audio-cd grabber, Encoder as MP3-encoder and MP3info for creating MP3-ID-tags. For OGG use oggenc. If you need, you can download these programs here, or a complete package with these programs inside. Furthermore you can download runable binaries, but only for glibc 2.1 (linux i386) at the moment. If you like to create RPMs and/or binaries for other systems and libraries, please send these to me, so that I can put it on my page.
Enhancements:
- Switched to CDDB protocol level 5 to support detection and saving of year and genre information.
<<lessThere are two different possibilities for encoding (depends on your ripper and encoder): Non-Fly encoding, where an audio-track is first grabbed from cds and then encoded, and On-Fly encoding, where grabbing and encoding is one step. Normally you should refer to Non-Fly encoding, since your cdrom-drive hasnt to work all the time, and some encoder produces a "click" at the beginning of mp3/ogg-files if On-Fly encoding is used. The only disadvantage of Non-Fly encoding is, that there is a temp-file, which can grow up to 50-100 MB sometimes.
Information about songtitle on your cds are received with help of CDDB database. In contrast to other programs, an CDDB-entry is detailed analyzed to find every information even for sampler-cds.
Creation of filenames is userdefined. You can use pattern to constitute the appearance of your mp3-files individually. Furthermore you can decide how spaces within filenames should be handled (you can allow them, convert them to underscores "_" or just kill them).
Interessting is the possibility of shellscript creation, which contains all functionality for encoding your cds. You can start these scripts as daemon-processes or run them at night inside a cronjob.
Recommended programs for the use of MP3c are: CDparanoia as audio-cd grabber, Encoder as MP3-encoder and MP3info for creating MP3-ID-tags. For OGG use oggenc. If you need, you can download these programs here, or a complete package with these programs inside. Furthermore you can download runable binaries, but only for glibc 2.1 (linux i386) at the moment. If you like to create RPMs and/or binaries for other systems and libraries, please send these to me, so that I can put it on my page.
Enhancements:
- Switched to CDDB protocol level 5 to support detection and saving of year and genre information.
Download (0.20MB)
Added: 2006-07-30 License: GPL (GNU General Public License) Price:
1184 downloads
RipperX 2.7.0
ripperX is an audio CD ripper + encoder GUI including CDDB support and the ability to encode as OGG, FLAC, MP3 and MP2 (toolame) more>>
RipperX is a GTK program to rip CD audio and encode it into MP3, OGG, or FLAC files.
It can rip and encode in parallel, and has plugins for cdparanoia, BladeEnc, Lame, GoGo, FHG (l3enc and mp3enc), XingMp3enc, 8hz-mp3, and the ISO encoder.
RipperX also has support for CDDB and ID3v1 tags.
Enhancements:
- bug fixing release
<<lessIt can rip and encode in parallel, and has plugins for cdparanoia, BladeEnc, Lame, GoGo, FHG (l3enc and mp3enc), XingMp3enc, 8hz-mp3, and the ISO encoder.
RipperX also has support for CDDB and ID3v1 tags.
Enhancements:
- bug fixing release
Download (0.16MB)
Added: 2006-07-16 License: GPL (GNU General Public License) Price:
1198 downloads
MP3FS 0.07
MP3FS is A read-only FUSE filesystem which transcodes audio formats (currently FLAC) to MP3 on the fly when opened and read. more>>
&MP3FS is A read-only FUSE filesystem which transcodes audio formats (currently FLAC) to MP3 on the fly when opened and read. This was written to enable me to use my FLAC collection with software and/or hardware which only understands MP3. e.g. gmediaserver to a netgear MP101 mp3 player.
MP3FS is also a novel alternative to traditional mp3 encoder applications. Just use your favorite file browser to select the files you want encoded and copy them somewhere!
How it Works:
When a file is opened, the decoder and encoder are initialised and the file metadata is read. At this time the final filesize can be determined as we only support constant bitrate mp3s.
