arrows
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 154
arrows 0.6
Iamge in which you find a path through a maze of arrows more>>
Iamge iproject) in which you find a path through a maze of arrows
The goal is to guide the blue spinning thing through a maze of arrows, collecting the green things to score points.
Arrows can be created and destroyed along the way. The player is chased by an enemy sprite which slowly catches up.
<<lessThe goal is to guide the blue spinning thing through a maze of arrows, collecting the green things to score points.
Arrows can be created and destroyed along the way. The player is chased by an enemy sprite which slowly catches up.
Download (0.032MB)
Added: 2006-11-28 License: GPL (GNU General Public License) Price:
1077 downloads
Arrowmatcher 1.4.3
Arrowmatcher is a simple tool for crossbow archers. more>>
Arrowmatcher application is a simple tool for crossbow archers. This ballistic software can calculate the speed, kinetic energy and the trajectory of an arrow (or bullet), and then use these values to calibrate the lead points of a crossbows telescopic sight.
Main features:
- Calculate the velocity and the kinetic energy of the arrow
- Output of the trajectory as a table.
- Output of the devitation of the arrow at a given range.
- Output of the flighttime at a given range.
- Output of the kinetic energy at a given range.
- Support for telescopic sights with more than one crosshair.
- Support for a Rear Sight and a Front Sight.
<<lessMain features:
- Calculate the velocity and the kinetic energy of the arrow
- Output of the trajectory as a table.
- Output of the devitation of the arrow at a given range.
- Output of the flighttime at a given range.
- Output of the kinetic energy at a given range.
- Support for telescopic sights with more than one crosshair.
- Support for a Rear Sight and a Front Sight.
Download (3.1MB)
Added: 2006-06-24 License: GPL (GNU General Public License) Price:
1218 downloads
GIMP arrow and cursor brushes 1.0
GIMP arrow and cursor brushes project consists of 17 sets of arrows and three cursors (a total of 72 brushes) for GIMP. more>>
GIMP arrow and cursor brushes project consists of 17 sets of arrows and three cursors (a total of 72 brushes) to put in your GIMP brushes folder.
Arrow brushes is my small payback for using the great GIMP program.
I had a hard time (actually impossible) finding any arrow brushes for the GIMP.
But .gbr files are easy to make, so I spent two days of my life making these arrows
(and a few "cursors") as my modest contribution.
Use them for anything youd like. If you redistribute them, please include this file.
I post these, and perhaps make updates, at gimphelp.org. All the items will also be included (in png format) at wpclipart.com, the Public Domain clipart site.
<<lessArrow brushes is my small payback for using the great GIMP program.
I had a hard time (actually impossible) finding any arrow brushes for the GIMP.
But .gbr files are easy to make, so I spent two days of my life making these arrows
(and a few "cursors") as my modest contribution.
Use them for anything youd like. If you redistribute them, please include this file.
I post these, and perhaps make updates, at gimphelp.org. All the items will also be included (in png format) at wpclipart.com, the Public Domain clipart site.
Download (0.016MB)
Added: 2006-04-25 License: BSD License Price:
799 downloads
Mapyrus 0.703
Mapyrus is software for creating plots of points, lines, polygons and labels to PostScript. more>>
Mapyrus project can create plots of points, lines, polygons and labels to PostScript (high resolution, up to A0 paper size), Portable Document Format (PDF), Scalable Vector Graphics (SVG) format and web image output formats.
Mapyrus is freely-available and is implemented entirely in Java enabling it to run on Linux, Sun Solaris, MicroSoft Windows and other platforms for which Java is available.
Main features:
- A Logo or turtle graphics program.
- An imaginary pen is moved around a page, creating shapes that are drawn into an image file. Reusable routines are built up using a BASIC-like language. Branching and looping constructs enable complex shapes, symbols and patterns to be be defined.
- Reading and displaying of geographic information system (GIS) datasets, text files, or tables held in a relational database (including spatially extended databases such as PostGIS and MySQL).
