backup32 1.9
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 151
cutmp3 1.9.2
cutmp3 is a small and fast command line MP3 editor. more>>
cutmp3 is a small and fast command line MP3 editor. cutmp3 lets you select sections of an MP3 interactively or via a timetable and save them to separate files without quality loss.
It uses mpg123 for playback and works with VBR files and even with files bigger than 2GB.
Other features are configurable silence seeking and ID3 tag seeking, which are useful for concatenated mp3s.
Playback is realized via mpg123, so be sure to have it installed or at least have a symlink to your favorite mp3 playing program.
I recommend a symlink to mpg321 which works better!
You can mark beginning and end of a segment with a and b and save the segment with s.
Using a timetable or direct times with VBR files delivers exact(!) results at the cost of slightly lower speed. cutmp3 even works with files bigger than 2 GB!
If you want a working graphical software you can try mp3directcut,
which runs fairly well in WINE after I asked the author about a WINEd version.
Installation:
make (you will need readline-devel or similar!)
install it to /usr/bin with
make install
Enhancements:
- A small fix for timetable cutting with negative values has been made.
- Another option for silence seeking has been added.
- The documentation has been updated.
<<lessIt uses mpg123 for playback and works with VBR files and even with files bigger than 2GB.
Other features are configurable silence seeking and ID3 tag seeking, which are useful for concatenated mp3s.
Playback is realized via mpg123, so be sure to have it installed or at least have a symlink to your favorite mp3 playing program.
I recommend a symlink to mpg321 which works better!
You can mark beginning and end of a segment with a and b and save the segment with s.
Using a timetable or direct times with VBR files delivers exact(!) results at the cost of slightly lower speed. cutmp3 even works with files bigger than 2 GB!
If you want a working graphical software you can try mp3directcut,
which runs fairly well in WINE after I asked the author about a WINEd version.
Installation:
make (you will need readline-devel or similar!)
install it to /usr/bin with
make install
Enhancements:
- A small fix for timetable cutting with negative values has been made.
- Another option for silence seeking has been added.
- The documentation has been updated.
Download (0.033MB)
Added: 2007-04-06 License: GPL (GNU General Public License) Price:
931 downloads
byacc 1.9.1
Berkeley Yacc is an LALR(1) parser generator. more>>
Berkeley Yacc is an LALR(1) parser generator. Berkeley Yacc has been made as compatible as possible with AT&T Yacc. Berkeley Yacc can accept any input specification that conforms to the AT&T Yacc documentation. Specifications that take advantage of undocumented features of AT&T Yacc will probably be rejected.
Berkeley Yacc is distributed with no warranty whatever. The code is certain to contain errors. Neither the author nor any contributor takes responsibility for any consequences of its use.
Berkeley Yacc is in the public domain. The data structures and algorithms used in Berkeley Yacc are all either taken from documents available to the general public or are inventions of the author. Anyone may freely distribute
source or binary forms of Berkeley Yacc whether unchanged or modified. Distributers may charge whatever fees they can obtain for Berkeley Yacc. Programs generated by Berkeley Yacc may be distributed freely.
<<lessBerkeley Yacc is distributed with no warranty whatever. The code is certain to contain errors. Neither the author nor any contributor takes responsibility for any consequences of its use.
Berkeley Yacc is in the public domain. The data structures and algorithms used in Berkeley Yacc are all either taken from documents available to the general public or are inventions of the author. Anyone may freely distribute
source or binary forms of Berkeley Yacc whether unchanged or modified. Distributers may charge whatever fees they can obtain for Berkeley Yacc. Programs generated by Berkeley Yacc may be distributed freely.
Download (0.063MB)
Added: 2007-02-15 License: GPL (GNU General Public License) Price:
986 downloads
pycups 1.9.46
pycups library is a set of Python bindings for the CUPS API. more>>
pycups 1.9.46 offers a wide range of Python bindings for the CUPS API.
Enhancements
- Printing a test page now works with CUPS 1.4
- Bindings have been added for localizing IPP reasons and marker names from PPD files.