ID3v2 tags are created from the vorbis comments in the flac file. They are located at the start of the file. As such, an application scanning a directory to read tags should not cause too much of a performance hit as the actual encoder does not need to be invoked (depending on how much data the read asks for).
A special exception to this is when an application tries to read the very last block first. Many applications do this to look for an id3v1 tag (stored in the last 128 bytes of the file). When this is detected, the filesystem simply return zeros (I dont support id3v1 tags). This dramatically speeds up applications, however it could potentially lead to corrupt mp3 files if the zeros are still in kernel cache when the application comes back to read the actual audio sequentially. In my experimentation this has not happened, I always get another read for the final block.
As the file is read, it is transcoded into an internal per-file buffer. This buffer continues to grow while the file is being read until the whole file is transcoded in memory. The memory is freed only when the file is closed. This simplifies the implementation.
Seeking within a file will cause the file to be transcoded up to the seek point (if not already done). This is not usually a problem since most programs will read a file from start to finish. Future enhancements may provide true random seeking.
For build instructions see INSTALL
Usage:
mount your filesystem like this: (you will probably have to be root)
mp3fs musicdir bitrate mountpoint [-o fuse_options]
e.g.:
mp3fs /mnt/music 256 /mnt/mp3 -o allow_other,ro
Here are the original files:
dave@bender:~/mp3fs$ ls -l /mnt/music/Smashing Pumpkins/Pisces Iscariot/
total 345732
-rw-r--r-- 1 mythtv mythtv 10267876 2005-06-19 18:36 01 - Soothe.flac
-rw-r--r-- 1 mythtv mythtv 23512276 2005-06-19 18:36 02 - Frail And Bedazzled.flac
-rw-r--r-- 1 mythtv mythtv 23332187 2005-06-19 18:36 03 - Plum.flac
-rw-r--r-- 1 mythtv mythtv 26402936 2005-06-19 18:36 04 - Whir.flac
-rw-r--r-- 1 mythtv mythtv 21591252 2005-06-19 18:36 05 - Blew Away.flac
-rw-r--r-- 1 mythtv mythtv 16719855 2005-06-19 18:36 06 - Pissant.flac
-rw-r--r-- 1 mythtv mythtv 33454889 2005-06-19 18:36 07 - Hello Kitty Kat.flac
-rw-r--r-- 1 mythtv mythtv 32073747 2005-06-19 18:36 08 - Obscured.flac
-rw-r--r-- 1 mythtv mythtv 17614217 2005-06-19 18:36 09 - Landslide.flac
-rw-r--r-- 1 mythtv mythtv 65406696 2005-06-19 18:36 10 - Starla.flac
-rw-r--r-- 1 mythtv mythtv 18651734 2005-06-19 18:36 11 - Blue.flac
-rw-r--r-- 1 mythtv mythtv 25055200 2005-06-19 18:36 12 - Girl Named Sandoz.flac
-rw-r--r-- 1 mythtv mythtv 28060023 2005-06-19 18:36 13 - La Dolly Vita.flac
-rw-r--r-- 1 mythtv mythtv 11432008 2005-06-19 18:36 14 - Spaced.flac
And now you can use the (virtual) mp3 files from the MP3FS mountpoint:
dave@bender:~/mp3fs$ ls -l /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/
total 345732
-rw-r--r-- 1 mythtv mythtv 2446849 2005-06-19 18:36 01 - Soothe.mp3
-rw-r--r-- 1 mythtv mythtv 3197934 2005-06-19 18:36 02 - Frail And Bedazzled.mp3
-rw-r--r-- 1 mythtv mythtv 3467503 2005-06-19 18:36 03 - Plum.mp3
-rw-r--r-- 1 mythtv mythtv 4003745 2005-06-19 18:36 04 - Whir.mp3
-rw-r--r-- 1 mythtv mythtv 3414845 2005-06-19 18:36 05 - Blew Away.mp3