- Drawing routines are applied to geographic data to produce annotated and symbolized maps and graphs. Attributes of the geographic data control the color, size, annotation and other characteristics of the appearance of the geographic data. Scalebars, legends, coordinate grids and north arrows are also available.
- Integration with the freely-available Java Topology Suite from Vivid Solutions. This library provides geometric algorithms such as buffering, point-in-polygon test and polygon intersection.
- Integration with the ogrinfo program, part of the freely-available OGR library. This program provides access to many GIS data formats.
- Flexibility. Running in one of two ways.
- As a stand-alone program for integration into scripts and batch tasks (suitable for generating a one-off map or a series of similar maps from a template showing different areas, or using different criteria for each map).
- As a self-contained web server providing map and graph images to a web-based application. This also enables Mapyrus to be integrated into larger applications (such as PHP-based applications), with map images fetched using HTTP requests.
Enhancements:
- Upgrade to Java version 1.5.
- Enable shell environment variables to be used directly in Mapyrus.
- Fix reading of ESRI Shape files to correctly read zero width attribute fields, files containing only a single point, and MULTIPOINT geometry having only one point.
<<lessMapyrus is freely-available and is implemented entirely in Java enabling it to run on Linux, Sun Solaris, MicroSoft Windows and other platforms for which Java is available.
Main features:
- A Logo or turtle graphics program.
- An imaginary pen is moved around a page, creating shapes that are drawn into an image file. Reusable routines are built up using a BASIC-like language. Branching and looping constructs enable complex shapes, symbols and patterns to be be defined.
- Reading and displaying of geographic information system (GIS) datasets, text files, or tables held in a relational database (including spatially extended databases such as PostGIS and MySQL).
- Drawing routines are applied to geographic data to produce annotated and symbolized maps and graphs. Attributes of the geographic data control the color, size, annotation and other characteristics of the appearance of the geographic data. Scalebars, legends, coordinate grids and north arrows are also available.
- Integration with the freely-available Java Topology Suite from Vivid Solutions. This library provides geometric algorithms such as buffering, point-in-polygon test and polygon intersection.
- Integration with the ogrinfo program, part of the freely-available OGR library. This program provides access to many GIS data formats.
- Flexibility. Running in one of two ways.
- As a stand-alone program for integration into scripts and batch tasks (suitable for generating a one-off map or a series of similar maps from a template showing different areas, or using different criteria for each map).
- As a self-contained web server providing map and graph images to a web-based application. This also enables Mapyrus to be integrated into larger applications (such as PHP-based applications), with map images fetched using HTTP requests.
Enhancements:
- Upgrade to Java version 1.5.
- Enable shell environment variables to be used directly in Mapyrus.
- Fix reading of ESRI Shape files to correctly read zero width attribute fields, files containing only a single point, and MULTIPOINT geometry having only one point.
Download (1.5MB)
Added: 2007-06-25 License: LGPL (GNU Lesser General Public License) Price:
854 downloads
Aardvark Topsites PHP 5.2.0
Aardvark Topsites PHP is the premier PHP/SQL topsites script. more>>
Aardvark Topsites PHP is simply the best topsites script available. Aardvark Topsites PHP project is licensed under the GNU General Public License so it will always remain completely free.
Main features:
- Members ranks can be shown on their button.
- New: Stat Buttons, allowing you to customize your buttons and display all kinds of stats on them
- 6 different ranking methods
- Counts unique pageviews, total pageviews, unique hits in, total hits in, unique hits out, and total hits out
- New: Rank daily, weekly, or monthly
- Up/down/neutral arrows
- Customizable categories
- Fully customizeable skins: make your topsites look however you want!
- Simple web-based installer and upgrader
- Multiple pages
- Member login and lost password retrieval
- Seamlessly switches between languages
- Fast, integrated search
- Ad breaks
- Visitors can rate and review members
- Advanced stats and graphs
- Easy to install and maintain
- Powerful admin
- New: Mass mail members
- Best of all, its completely free!
Enhancements:
- A tool to backup database was added in the admin interface.