Requirements: Python
Added: 2009-06-18 License: GPL Price: FREE
12 downloads
Other version of pycups
pycups library is a set of Python bindings for the CUPS API. pycups 1.9.23 - TimLicense:GPL (GNU General Public License)
Jackcess 1.1.9
Jackess is a pure Java library for reading and writing MS Access databases. more>>
Jackcess ia a pure Java library for reading from and writing to MS Access databases. Jackcess is not an application.
There is no GUI. Its a library, intended for other developers to use to build Java applications. Jackcess is licensed under the GNU Lesser General Public License.
Enhancements:
- Support for writing large table definitions was added.
- Handling of usage maps for large tables was fixed.
- Some edge cases for reading numeric columns were fixed.
<<lessThere is no GUI. Its a library, intended for other developers to use to build Java applications. Jackcess is licensed under the GNU Lesser General Public License.
Enhancements:
- Support for writing large table definitions was added.
- Handling of usage maps for large tables was fixed.
- Some edge cases for reading numeric columns were fixed.
Download (0.10MB)
Added: 2007-07-13 License: LGPL (GNU Lesser General Public License) Price:
833 downloads
kdepopup 0.1.9
kdepopup is a project that allows you to receive and send messages via Samba. more>>
kdepopup is a project that allows you to receive and send messages via Samba.
kdepopup uses smbclient to send SMB messages. Incoming SMB messages will be shown in a seperate window.
You may reply to these messages or save them to a file.
kdepopup is running as a server under KDE and can also issue smbclient -M commands.
This lets you receive, send and reply to these messages.
It relies on a running nmbd (and I think smbd).
Enhancements:
- now with more error recovery and session management
<<lesskdepopup uses smbclient to send SMB messages. Incoming SMB messages will be shown in a seperate window.
You may reply to these messages or save them to a file.
kdepopup is running as a server under KDE and can also issue smbclient -M commands.
This lets you receive, send and reply to these messages.
It relies on a running nmbd (and I think smbd).
Enhancements:
- now with more error recovery and session management
Download (0.31MB)
Added: 2006-10-26 License: GPL (GNU General Public License) Price:
1093 downloads
NAS 1.9
The Network Audio System is a network transparent, client/server audio transport system. more>>
NAS (Network Audio System) is a network transparent, client/server audio transport system.
Network Audio System (NAS), originally developed at Network Computing Devices (NCD), includes:
Sample server implementations
- VOXware/OSS (FreeBSD, Linux, SVR4.[02], UnixWare, Microsoft Windows using Cygwin)
- HPUX (HPPA, HP-UX 10.x, 11.x)
- Sun Sparc/Intel Solaris 2.x, AM79C30A Digital Subscriber Controller and Sparc 10 Dual
- SGI Indigo (IRIX 5.x)
An application programming interface library
A variety of sample applications
Main features:
- Device-independent audio over the network
- Lots of audio file and data formats
- Can store sounds in server for rapid replay
- Extensive mixing, separating, and manipulation of audio data
- Simultaneous use of audio devices by multiple applications
- Use by a growing number of ISVs
- Small size
- Free! No obnoxious licensing terms
Enhancements:
- This version fixes several DOS attacks that could be carried out against a nasd server.
- Most of the server and client code was made ANSI compliant.
- Input and output mixer handling in the voxware (OSS) server was significantly reworked.
<<lessNetwork Audio System (NAS), originally developed at Network Computing Devices (NCD), includes:
Sample server implementations
- VOXware/OSS (FreeBSD, Linux, SVR4.[02], UnixWare, Microsoft Windows using Cygwin)
- HPUX (HPPA, HP-UX 10.x, 11.x)
- Sun Sparc/Intel Solaris 2.x, AM79C30A Digital Subscriber Controller and Sparc 10 Dual
- SGI Indigo (IRIX 5.x)
An application programming interface library
A variety of sample applications
Main features:
- Device-independent audio over the network
- Lots of audio file and data formats
- Can store sounds in server for rapid replay
- Extensive mixing, separating, and manipulation of audio data
- Simultaneous use of audio devices by multiple applications
- Use by a growing number of ISVs
- Small size
- Free! No obnoxious licensing terms
Enhancements:
- This version fixes several DOS attacks that could be carried out against a nasd server.