-rw-r--r-- 1 mythtv mythtv 2413413 2005-06-19 18:36 06 - Pissant.mp3
-rw-r--r-- 1 mythtv mythtv 4348572 2005-06-19 18:36 07 - Hello Kitty Kat.mp3
-rw-r--r-- 1 mythtv mythtv 5132656 2005-06-19 18:36 08 - Obscured.mp3
-rw-r--r-- 1 mythtv mythtv 3099704 2005-06-19 18:36 09 - Landslide.mp3
-rw-r--r-- 1 mythtv mythtv 10542719 2005-06-19 18:36 10 - Starla.mp3
-rw-r--r-- 1 mythtv mythtv 3210041 2005-06-19 18:36 11 - Blue.mp3
-rw-r--r-- 1 mythtv mythtv 3449127 2005-06-19 18:36 12 - Girl Named Sandoz.mp3
-rw-r--r-- 1 mythtv mythtv 4098213 2005-06-19 18:36 13 - La Dolly Vita.mp3
-rw-r--r-- 1 mythtv mythtv 2337344 2005-06-19 18:36 14 - Spaced.mp3
dave@bender:~/mp3fs$ id3info /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3
*** Tag information for /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3
=== TSSE (Software/Hardware and settings used for encoding): LAME v3.96.1
=== TIT2 (Title/songname/content description): Soothe
=== TPE1 (Lead performer(s)/Soloist(s)): Smashing Pumpkins
=== TALB (Album/Movie/Show title): Pisces Iscariot
=== TRCK (Track number/Position in set): 1
*** mp3 info
MPEG1/layer III
Bitrate: 128KBps
Frequency: 44KHz
dave@bender:~/mp3fs$ time cp /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3 /tmp/
real 0m12.917s
user 0m0.004s
sys 0m0.020s
dave@bender:~/mp3fs$ xmms /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/*
Enhancements:
- A segfault and several memory leaks were fixed.
<<lessMP3FS is also a novel alternative to traditional mp3 encoder applications. Just use your favorite file browser to select the files you want encoded and copy them somewhere!
How it Works:
When a file is opened, the decoder and encoder are initialised and the file metadata is read. At this time the final filesize can be determined as we only support constant bitrate mp3s.
ID3v2 tags are created from the vorbis comments in the flac file. They are located at the start of the file. As such, an application scanning a directory to read tags should not cause too much of a performance hit as the actual encoder does not need to be invoked (depending on how much data the read asks for).
A special exception to this is when an application tries to read the very last block first. Many applications do this to look for an id3v1 tag (stored in the last 128 bytes of the file). When this is detected, the filesystem simply return zeros (I dont support id3v1 tags). This dramatically speeds up applications, however it could potentially lead to corrupt mp3 files if the zeros are still in kernel cache when the application comes back to read the actual audio sequentially. In my experimentation this has not happened, I always get another read for the final block.
As the file is read, it is transcoded into an internal per-file buffer. This buffer continues to grow while the file is being read until the whole file is transcoded in memory. The memory is freed only when the file is closed. This simplifies the implementation.
Seeking within a file will cause the file to be transcoded up to the seek point (if not already done). This is not usually a problem since most programs will read a file from start to finish. Future enhancements may provide true random seeking.