- A more secure captcha, with a link for users to get a new captcha if the user cant read the first one.
- The gateway page for the Fusion skin was redesigned.
- Sites may be banned by URL, IP address, username, or email address.
- An optional security question is asked on join to block spammers.
- By default, new members must be approved by the admin before they are listed, and changes to the title or URL of a site must be approved by the admin.
- A summary of overall statistics is displayed on the main page.
<<lessMain features:
- Members ranks can be shown on their button.
- New: Stat Buttons, allowing you to customize your buttons and display all kinds of stats on them
- 6 different ranking methods
- Counts unique pageviews, total pageviews, unique hits in, total hits in, unique hits out, and total hits out
- New: Rank daily, weekly, or monthly
- Up/down/neutral arrows
- Customizable categories
- Fully customizeable skins: make your topsites look however you want!
- Simple web-based installer and upgrader
- Multiple pages
- Member login and lost password retrieval
- Seamlessly switches between languages
- Fast, integrated search
- Ad breaks
- Visitors can rate and review members
- Advanced stats and graphs
- Easy to install and maintain
- Powerful admin
- New: Mass mail members
- Best of all, its completely free!
Enhancements:
- A tool to backup database was added in the admin interface.
- A more secure captcha, with a link for users to get a new captcha if the user cant read the first one.
- The gateway page for the Fusion skin was redesigned.
- Sites may be banned by URL, IP address, username, or email address.
- An optional security question is asked on join to block spammers.
- By default, new members must be approved by the admin before they are listed, and changes to the title or URL of a site must be approved by the admin.
- A summary of overall statistics is displayed on the main page.
Download (0.16MB)
Added: 2007-06-10 License: GPL (GNU General Public License) Price:
869 downloads
ParaView 2.6.0
ParaView project is an application designed with the need to visualize large data sets in mind. more>>
ParaView project is an application designed with the need to visualize large data sets in mind. The goals of the ParaView project include the following:
- Develop an open-source, multi-platform visualization application.
- Support distributed computation models to process large data sets.
- Create an open, flexible, and intuitive user interface.
- Develop an extensible architecture based on open standards.
ParaView runs on distributed and shared memory parallel as well as single processor systems and has been succesfully tested on Windows, Linux and various Unix workstations and clusters. Under the hood, ParaView uses the Visualization Toolkit as the data processing and rendering engine and has a user interface written using a unique blend of Tcl/Tk and C++. Please go here for a detailed list of features.
ParaView was created by Kitware in conjunction with Jim Ahrens of the Advanced Computing Laboratory at Los Alamos National Laboratory (LANL). Contributors and developers of ParaView currently include: Kitware, LANL, Sandia National Laboratories, and Army Research Laboratory. ParaView is funded by the US Department of Energy ASCI Views program as part of a three-year contract awarded to Kitware, Inc. by a consortium of three National Labs - Los Alamos, Sandia, and Livermore. The goal of the project is to develop scalable parallel processing tools with an emphasis on distributed memory implementations. The project includes parallel algorithms, infrastructure, I/O, support, and display devices. One significant feature of the contract is that all software developed is to be delivered open source. Hence ParaView is available as an open-source system.
Main features:
- Handles structured (uniform rectilinear, non-uniform rectilinear, and curvilinear grids), unstructured, polygonal and image data.
- All processing operations (filters) produce datasets. This allows the user to either further process or save as a data file the result of every operation. For example, the user can extract a cut surface, reduce the number of points on this surface by masking, and apply glyphs (for example, vector arrows) to the result.
- Contours and isosurfaces can be extracted from all data types using scalars or vector components. The results can be colored by any other variable or processed further. When possible, structured data contours/isosurfaces are extracted with fast and efficient algorithms which make use of the special data layout.
- Vectors fields can be inspected by applying glyphs (arrows, cones, lines, spheres, and various 2D glyphs) to the points in a dataset. The glyphs can be scaled by scalars, vector component or vector magnitude and can be oriented using a vector field.
