Free auto bill of sale form software for linux

Auto Save Document is an extension used to store the currently shown document in a separate directory automatically.

Autosave is a small extension, which can be used to store the currently shown document in a seperate directory automatically when browsing a certain site. You may configure the sites, where all pages will be stored to cache, by adding them to a list. The documents are stored as html-text only (no embedded objects like pictures etc.)

The files are cyclic reused, e.g. if you set the cache size to 100, Autosave will store the document contents to X:/MyCache/Autosave_0.html ... AutoSave_100.html and start again with AutoSave_0.htm when the 101st page is browsed. A small Icon in the statusbar will change its colour each time to indicate a page was written.

If you click this small icon, the current page will be dumped, regardless if the site is in the autosave list or not.

NOTE: this extension is really, really simple! Only plain text is saved, no external .css,.js => the result may look ugly! The one and only intention for this extension is, to save the text for external parsing or similar! Look for Scrapbook etc. in case you want to store more than the plain text!

auto-build is a Perl module that can run automated, unattended software build processes.

SYNOPSIS

# auto-build [OPTION]...
Run build using latest code currently in source control
# auto-build --config /etc/auto-build.d/auto-build.conf
Run build using code committed prior to 12:30 on Dec 12th 2004
# auto-build --timestamp 12:30:00 Dec 12th 2004
--config /etc/auto-build.d/auto-build.conf

SUMMARY

auto-build is the command used to execute the Test-AutoBuild software build automation framework. It is intended to execute a single iteration of the build engine and then quit with its exit status providing an indication of the build success / fail status (see the EXIT STATUS section later in this manual page). To perform a continous automated build this command would be launched on a frequent basis from cron. Locking will ensure that two instances do not execute concurrently, so it can safely be triggered every 5 minutes.

OPTIONS

The following command line options are valid:

--config=FILE

Specify an alternative path to the configuration file for the build process. If ommitted, will default to looking for the file $HOME/auto-build.conf. The configuration data is loaded by the Config::Record module, so refer to that modules manual page for details of permitted syntax. The file will also be pre-processed by the Template module allowing dynamic generation of complex configuration files

--log4perl=FILE

Specify an alternative file containing configuration settings for the Log::Log4perl logging system. If ommitted, log4perl settings will be loaded from the master autobuild configuration file.

--timestamp=DATE

Specify the timestamp to use when checking code out of the source control repositories. For repository modules supporting timestamps it is guarenteed that the code checked out will be the latest version not newer than this timestamp. If ommitted, the timestamp will default to the current timestamp. The argument can be either an plain integer specifying number of seconds since the epoch, or any of the text representations handled by the Date::Manip module

today
1st thursday in June 1992
05/10/93
12:30 Dec 12th 1880
8:00pm december tenth

--verbose

Increase the verbosity of warning messages and errors. This will ensure that if the builder unexpectedly crashes, a complete stack trace will be dumped along will full arguments.It will also cause the post-processed configuration file to be dumped.

--help

Display a summary of the command line help options

Quinti Secure Contact Form is a contact form for Web pages that is not vulnerable to robots who would abuse such forms for sending spam.
It uses both JavaScript field validators and CAPTCHA for verifying the validity of the sender. Quinti Secure Contact Form is easy to install and configure, and uses valid XHTML 1.1.
I have been attacked thousand times by spammers from my contact form, they use robots and take advantage of certain vulnerabilities of the mail forms to send their spam, and fill up my mailbox up to such an extent that they make your mail practically useless.
There are two ways of tackling this problem: Introducing a CAPTCHA validated through JavaScript, as i explain later.
And introducing certain functions in PHP that prevent these attacks, as you will see in the examples below
At the moment, go to the problem.
Main features:
- Invulnerable secure antispam contact form,
- JavaScript field validator in php (to insert multi-language variables and other variables, if you wish)
- Prevent spammers from using your form to send garbage, guaranteed.
- CAPTCHA to avoid Javascript validated Spam
- Easy to install and configure
- Valid XHTML 1.1

NoFuss Sales Tracker is a quote generation and tracking system designed for the general IT retailer.

NoFuss Sales Tracker project can create quotes from an internal price list using drop-down menus and pre-setup machine recipes.

The end product will keep information regarding clients in a database, be able to generate quotes on the fly, generate invoices from quotes, etc.

NoFuss Solutions provides expert IT services to the local community using experience in a variety of computer systems. We support both hardware and software and strive to provide a one-stop service to our customers. Our main target is the home user or small business owner that can not afford dedicated IT personnel but needs the services of a dedicated IT support office.

Apart from the general IT support services (repairs and maintenance) we also offer custom software development utilising the JAVA programming language. NoFuss Invoicing is a free invoicing solution for small businesses and we are currently working on a free point-of-sale application for the same market.