- Most of the server and client code was made ANSI compliant.
- Input and output mixer handling in the voxware (OSS) server was significantly reworked.
Download (1.4MB)
Added: 2007-04-11 License: MIT/X Consortium License Price:
928 downloads
JukePeg 1.9
JukePeg is an MP3 decoder/player that is controlled from a socket interface - easily driven from Perl. more>>
JukePeg is an MP3 decoder/player that is controlled from a socket interface - easily driven from Perl. It supports more than one output device (and can play different tracks to each), and is able to fade-in, fade-out and overlap tracks. The volume, fade-in, fade-out and overlap settings can be set on a track by track basis.
The MPEG decoder is taken from the FreeAmp (http://www.freeamp.org) source, so many thanks to them. On IA32 the decoder will use assembler functions for some of the decoder if you have the NASM assembler installedon that machine.
An alternative MPEG decoder from the MPG123 project (http://www.mpg123.com) is also included; JukePeg can be built using either decoder.
The code was built and tested on an IA32 Debian system (2.2r2) using the GCC 2.95.2 compiler (a quick test was also done on a DEC Alpha box). Id be interested to hear from anyone who builds it on a big-endian machine.
If you have multiple sound devices you can list them in the DEVICES entry in /etc/jukepeg.conf so that JukePeg controls all of them.
<<lessThe MPEG decoder is taken from the FreeAmp (http://www.freeamp.org) source, so many thanks to them. On IA32 the decoder will use assembler functions for some of the decoder if you have the NASM assembler installedon that machine.
An alternative MPEG decoder from the MPG123 project (http://www.mpg123.com) is also included; JukePeg can be built using either decoder.
The code was built and tested on an IA32 Debian system (2.2r2) using the GCC 2.95.2 compiler (a quick test was also done on a DEC Alpha box). Id be interested to hear from anyone who builds it on a big-endian machine.
If you have multiple sound devices you can list them in the DEVICES entry in /etc/jukepeg.conf so that JukePeg controls all of them.
Download (0.10MB)
Added: 2006-07-19 License: GPL (GNU General Public License) Price:
1192 downloads
bftpd 1.9.3
bftpd program is a small, easy-to-configure FTP server. more>>
bftpd program is a small, easy-to-configure FTP server. It strives to be fast, secure and quick to install/configure.
Main features:
- Easy configuration
- Speed
- Support for most RFC FTP commands
- tar.gz on-the-fly compression/archiving
- Security with chroot without special setup
- No need for files (sh, ls...) in a chroot environment
- Logging to wtmp and to a logfile or syslog
- PAM and passwd/shadow support
- Support for SITE CHOWN/CHMOD
Running the server:
bftpd runs in either standalone or inetd mode.
If you want inetd mode
Add the following to your /etc/inetd.conf:
ftp stream tcp nowait root /usr/sbin/bftpd bftpd
Give inetd a HUP or reboot your system. Your FTP server should work now.
If you want inetd mode with xinetd
Add the following to your /etc/xinetd.conf:
service ftp
{
disable = no
socket_type = stream
wait = no
user = root
server = /usr/sbin/bftpd
log_on_success += DURATION USERID
log_on_failure += USERID
nice = 10
}
<<lessMain features:
- Easy configuration
- Speed
- Support for most RFC FTP commands
- tar.gz on-the-fly compression/archiving
- Security with chroot without special setup
- No need for files (sh, ls...) in a chroot environment
- Logging to wtmp and to a logfile or syslog
- PAM and passwd/shadow support
- Support for SITE CHOWN/CHMOD
Running the server:
bftpd runs in either standalone or inetd mode.
If you want inetd mode
Add the following to your /etc/inetd.conf:
ftp stream tcp nowait root /usr/sbin/bftpd bftpd
Give inetd a HUP or reboot your system. Your FTP server should work now.