- A sub-region of a dataset can be extracted by cutting or clipping with an arbitrary plane (all data types), specifying a threshold criteria to exclude cells (all data types) and/or specifying a VOI (volume of interest - structured data types only)
- Streamlines can be generated using constant step or adaptive integrators. The results can be displayed as points, lines, tubes, ribbons, etc., and can be processed by a multitude of filters.
- The points in a dataset can be warped (displaced) with scalars (given a user defined displacement vector) or with vectors (unavailable for non-linear rectilinear grids).
- With the array calculator, new variables can be computed using existing point or cell field arrays. A multitude of scalar and vector operations are supported.
- Data can be probed at a point or along a line. The results are displayed either graphically or as text and can be exported for further analysis.
- ParaView provides many other data sources and filters by default (edge extraction, surface extraction, reflection, decimation, extrusion, smoothing...) and any VTK filter can be added by providing a simple XML description (VTK provides hundreds of sources and filters, see VTK documentation for a complete list).
Enhancements:
- This release adds parallel uniform rectilinear grid volume rendering (vtkImageData).
- It introduces new algorithms for parallel unstructured grid volume rendering.
- Support for hardware accelerated offscreen rendering using OpenGL framebuffers.
- Improved multi-block support.
- Improved AMR support.
- Animation saving with ffmpeg.
- Filters have been added for FLUENT, OpenFOAM, MFIX, LSDyna, and AcuSolve.
- A gradient filter for unstructured data.
- Many other enhancements and bugfixes.
<<less- Develop an open-source, multi-platform visualization application.
- Support distributed computation models to process large data sets.
- Create an open, flexible, and intuitive user interface.
- Develop an extensible architecture based on open standards.
ParaView runs on distributed and shared memory parallel as well as single processor systems and has been succesfully tested on Windows, Linux and various Unix workstations and clusters. Under the hood, ParaView uses the Visualization Toolkit as the data processing and rendering engine and has a user interface written using a unique blend of Tcl/Tk and C++. Please go here for a detailed list of features.
ParaView was created by Kitware in conjunction with Jim Ahrens of the Advanced Computing Laboratory at Los Alamos National Laboratory (LANL). Contributors and developers of ParaView currently include: Kitware, LANL, Sandia National Laboratories, and Army Research Laboratory. ParaView is funded by the US Department of Energy ASCI Views program as part of a three-year contract awarded to Kitware, Inc. by a consortium of three National Labs - Los Alamos, Sandia, and Livermore. The goal of the project is to develop scalable parallel processing tools with an emphasis on distributed memory implementations. The project includes parallel algorithms, infrastructure, I/O, support, and display devices. One significant feature of the contract is that all software developed is to be delivered open source. Hence ParaView is available as an open-source system.
Main features:
- Handles structured (uniform rectilinear, non-uniform rectilinear, and curvilinear grids), unstructured, polygonal and image data.
- All processing operations (filters) produce datasets. This allows the user to either further process or save as a data file the result of every operation. For example, the user can extract a cut surface, reduce the number of points on this surface by masking, and apply glyphs (for example, vector arrows) to the result.
- Contours and isosurfaces can be extracted from all data types using scalars or vector components. The results can be colored by any other variable or processed further. When possible, structured data contours/isosurfaces are extracted with fast and efficient algorithms which make use of the special data layout.
- Vectors fields can be inspected by applying glyphs (arrows, cones, lines, spheres, and various 2D glyphs) to the points in a dataset. The glyphs can be scaled by scalars, vector component or vector magnitude and can be oriented using a vector field.
- A sub-region of a dataset can be extracted by cutting or clipping with an arbitrary plane (all data types), specifying a threshold criteria to exclude cells (all data types) and/or specifying a VOI (volume of interest - structured data types only)
- Streamlines can be generated using constant step or adaptive integrators. The results can be displayed as points, lines, tubes, ribbons, etc., and can be processed by a multitude of filters.
- The points in a dataset can be warped (displaced) with scalars (given a user defined displacement vector) or with vectors (unavailable for non-linear rectilinear grids).