For build instructions see INSTALL
Usage:
mount your filesystem like this: (you will probably have to be root)
mp3fs musicdir bitrate mountpoint [-o fuse_options]
e.g.:
mp3fs /mnt/music 256 /mnt/mp3 -o allow_other,ro
Here are the original files:
dave@bender:~/mp3fs$ ls -l /mnt/music/Smashing Pumpkins/Pisces Iscariot/
total 345732
-rw-r--r-- 1 mythtv mythtv 10267876 2005-06-19 18:36 01 - Soothe.flac
-rw-r--r-- 1 mythtv mythtv 23512276 2005-06-19 18:36 02 - Frail And Bedazzled.flac
-rw-r--r-- 1 mythtv mythtv 23332187 2005-06-19 18:36 03 - Plum.flac
-rw-r--r-- 1 mythtv mythtv 26402936 2005-06-19 18:36 04 - Whir.flac
-rw-r--r-- 1 mythtv mythtv 21591252 2005-06-19 18:36 05 - Blew Away.flac
-rw-r--r-- 1 mythtv mythtv 16719855 2005-06-19 18:36 06 - Pissant.flac
-rw-r--r-- 1 mythtv mythtv 33454889 2005-06-19 18:36 07 - Hello Kitty Kat.flac
-rw-r--r-- 1 mythtv mythtv 32073747 2005-06-19 18:36 08 - Obscured.flac
-rw-r--r-- 1 mythtv mythtv 17614217 2005-06-19 18:36 09 - Landslide.flac
-rw-r--r-- 1 mythtv mythtv 65406696 2005-06-19 18:36 10 - Starla.flac
-rw-r--r-- 1 mythtv mythtv 18651734 2005-06-19 18:36 11 - Blue.flac
-rw-r--r-- 1 mythtv mythtv 25055200 2005-06-19 18:36 12 - Girl Named Sandoz.flac
-rw-r--r-- 1 mythtv mythtv 28060023 2005-06-19 18:36 13 - La Dolly Vita.flac
-rw-r--r-- 1 mythtv mythtv 11432008 2005-06-19 18:36 14 - Spaced.flac
And now you can use the (virtual) mp3 files from the MP3FS mountpoint:
dave@bender:~/mp3fs$ ls -l /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/
total 345732
-rw-r--r-- 1 mythtv mythtv 2446849 2005-06-19 18:36 01 - Soothe.mp3
-rw-r--r-- 1 mythtv mythtv 3197934 2005-06-19 18:36 02 - Frail And Bedazzled.mp3
-rw-r--r-- 1 mythtv mythtv 3467503 2005-06-19 18:36 03 - Plum.mp3
-rw-r--r-- 1 mythtv mythtv 4003745 2005-06-19 18:36 04 - Whir.mp3
-rw-r--r-- 1 mythtv mythtv 3414845 2005-06-19 18:36 05 - Blew Away.mp3
-rw-r--r-- 1 mythtv mythtv 2413413 2005-06-19 18:36 06 - Pissant.mp3
-rw-r--r-- 1 mythtv mythtv 4348572 2005-06-19 18:36 07 - Hello Kitty Kat.mp3
-rw-r--r-- 1 mythtv mythtv 5132656 2005-06-19 18:36 08 - Obscured.mp3
-rw-r--r-- 1 mythtv mythtv 3099704 2005-06-19 18:36 09 - Landslide.mp3
-rw-r--r-- 1 mythtv mythtv 10542719 2005-06-19 18:36 10 - Starla.mp3
-rw-r--r-- 1 mythtv mythtv 3210041 2005-06-19 18:36 11 - Blue.mp3
-rw-r--r-- 1 mythtv mythtv 3449127 2005-06-19 18:36 12 - Girl Named Sandoz.mp3
-rw-r--r-- 1 mythtv mythtv 4098213 2005-06-19 18:36 13 - La Dolly Vita.mp3
-rw-r--r-- 1 mythtv mythtv 2337344 2005-06-19 18:36 14 - Spaced.mp3
dave@bender:~/mp3fs$ id3info /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3
*** Tag information for /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3
=== TSSE (Software/Hardware and settings used for encoding): LAME v3.96.1
=== TIT2 (Title/songname/content description): Soothe
=== TPE1 (Lead performer(s)/Soloist(s)): Smashing Pumpkins
=== TALB (Album/Movie/Show title): Pisces Iscariot
=== TRCK (Track number/Position in set): 1
*** mp3 info
MPEG1/layer III
Bitrate: 128KBps
Frequency: 44KHz
dave@bender:~/mp3fs$ time cp /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/01 - Soothe.mp3 /tmp/
real 0m12.917s
user 0m0.004s
sys 0m0.020s
dave@bender:~/mp3fs$ xmms /mnt/mp3/Smashing Pumpkins/Pisces Iscariot/*
Enhancements:
- A segfault and several memory leaks were fixed.