If you want inetd mode with xinetd
Add the following to your /etc/xinetd.conf:
service ftp
{
disable = no
socket_type = stream
wait = no
user = root
server = /usr/sbin/bftpd
log_on_success += DURATION USERID
log_on_failure += USERID
nice = 10
}
Download (0.11MB)
Added: 2007-07-23 License: GPL (GNU General Public License) Price:
829 downloads
jpeg2ps 1.9
jpeg2ps is a utility for converting JPEG images to compressed PostScript Level 2 or 3 files (without uncompressing the images). more>>
jpeg2ps is a utility for converting JPEG images to compressed PostScript Level 2 or 3 files (without uncompressing the images).
The JPEG data is simply >wrapped< with PostScript which yields considerably smaller PS files. This project is a simple command line utility and can be used on DOS, Windows and Unix machines.
Usage: jpeg2ps [options] jpegfile > epsfile
-a auto rotate: produce landscape output if width > height
-b binary mode: output 8 bit data (default: 7 bit with ASCII85)
-h hex mode: output 7 bit data in ASCIIHex encoding
-o < name > output file name
-p < size > page size name. Known names are:
a0, a1, a2, a3, a4, a5, a6, b5, letter, legal, ledger, p11x17
-q quiet mode: suppress all informational messages
-r < dpi > resolution value (dots per inch)
0 means use value given in file, if any (disables autorotate)
<<lessThe JPEG data is simply >wrapped< with PostScript which yields considerably smaller PS files. This project is a simple command line utility and can be used on DOS, Windows and Unix machines.
Usage: jpeg2ps [options] jpegfile > epsfile
-a auto rotate: produce landscape output if width > height
-b binary mode: output 8 bit data (default: 7 bit with ASCII85)
-h hex mode: output 7 bit data in ASCIIHex encoding
-o < name > output file name
-p < size > page size name. Known names are:
a0, a1, a2, a3, a4, a5, a6, b5, letter, legal, ledger, p11x17
-q quiet mode: suppress all informational messages
-r < dpi > resolution value (dots per inch)
0 means use value given in file, if any (disables autorotate)
Download (0.065MB)
Added: 2007-03-15 License: Freeware Price:
586 downloads
Cycles3D 1.9
Cycles3D is a light cycles simulation. more>>
Cycles3D project is a light cycles simulation.
Cycles3D is an action-arcade simulation where you drive a futuristic motorcycle that leaves a wall trail, and you must coax opponent motorcycles into hitting your wall.
Install:
# ./configure
# make
# make install
<<lessCycles3D is an action-arcade simulation where you drive a futuristic motorcycle that leaves a wall trail, and you must coax opponent motorcycles into hitting your wall.
Install:
# ./configure
# make
# make install
Download (1.2MB)
Added: 2006-12-07 License: GPL (GNU General Public License) Price:
1053 downloads
GuiJPEG2PS 1.9.4
GuiJPEG2PS is a free multiplatform graphic frontend for jpeg2ps. more>>
GuiJPEG2PS project is a free multiplatform graphic frontend for jpeg2ps.
GuiJPEG2PS does not include jpeg2ps, it contemplates only sending commands that should be written from command line.
All the images (jpeg, jpg, jpe) are going to be converted with the same options.
<<lessGuiJPEG2PS does not include jpeg2ps, it contemplates only sending commands that should be written from command line.
All the images (jpeg, jpg, jpe) are going to be converted with the same options.
Download (0.012MB)
Added: 2007-01-16 License: GPL (GNU General Public License) Price:
1014 downloads
eXtace 1.9.6
eXtace is a Audio Visualization plugin for the X-Window System. more>>
eXtace is a Audio Visualization plugin for the X-Window System.
eXtace project connects to ESD (Enlightened Sound Daemon) and displays the audio data as either a pseudo 3D flying landscape, pseudo 3D pointed landscape, 16-256 channel graphic EQ, multi-mode Oscilloscopes, Horizontal Spectrogram, or a combination Hi-res FFT with a Vertical Spectrogram.
All modes are fully scalable to nearly ANY resolution! (within your CPU/X11 capabilites) Resolutions up to 1600x1200 at 40 FPS use typially less than 30% CPU, depending on your host CPU/X11 capabilities.
Enhancements:
- Fixed problem with dragging of traces.