- With the array calculator, new variables can be computed using existing point or cell field arrays. A multitude of scalar and vector operations are supported.
- Data can be probed at a point or along a line. The results are displayed either graphically or as text and can be exported for further analysis.
- ParaView provides many other data sources and filters by default (edge extraction, surface extraction, reflection, decimation, extrusion, smoothing...) and any VTK filter can be added by providing a simple XML description (VTK provides hundreds of sources and filters, see VTK documentation for a complete list).
Enhancements:
- This release adds parallel uniform rectilinear grid volume rendering (vtkImageData).
- It introduces new algorithms for parallel unstructured grid volume rendering.
- Support for hardware accelerated offscreen rendering using OpenGL framebuffers.
- Improved multi-block support.
- Improved AMR support.
- Animation saving with ffmpeg.
- Filters have been added for FLUENT, OpenFOAM, MFIX, LSDyna, and AcuSolve.
- A gradient filter for unstructured data.
- Many other enhancements and bugfixes.
Download (29.3MB)
Added: 2007-03-19 License: GPL (GNU General Public License) Price:
958 downloads
Righteous! 0.6
Righteous is a puzzle game inspired by a popular handheld console game but with many enhancements planned. more>>
Righteous is a puzzle game inspired by a popular handheld console game but with many enhancements planned. Righteous!s goal is to build up combos by combining blocks of similar colors.
These combine into squares which are cleared away by a moving time marker. If the blocks are unable to land within the game grid then the game is over.
Controls:
Left/Right arrow - move, adjust time limit in menu
Up/Down arrow - rotate blocks, change selection in menu
Spacebar - fall quickly
F - fullscreen
M - enable/disable background music
ESC - quit to the menu
Return - pause/unpause the game, make selection in menu
Control/Alt keys - enable rapid movement
<<lessThese combine into squares which are cleared away by a moving time marker. If the blocks are unable to land within the game grid then the game is over.
Controls:
Left/Right arrow - move, adjust time limit in menu
Up/Down arrow - rotate blocks, change selection in menu
Spacebar - fall quickly
F - fullscreen
M - enable/disable background music
ESC - quit to the menu
Return - pause/unpause the game, make selection in menu
Control/Alt keys - enable rapid movement
Download (0.25MB)
Added: 2006-06-26 License: GPL (GNU General Public License) Price:
1215 downloads
Crossfire TRT 2.1
Crossfire TRT project is an advancement of the crossfire multi-user RPG game. more>>
Crossfire TRT project is an advancement of the crossfire multi-user RPG game. Unlike the original project, it focuses mainly on stability and playability, but also adds modern technology such as map scripting, Perl server extensions, asynchronous I/O, higher resolution graphics, and better client support.
Main features:
- Death is not permanent, and you can get back all lost stats and experience by playing a game in a special place named Nimbus. You are teleported there when you die and you have to play a game (currently minesweeper) to get out.
- Friendly fire is disabled and playerkilling is also modified. You can only kill another player when you and the other player are hostile. To become hostile, you have to visit the church of Gorokh in Scorn and talk to the priest. To become peaceful again, visit the curch of Valriel and talk to its priest.
- Invitation of other players to where you are is possible with the invite command. You have to solve the invitor quest (see below in maps) to be able to use the command.
- You can follow other players with the follow command when you stand next to the player you want to follow.
- Pet monsters and summoned creatures will not stand in the way of other party members, making it bearable to play with summoning skills in a party.
- Map and graphics artists are working on improved graphics and new maps and quests.
- A new currency: the Royalty. Its worth 100 Platinum and is made of paper. (The bank script was completly rewritten in Perl)
- The communication commands have been rewritten in Perl and an ignore command was added.
- Trade shops have been implemented in Perl, which allows the player to trade items when they are offline.
- Big 64x64 faces and tiles have been introduced, which have a higher detail level than the old 32x32 tiles, and can be used with the CFPlus client.
Enhancements:
- optimised event invocation (non-wanted events can now be skipped with 4-5 inlined instructions).