Download (0.32MB)
Added: 2007-04-09 License: GPL (GNU General Public License) Price:
932 downloads
Grip 3.3.1
Grip is a CD player and CD ripper/MP3-encoder for the GNOME desktop. more>>
Grip is a CD player and CD ripper/MP3-encoder for the GNOME desktop. It has the ripping capabilities of cdparanoia built in, but can also use external rippers (such as cdda2wav).
It also provides an automated frontend for MP3 encoders (presets for lame, bladeenc, l3enc, xingmp3enc, mp3encode, and gogo), letting you take a disc and transform it easily straight into MP3s.
The Ogg Vorbis format is also supported. Internet disc lookups are supported for retrieving track information from disc database servers.
Grip works with DigitalDJ to provide a unified, "computerized" version of your music collection.
Main features:
- Full-featured CD player with a small screen footprint in "condensed" mode
- Database lookup/submission to share track information over the net
- HTTP proxy support for those behind firewalls
- Loop, shuffle, and playlist modes
- Ripping of single, multiple, or partial tracks
- Encoding of ripped .wav files into MP3 files (as well support for OGG and FLAC)
- Simultaneous rip and encode
- Support for multiple encode processes on SMP machines
- Adding ID3v1/v2 tags to MP3 files
- Cooperating with DigitalDJ, my SQL-based MP3 jukebox
Enhancements:
- de.po: updated (G?tz Waschk)
- it.po: updated (Ceoldo Costantino)
- fr.po: updated (Eric Lassauge)
- pl_PL.po: added (Piotr Adamocha)
- id3.c: put a zero byte before the id3v1 track number (Vladimir Petrov)
- discdb.c: string parsing fixes to support i18n (Vladimir Petrov)
- discdb.c: better handling of non-UTF-8 local discdb files (Vladimir Petrov)
- various: tweaks to filesystem-safe character escaping (Vladimir Petrov)
- cdplay.c: allow retrieving of non-UTF-8 discdb entries (Vladimir Petrov)
- discdb.c: fixed a possible buffer overflow crash (Dean Brettle)
- grip.spec.in: added some missing BuildRequires (Stephen E. Dudek)
- configure.in: upped version to 3.3.1
<<lessIt also provides an automated frontend for MP3 encoders (presets for lame, bladeenc, l3enc, xingmp3enc, mp3encode, and gogo), letting you take a disc and transform it easily straight into MP3s.
The Ogg Vorbis format is also supported. Internet disc lookups are supported for retrieving track information from disc database servers.
Grip works with DigitalDJ to provide a unified, "computerized" version of your music collection.
Main features:
- Full-featured CD player with a small screen footprint in "condensed" mode
- Database lookup/submission to share track information over the net
- HTTP proxy support for those behind firewalls
- Loop, shuffle, and playlist modes
- Ripping of single, multiple, or partial tracks
- Encoding of ripped .wav files into MP3 files (as well support for OGG and FLAC)
- Simultaneous rip and encode
- Support for multiple encode processes on SMP machines
- Adding ID3v1/v2 tags to MP3 files
- Cooperating with DigitalDJ, my SQL-based MP3 jukebox
Enhancements:
- de.po: updated (G?tz Waschk)
- it.po: updated (Ceoldo Costantino)
- fr.po: updated (Eric Lassauge)
- pl_PL.po: added (Piotr Adamocha)
- id3.c: put a zero byte before the id3v1 track number (Vladimir Petrov)
- discdb.c: string parsing fixes to support i18n (Vladimir Petrov)
- discdb.c: better handling of non-UTF-8 local discdb files (Vladimir Petrov)
- various: tweaks to filesystem-safe character escaping (Vladimir Petrov)
- cdplay.c: allow retrieving of non-UTF-8 discdb entries (Vladimir Petrov)
- discdb.c: fixed a possible buffer overflow crash (Dean Brettle)
- grip.spec.in: added some missing BuildRequires (Stephen E. Dudek)
- configure.in: upped version to 3.3.1
Download (0.57MB)
Added: 2005-06-29 License: GPL (GNU General Public License) Price:
1578 downloads
Skype For Linux Mandriva 1.2
Skype linux Mandriva allows you to make calls from your computer. more>> Skype is a little piece of software that allows you to make calls from your computer. Talk for as long as you like without worrying about the cost or the distance.