- Added new line EQ mode., removed old code cruft.
<<lesseXtace project connects to ESD (Enlightened Sound Daemon) and displays the audio data as either a pseudo 3D flying landscape, pseudo 3D pointed landscape, 16-256 channel graphic EQ, multi-mode Oscilloscopes, Horizontal Spectrogram, or a combination Hi-res FFT with a Vertical Spectrogram.
All modes are fully scalable to nearly ANY resolution! (within your CPU/X11 capabilites) Resolutions up to 1600x1200 at 40 FPS use typially less than 30% CPU, depending on your host CPU/X11 capabilities.
Enhancements:
- Fixed problem with dragging of traces.
- Added new line EQ mode., removed old code cruft.
Download (0.42MB)
Added: 2006-12-04 License: GPL (GNU General Public License) Price:
1056 downloads
VLAN 1.9
VLAN is an implementation of the 802.1Q VLAN protocol for Linux. more>>
VLAN is an implementation of the 802.1Q VLAN protocol for Linux.
VLAN allows one to have Virtual LANs on a single ethernet cable, giving you the ability to segregate LANs efficiently. VLAN should support up to 4094 vlan interfaces per ethernet device.
Main features:
- Implements 802.1Q VLAN spec.
- Implements support for a non-standard (as far as I know) MAC-based VLAN functionality.
- Can support up to 4094 VLANs per ethernet interface.
- Scales well in critical paths: O(n), where n is the number of PHYSICAL ethernet interfaces, and that is only on ingress. O(1) in every other critical path, as far as I know.
- Supports MULTICAST
- Can change MAC address of VLAN.
- Multiple naming conventions supported, and adjustable at runtime.
- Optional header-reordering, to make the VLAN interface look JUST LIKE an Ethernet interface. This fixes some problems with DHCPd and anything else that uses a SOCK_PACKET socket. Default setting is off, which works for every other protocol I know about, and is slightly faster.
Enhancements:
- This release fixes return error codes in vconfig.
<<lessVLAN allows one to have Virtual LANs on a single ethernet cable, giving you the ability to segregate LANs efficiently. VLAN should support up to 4094 vlan interfaces per ethernet device.
Main features:
- Implements 802.1Q VLAN spec.
- Implements support for a non-standard (as far as I know) MAC-based VLAN functionality.
- Can support up to 4094 VLANs per ethernet interface.
- Scales well in critical paths: O(n), where n is the number of PHYSICAL ethernet interfaces, and that is only on ingress. O(1) in every other critical path, as far as I know.
- Supports MULTICAST
- Can change MAC address of VLAN.
- Multiple naming conventions supported, and adjustable at runtime.
- Optional header-reordering, to make the VLAN interface look JUST LIKE an Ethernet interface. This fixes some problems with DHCPd and anything else that uses a SOCK_PACKET socket. Default setting is off, which works for every other protocol I know about, and is slightly faster.
Enhancements:
- This release fixes return error codes in vconfig.
Download (0.089MB)
Added: 2005-11-14 License: GPL (GNU General Public License) Price:
1558 downloads
camE 1.9
camE is an imlib2 webcam grabber, annotator, and uploader. more>>
camE is a Webcam grabber designed for video4linux devices. It is based on the xawtv webcam app, but extended to use imlib2 for applying antialised, blended truetype fonts to the image before upload.
A large number of new options have been added including scp support (in addition to ftp), image archiving, and much more. It runs as a daemon and needs no X connection to operate.
Main features:
- ttf fonts
- blended transparent text
- title text
- options in ~/.camErc
- message read from separate file (eg echo "eating my dinner" > ~/.caminfo)
- color the text as you like
- text background any color/alpha value
- scp support for uploading
- ftp support for uploading using libcurl, reconnect for each upload or reuse one connection
- proper logging to file
- user defined actions to be run before and after shots, and after upload (use to play sounds, beep, run scripts, copy files, whatever)
- file for stopping uploads temporarily (touch ~/BLOCKCAM to stop shooting, remove it to resume)
- now a proper daemon that can run without X forever if wanted
- control of brightness, contrast, gamma, hue, colour, etc
- control of framerate and use of snapshot mode for Philips cams
- image archiving (timestamped into a directory of your choice after upload), every frame or every n frames
- lag reduction (for some cams, when mmaped, the image grabbed lags behind the cam by up to 20 seconds. I use lag_reduce 5 in my ~/.camErc for example. This takes 5 shots in a row, which clears the mmap buffers, and then keeps the last shot, lag-free)
<<lessA large number of new options have been added including scp support (in addition to ftp), image archiving, and much more. It runs as a daemon and needs no X connection to operate.