- complete rewrite of town_portal: it now creates a portal to the "nearest" town only, travel is only possible to the town and back, anybody can use it (also removes one of the remaining syncpoints in the server).
- complete rewrite of the range/attack skill slot system: there are now two slots, one for combat, one for ranged attacks.
- introduce the concept of a current weapon (either a ranged or a combat weapon/skill/tool) and switch between them as needed.
- rewrite bow code so bows get more useful: apply damage, attacktype and other stats to the arrows and treat bows as weapons. also rebalance the missile weapons skill so its damage increases with level.
- rewrite the complete player speed logic: weapon_speed now works as documented and there are no unnatural speed boosts.
- implement a utility - cfutil - that simplifies arch and map installation, replacing the old collect scripts and simplying deployment by scaling and cutting faces as required.
- simplify the map protocol extensively by taking advantage of missing bigfaces, speeding up map generation immensely.
- implement inherit keyword allowing archetypes to inherit from other archetypes.
- rationalise archetype, region and treasurelist file format into a single file format and make them reloadable asynchronously.
- make the worldmap, facedata (smoothing, faces, magicmap) reloadable at runtime.
- implement 64x64 faceset support.
- implement fxixsx protocol that saves a lot of bandwidth over the old image/face/smooth packets and allows images > packetsize, incremental and background transfers.
- implement a bandwidth-saving smoothing protocol that works on a face basis as opposed to a mapspace basis.
- the server can now rate-limit image uploads to not exceed a certain (client-configurable) speed while guarenteeing full freedom of movement.
- implement new ex command to request item descriptions.
- implement new msg command for in-game messages with meta information (using xml).
- enforce utf-8 for all text messages.
- added micropather (not used yet).
- many, many bugfixes.
<<lessMain features:
- Death is not permanent, and you can get back all lost stats and experience by playing a game in a special place named Nimbus. You are teleported there when you die and you have to play a game (currently minesweeper) to get out.
- Friendly fire is disabled and playerkilling is also modified. You can only kill another player when you and the other player are hostile. To become hostile, you have to visit the church of Gorokh in Scorn and talk to the priest. To become peaceful again, visit the curch of Valriel and talk to its priest.
- Invitation of other players to where you are is possible with the invite command. You have to solve the invitor quest (see below in maps) to be able to use the command.
- You can follow other players with the follow command when you stand next to the player you want to follow.
- Pet monsters and summoned creatures will not stand in the way of other party members, making it bearable to play with summoning skills in a party.
- Map and graphics artists are working on improved graphics and new maps and quests.
- A new currency: the Royalty. Its worth 100 Platinum and is made of paper. (The bank script was completly rewritten in Perl)
- The communication commands have been rewritten in Perl and an ignore command was added.
- Trade shops have been implemented in Perl, which allows the player to trade items when they are offline.
- Big 64x64 faces and tiles have been introduced, which have a higher detail level than the old 32x32 tiles, and can be used with the CFPlus client.
Enhancements:
- optimised event invocation (non-wanted events can now be skipped with 4-5 inlined instructions).
- complete rewrite of town_portal: it now creates a portal to the "nearest" town only, travel is only possible to the town and back, anybody can use it (also removes one of the remaining syncpoints in the server).
- complete rewrite of the range/attack skill slot system: there are now two slots, one for combat, one for ranged attacks.
- introduce the concept of a current weapon (either a ranged or a combat weapon/skill/tool) and switch between them as needed.
- rewrite bow code so bows get more useful: apply damage, attacktype and other stats to the arrows and treat bows as weapons. also rebalance the missile weapons skill so its damage increases with level.
- rewrite the complete player speed logic: weapon_speed now works as documented and there are no unnatural speed boosts.
- implement a utility - cfutil - that simplifies arch and map installation, replacing the old collect scripts and simplying deployment by scaling and cutting faces as required.
- simplify the map protocol extensively by taking advantage of missing bigfaces, speeding up map generation immensely.
- implement inherit keyword allowing archetypes to inherit from other archetypes.