Free Skype-to-Skype calls
Make video calls
Send cheap text messages
Easy conference calling
Free to download
RPM version
Open console
Log on as superuser ("root")
Find the location where you saved the RPM
Enter the following command: "rpm -U skype-version.rpm", where skype-version.rpm is the name of the file you downloaded, such as skype-0_90_0_1.rpm.<<less
Download (7.44MB)
Added: 2009-04-25 License: Freeware Price: Free
181 downloads
Mandriva Linux 2007.1 / 2008 Beta 1
Mandriva Linux is the operating system of choice for users keen on all things advanced. more>>
Mandriva Linux 2007 is the ultimate version of Mandriva Linux. It is the fruit of the convergence of three technologies: Mandriva, Conectiva and Lycoris.
Mandriva Linux 2007 is also more easy-to-use, more user-friendly and more powerful. It is ideal for the needs of all customers, from the beginner to the SOHO user.
Whats New in 2007.1 Stable Release:
- Mandriva is proud to announce the release of its brand new distribution that provides up-to-date and freshly released open source software: Mandriva Linux 2007 Spring. Mandriva Linux 2007 Spring integrates the latest innovations in the fields of office suite applications, Internet, multimedia and virtualization technologies. Not only does Mandriva Linux 2007 Spring bring to users the most advanced Linux operating system, it also includes some very special new features: WengoPhone, Google Picasa and Google Earth, Drakvirt...
Whats New in 2008 Beta 1 Development Release:
- The first beta of Mandriva Linux 2008, code-named Cassini, is now available. This beta is available only as a 3-CD Free edition (containing no non-free software or drivers) for the x86-32 architecture, with a traditional installer. Future betas will be available in One live / install CD hybrid editions with proprietary drivers, and in x86-64 variants." Whats new? " Default NTFS write support; AppArmor; modular IDE drivers; new devicescape wireless stack; Compiz Fusion replaces Beryl; Linux kernel 2.6.22, GNOME 2.19, KDE 3.5.7 and 4 preview, Xfce 4.4.1....
<<lessMandriva Linux 2007 is also more easy-to-use, more user-friendly and more powerful. It is ideal for the needs of all customers, from the beginner to the SOHO user.
Whats New in 2007.1 Stable Release:
- Mandriva is proud to announce the release of its brand new distribution that provides up-to-date and freshly released open source software: Mandriva Linux 2007 Spring. Mandriva Linux 2007 Spring integrates the latest innovations in the fields of office suite applications, Internet, multimedia and virtualization technologies. Not only does Mandriva Linux 2007 Spring bring to users the most advanced Linux operating system, it also includes some very special new features: WengoPhone, Google Picasa and Google Earth, Drakvirt...
Whats New in 2008 Beta 1 Development Release:
- The first beta of Mandriva Linux 2008, code-named Cassini, is now available. This beta is available only as a 3-CD Free edition (containing no non-free software or drivers) for the x86-32 architecture, with a traditional installer. Future betas will be available in One live / install CD hybrid editions with proprietary drivers, and in x86-64 variants." Whats new? " Default NTFS write support; AppArmor; modular IDE drivers; new devicescape wireless stack; Compiz Fusion replaces Beryl; Linux kernel 2.6.22, GNOME 2.19, KDE 3.5.7 and 4 preview, Xfce 4.4.1....