Main features:
- ttf fonts
- blended transparent text
- title text
- options in ~/.camErc
- message read from separate file (eg echo "eating my dinner" > ~/.caminfo)
- color the text as you like
- text background any color/alpha value
- scp support for uploading
- ftp support for uploading using libcurl, reconnect for each upload or reuse one connection
- proper logging to file
- user defined actions to be run before and after shots, and after upload (use to play sounds, beep, run scripts, copy files, whatever)
- file for stopping uploads temporarily (touch ~/BLOCKCAM to stop shooting, remove it to resume)
- now a proper daemon that can run without X forever if wanted
- control of brightness, contrast, gamma, hue, colour, etc
- control of framerate and use of snapshot mode for Philips cams
- image archiving (timestamped into a directory of your choice after upload), every frame or every n frames
- lag reduction (for some cams, when mmaped, the image grabbed lags behind the cam by up to 20 seconds. I use lag_reduce 5 in my ~/.camErc for example. This takes 5 shots in a row, which clears the mmap buffers, and then keeps the last shot, lag-free)
Download (0.038MB)
Added: 2005-04-25 License: GPL (GNU General Public License) Price:
1643 downloads
Lyricue 1.9.10
Lyricue is used to edit/display song lyrics on a second screen/projector for use at singing events such as church services. more>>
Lyricue 1.9.10 is an extremely useful utility for everyone. It can be used to edit/display song lyrics on a second screen/projector for use at singing events such as church services.
With Lyricue you are not restricted to setting everything up before the event as you can add, remove and change songs on the fly. You can edit a song while it is up on the screen and quickly show your changes (good for when you notice a misspelling or the singers decide to change the words on you). You can even type up notes directly to the screen or quickly display a bible verse at an instants notice.
Major Features:
- Web interface available
- OpenGL accelerated server using Clutter
- Video backgrounds
- Display over live video
- Runs in English, German, French, Dutch or Swedish
- Networkable (i.e. run interface and server on different machines)
- User access controls
- Multiple Playlists
- Copyright info for songs
- Automatic Page advance
- Duplicate/Delete individual pages in playlist
- Preferences Dialog
- Re-orderable playlist
- Playlist entries to change background
- Can run at configurable resolution
- User-specific configuration/images (or can all refer to global one)
- All songs kept in a database and so screens are dynamically generated, allowing you to easily change the backdrop, font etc without having to change all the songs
- Can automatically create screens for bible verses (KJV included since there are licensing issues with NIV)
- Quick searching for songs
- Playlist shown as collapsible tree so easy to find wanted page
- Can use any image as backdrop (stored in database)
- Can add images to playlist (stored in database)
- Add/Edit/Remove Songs (even while they are being displayed)
- Honourize a song (change 'jesus' to 'Jesus' etc)
- Preview a song as you enter it
- Drag'n'Drop playlist adding
- Searching by song name or the lyrics themselves
- Change Font/Colours of server
- Graphical error reporting
- Spellchecking
Enhancements:
- Drag'n'Drop backgrounds
- First-run wizard to help with initial setup
- Much better automatic handling of multiple monitors
- Preview displays now look/scale better
- Gtk2-Perl 1.020
- MySQL 4.0.12
- Perl 5.8.0
Added: 2009-07-01 License: GPL Price: FREE
15 downloads
Other version of Lyricue
Lyricue is used to edit/display song lyrics on a second screen/projector for use ... Lyricue 1.9.9 is yet another extremely useful tool which can be used to edit/display songPrice: FREE
License:GPL
License:GPL
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above backup32 1.9 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