- rationalise archetype, region and treasurelist file format into a single file format and make them reloadable asynchronously.
- make the worldmap, facedata (smoothing, faces, magicmap) reloadable at runtime.
- implement 64x64 faceset support.
- implement fxixsx protocol that saves a lot of bandwidth over the old image/face/smooth packets and allows images > packetsize, incremental and background transfers.
- implement a bandwidth-saving smoothing protocol that works on a face basis as opposed to a mapspace basis.
- the server can now rate-limit image uploads to not exceed a certain (client-configurable) speed while guarenteeing full freedom of movement.
- implement new ex command to request item descriptions.
- implement new msg command for in-game messages with meta information (using xml).
- enforce utf-8 for all text messages.
- added micropather (not used yet).
- many, many bugfixes.
Download (14.2MB)
Added: 2007-05-31 License: GPL (GNU General Public License) Price:
878 downloads
Bookmarks Scrollbar 1.0.5
Bookmarks Scrollbar is an extension which adds a scrollbar to the bookmarks menu. more>>
Bookmarks Scrollbar is an extension which adds a scrollbar to the bookmarks menu.
A scrollbar is a graphical widget in a GUI with which continuous text, pictures or anything else can be scrolled including time in video applications, i.e., viewed even if it does not fit into the space in a computer display, window, or viewport.
Usually designed as a long rectangular area on one or two sides of the viewing area, containing a bar (or thumb) that can be dragged along a trough to move the body of the document as well as two arrows on either end for precise adjustments. The "thumb" has different names in different environments: on the Macintosh it is called a "thumb" on the Java platform it is called "thumb" or "knob"; Microsofts .NET documentation refers to it as "scroll box" or "scroll thumb"; in other environments it is called "elevator", "puck" or "wiper". Additional functions may be found, such as zooming in/out or various application-specific tools.
The thumb can also sometimes be adjusted by dragging its ends. In this case it would adjust both the position and the zooming of the document, where the size of the thumb represents the degree of zooming applied. A thumb that completely fills the trough, or "track" represents viewing the entire document, at which point the scrollbar may temporarily become hidden.
<<lessA scrollbar is a graphical widget in a GUI with which continuous text, pictures or anything else can be scrolled including time in video applications, i.e., viewed even if it does not fit into the space in a computer display, window, or viewport.
Usually designed as a long rectangular area on one or two sides of the viewing area, containing a bar (or thumb) that can be dragged along a trough to move the body of the document as well as two arrows on either end for precise adjustments. The "thumb" has different names in different environments: on the Macintosh it is called a "thumb" on the Java platform it is called "thumb" or "knob"; Microsofts .NET documentation refers to it as "scroll box" or "scroll thumb"; in other environments it is called "elevator", "puck" or "wiper". Additional functions may be found, such as zooming in/out or various application-specific tools.
The thumb can also sometimes be adjusted by dragging its ends. In this case it would adjust both the position and the zooming of the document, where the size of the thumb represents the degree of zooming applied. A thumb that completely fills the trough, or "track" represents viewing the entire document, at which point the scrollbar may temporarily become hidden.
Download (0.001MB)
Added: 2007-04-11 License: MPL (Mozilla Public License) Price:
931 downloads
prerex 3.9
prerex project is an interactive (command-line) editor and a LaTeX macro support package. more>>
prerex project is an interactive (command-line) editor and a LaTeX macro support package that can be used to create very attractive and readable prerequisite charts.
A prerequisite chart is a network of course boxes linked by prerequisite and co-requisite arrows.
Enhancements:
- The patch for kpdf has been modified so that correct chart coordinates are returned when the document display is smaller than the kpdf window.
<<lessA prerequisite chart is a network of course boxes linked by prerequisite and co-requisite arrows.
Enhancements:
- The patch for kpdf has been modified so that correct chart coordinates are returned when the document display is smaller than the kpdf window.
Download (0.093MB)
Added: 2007-07-11 License: GPL (GNU General Public License) Price:
835 downloads
Dangerous Snowboarding 2.0
Dangerous Snowboarding is a game where you must run humans and bears with your snowboard down. more>>
Dangerous Snowboarding is a game where you must run humans and bears with your snowboard down.