Download (4357MB)
Added: 2007-08-08 License: GPL (GNU General Public License) Price:
506 downloads
LAME 3.97
LAME is an MP3 encoder and graphical frame analyzer. more>>
LAME is short from LAME Aint an MP3 Encoder and is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, simple frontend application, a much-improved psycho-acoustic model (GPSYCHO), and a graphical frame analyzer (MP3x).
Please note that any commercial use (including distributing the LAME encoding engine in a free encoder) may require a patent license from Thomson Multimedia.
Main features:
- Many improvements in quality in speed over ISO reference software. See history.
- MPEG1,2 and 2.5 layer III encoding.
- CBR (constant bitrate) and two types of variable bitrate, VBR and ABR.
- Encoding engine can be compiled as a shared library (Linux/UNIX), DLL or ACM codec (Windows)
- free format encoding and decoding
- GPSYCHO: a GPLd psycho acoustic and noise shaping model.
- Powerfull and easy to use presets
- Quality is comparable to FhG encoding engines and substantially better than most other encoders.
- Fast! Encodes faster than real time on a PII 266 at highest quality mode.
- MP3x: a GTK/X-Window MP3 frame analyzer for both .mp3 and unencoded audio files.
Software which uses "LAME":
- andromeda (PHP and ASP) Dynamically presents collections of mp3s as streaming web sites.
- rip (Perl) Script for ripping and encoding.
- avifile AVI/DIVX encoder and decoder for Linux.
- Grip (Linux) gtk-based cd-player, ripper and encoder. Supports cddb, cdparanoia and LAME.
- jbm2 (Linux) A KDE jukebox style application for public places (bars, pubs,...)
- Krabber (Linux) A KDE ripper & encoder, can use LAME.
- Mp3Maker (Linux) A WindowMaker enhanced front end to cdda2wav/cdparanoia and lame/bladeenc.
- dekagenc (Linux) Bourne shell script for ripping, encoding and CDDB naming.
- ripperX (Linux) GTK frontend for rippers and several encoders featuring CDDB support.
- T.E.A.R. (Linux) frontend to LAME, cdparanoia and CDDB.
- Xmcd. (Linux) CD Player with CDDB and ripping to MP3 and OGG.
- xtunes (Linux) GTK frontend for LAME, MAD, cdparanoia, cdrecord and more.
- DropMP3 (Mac) includes LAME binaries.
- CDex (Windows) Ripper & encoder, includes LAME binaries (the Blade compatible dll)
- Lamedrop (Windows) OggDrop style frontend.
- LAMEX (Windows) An activex control for LAME, and a GUI. Source code only, includes LAME.
- m3w (Windows) A live mp3 streamer for the WWW. Works with LAME, icecast, soundcard input
- out_lame (Windows) Winamp output plug-in. Create MP3 files directly from Winamp!
- RazorLame (Windows) The RazorBlade front end now supports LAME.
- winLAME (Windows) The only *nice* windows UI for LAME, according to the author :-)
- DarkIce Live streamer for IceCast.
- LiveIce Real time streaming of mp3s. Works with IceCast
- MuSE A mixing, encoding and streaming engine.
- Flash Forth a Flash-like development library
Enhancements:
- This version is identical to 3.97b3, which was promoted to release.
<<lessPlease note that any commercial use (including distributing the LAME encoding engine in a free encoder) may require a patent license from Thomson Multimedia.
Main features:
- Many improvements in quality in speed over ISO reference software. See history.
- MPEG1,2 and 2.5 layer III encoding.
- CBR (constant bitrate) and two types of variable bitrate, VBR and ABR.
- Encoding engine can be compiled as a shared library (Linux/UNIX), DLL or ACM codec (Windows)
- free format encoding and decoding
- GPSYCHO: a GPLd psycho acoustic and noise shaping model.