NoFuss Solutions came into existence during 1996 as Horn Labs and along with a shift in focus the beginning of 2005 the name changed to symbolise the new vision and direction of the business. The main aim of NoFuss Solutions shifted from providing services to corporate companies to providing the same services to smaller businesses, especially start-up companies. After restructuring the cost-structure we managed to focus on this relative low-income market and build a stable business on a very unstable market.

At the head of NoFuss Solutions is Ewald Horn, sole proprietor since 1996. Instead of trying to do everything in-house we have identified areas where we can out-source certain functions in order to provide a higher level of service to our customers. This enables us to focus on our strengths while still providing an all-round service to our customers.

Auto Adjust Photos main goal is to set and correct a photo image automatically with only one click. With other words, to make it seen better. This means setting the contrast, color balance and gamma levels of the image by analization.

Not all images are adjusted originally in the proper way. Some of them can be too dark, too bright, or the colors are just too yellowish. The middle tone can be too dark - at this we see the pictures too dark, no matter how many light colors they have. The program tries to set these parameters by analization to the best values.

This can be a solution for those kind of users who are not able to set up and correct images with complicated huge graphical softwares, or just simply dont intend to spend a lot of time with setting the images one-by-one manually. Only selecting the image files are enough, then right-clicking with the mouse you can just start the automatic color correction command from the local menu (one-step operation from a console command too).

The program handles the following image formats: mif, pnm / pgm / ppm, bmp, ras, jp2, jpc, jpg, pgx

This program is FREEWARE - Free software. You are free to use it. You may not rent, lease, sell, modify, decompile or disassemble it without the written permission of the author. The creator of the software will not be liable for any damages or data loss while using it.

The following options are supported:

--help Print this help
-v --version Print version information
-d --description Print more detailed information about the program
-l --licence Print licence agreement
-i --info Information about the image
-a --autoadjust *Auto adjust the colors of the image
-o --overwrite *Overwrite mode, the original source file is replaced
-j1 --jpg JPG image output
-j2 --jp2 JPEG 2000 image output
-r --resize *Resize image with given value taking the longer side
-s --speed Print extra speed information
-q --quality *Set image quality from 1 to 100
-m --mute Muted mode, no information printed during operation

* marked parameters need file input

EXAMPLES:

aaphoto --version
aaphoto --help
aaphoto --description
aaphoto --licence
aaphoto --info image.jpg
aaphoto --autoadjust image.jpg
aaphoto --resize70% image.jpg
aaphoto --resize600 image.jpg
aaphoto --quality80 image.jp2
aaphoto *.jp2 --overwrite --speed

REMARKS:

- auto adjust parameter is set by default if no other parameters are given
- a _new filename will be generated without --overwrite parameter
- on directory input every file will be processed in it but not recursively
- order of parameters does not matter
- resizing can be set in percentage too
- resize parameter should be less or equal than original
- resize uses the best (and slowest) resampling method
- default jpeg compression quality is 95%

Rails Real-Time Form Validation Plug-In uses AJAX to validate form data against a model in real-time. AJAX requests are made as the user is filling in form fields.
The form data is then validated against a model on the server-side. RTV then responds with javascript that dynamically updates the HTML document. This enables you to mark form fields as valid/invalid using CSS.
The download package now includes a sample rails application. It does not need a database to run, thanks to this. Simply execute ./script/server from the rtv_sample_app directory and point your bwoser to http://localhost:3000.
Usage:
Download and extract the contents of the_plugin directory to your vendor/plugins directory. Please the the rtv_sample_app for more details.
In your controller:
include UIEnhancements::RealtimeValidation
helper :RealtimeValidation
realtime_validation_for(:the_form_id, :the_model)
In your view, after a form:
In your CSS (example):
.fieldWithoutErrors,
.fieldWithErrors
{
outline-width: 1px;
outline-color: white;
outline-style: solid;
/* !!HACK!! IE will not use this because it does not understand !important. Border is not needed for firefox, so make it 0px!*/
border-width: 0px !important;
/*for IE!*/
border-width: 1px;
border-color: white;
border-style: solid;
}
.fieldWithErrors
{
background: pink;
background-color:pink;
outline-color: red;
/*for IE!*/
border-color: red;
}
/* Browser support may be limited here...*/
.fieldWithErrors input,
.fieldWithErrors select,
.fieldWithErrors textarea
{
background: pink;
background-color: pink;
}
Known to work with:
- Rails 1.1.6
- FireFox 2
Enhancements:
- This release adds a sample application, some code cleanup and minor bugfixes, and some changes to the sample CSS.