- Powerfull and easy to use presets
- Quality is comparable to FhG encoding engines and substantially better than most other encoders.
- Fast! Encodes faster than real time on a PII 266 at highest quality mode.
- MP3x: a GTK/X-Window MP3 frame analyzer for both .mp3 and unencoded audio files.
Software which uses "LAME":
- andromeda (PHP and ASP) Dynamically presents collections of mp3s as streaming web sites.
- rip (Perl) Script for ripping and encoding.
- avifile AVI/DIVX encoder and decoder for Linux.
- Grip (Linux) gtk-based cd-player, ripper and encoder. Supports cddb, cdparanoia and LAME.
- jbm2 (Linux) A KDE jukebox style application for public places (bars, pubs,...)
- Krabber (Linux) A KDE ripper & encoder, can use LAME.
- Mp3Maker (Linux) A WindowMaker enhanced front end to cdda2wav/cdparanoia and lame/bladeenc.
- dekagenc (Linux) Bourne shell script for ripping, encoding and CDDB naming.
- ripperX (Linux) GTK frontend for rippers and several encoders featuring CDDB support.
- T.E.A.R. (Linux) frontend to LAME, cdparanoia and CDDB.
- Xmcd. (Linux) CD Player with CDDB and ripping to MP3 and OGG.
- xtunes (Linux) GTK frontend for LAME, MAD, cdparanoia, cdrecord and more.
- DropMP3 (Mac) includes LAME binaries.
- CDex (Windows) Ripper & encoder, includes LAME binaries (the Blade compatible dll)
- Lamedrop (Windows) OggDrop style frontend.
- LAMEX (Windows) An activex control for LAME, and a GUI. Source code only, includes LAME.
- m3w (Windows) A live mp3 streamer for the WWW. Works with LAME, icecast, soundcard input
- out_lame (Windows) Winamp output plug-in. Create MP3 files directly from Winamp!
- RazorLame (Windows) The RazorBlade front end now supports LAME.
- winLAME (Windows) The only *nice* windows UI for LAME, according to the author :-)
- DarkIce Live streamer for IceCast.
- LiveIce Real time streaming of mp3s. Works with IceCast
- MuSE A mixing, encoding and streaming engine.
- Flash Forth a Flash-like development library
Enhancements:
- This version is identical to 3.97b3, which was promoted to release.
Download (1.3MB)
Added: 2006-09-24 License: GPL (GNU General Public License) Price:
1205 downloads
Mandriva Linux Limited Edition 2005
Mandriva Linux (formerly Mandrake Linux) is the operating system of choice for users keen on all things advanced more>>
Mandriva Linux Limited Edition 2005 offers a completely right choice for users who are keen on all things advanced.
Mandriva LinuxTM , formerly known as Mandrakelinux, is a friendly Linux Operating System which specializes in ease-of-use for both servers and the home/office. It is freely available in many languages throughout the world. Mandriva Linux is the operating system of choice for users keen on all things advanced. Limited Edition 2005 is no exception; it includes all the things youve come to expect from Mandriva Linux.
Limited Edition 2005 is the only Linux system so far to include such a broad range of up-to-date leading-edge software, as well as seamlessly running 32-bit applications on 64-bit platforms. Linux power users will welcome the advanced web experience, enhanced hardware compatibility and expanded development options brought by Limited Edition 2005, along with significant performance gains.
The latest versions of key Linux applications:
- Linux kernel 2.6.11.6
- KDE 3.3.2 (with some backports from version 3.4, including Kpdf)
- GNOME 2.8.3
- Firefox 1.0.2
- GCC 3.4.3
- The GIMP 2.2
- cdrecord 2.01.01a21 (with DVD+R dual-layer support)
- OpenOffice.org 1.1.4
- MySQL 4.1.11
Download (3MB)
Added: 2005-05-03 License: Freeware Price: FREE
33 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above mp3 encoder mandriva search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