This game was made for a programmers-contest (got the 3rd place).
Control the snowboarder with your arrow keys. Jumping on objects in row will give you a combination-bonus.
Objects:
- Human - You can run it down however you want to.
- Bear - Jump on it.
- Tree - Absolute deadly.
<<lessThis game was made for a programmers-contest (got the 3rd place).
Control the snowboarder with your arrow keys. Jumping on objects in row will give you a combination-bonus.
Objects:
- Human - You can run it down however you want to.
- Bear - Jump on it.
- Tree - Absolute deadly.
Download (0.42MB)
Added: 2007-05-21 License: GPL (GNU General Public License) Price:
896 downloads
Last.sk 0.3
Last.sk is a SuperKaramba theme which shows last.fm user info. more>>
Data is fetched from audioscrobbler web services. In this version it shows nine views: top artists, top tracks, top albums, systems recomendations and recent tracks, etc. Data is updated every five minutes or clicking on refresh button.
Use: First write your last.fm user name on the input box and click the apply button. After a moment, use arrows button for select the view.
<<lessUse: First write your last.fm user name on the input box and click the apply button. After a moment, use arrows button for select the view.
Download (0.053MB)
Added: 2007-04-04 License: GPL (GNU General Public License) Price:
934 downloads
Astaro Security Linux 7.5 Beta
Astaro Security Linux is an award-winning, unique network security solution in an integrated and easy-to-use and manage package. more>>
Astaro Security Linux 7.5 Beta offers you a wonderful and extremely useful product which is an award-winning, unique network security solution in an integrated and easy-to-use and manage package. Astaro Security Linux includes a combination of the following security applications:
- A Firewall with stateful packet inspection and application proxies guards Internet communications traffic in and out of the organization.
- A Virtual Private Network (VPN) gateway assures secure communications with remote offices, road warriors, and telecommuters.
- Anti-Virus defends computers from both email and web-bourne viruses.
- Intrusion Protection detects and stops hostile probes and application-based attacks.
- Spam Filtering eliminates the productivity drain of opening and deleting unsolicited emails.
- Surf Protection (Content Filtering) and Spyware Protection improve productivity by blocking inappropriate web activities, provide full protection from user tracking threats and violation of privacy.
Major Features:
- Protects all types of networks Windows, Linux, Unix and others.
- Delivers comprehensive features at low cost maximizing your ROI (return on investment).
- Highly effective. Has won numerous industry awards. Beat Cisco and Checkpoint in InfoWorld magazine product review, Beat IBM and Computer Associates in Linux World for Best Security Application.
- Integrated management platform features an intuitive browser-based interface and one-step updates for rapid deployment and easy management.
- Can be installed in under 15 minutes or purchased pre-installed on security appliances.
- Can start with firewall, VPN and spam protection and add other security applications as needed, seamlessly.
- Runs as a dedicated application server on top of a hardened operating system, which relieves operating system management headaches.
- Runs on systems ranging from small devices up to large multi-processor systems utilizing gigabytes of memory.
- Redundant systems can be configured to provide high availability and automatic failover in case of hardware or network failures.
- Load balancing improves performance - traffic shaping can set priorities by network, service and protocol.
- Logging, automatic backup, and diagnostic tools support high reliability.
- Free online evaluation workshop to get you started.
Enhancements:
- Major New Things:
- Intrusion Protection Performance
- Uses new version of the IPS engine
- Scales massively when used with Multi-Core CPU/Appliances
- Real-Time Bandwidth Monitor
- New Interface utilization bars on Dashboard (setup scale via QOS)
- Click for detailed overview as to "whats happening in my network right now"
- Import/Export Widget
- Gives the ability to work with manual lists for many features/fields
- Useful to import a large blacklist (for example) into the URL Blacklist
- Can been seen in many user-input boxes in Web, Mail and more. (Green Up/Down Arrows)
- Clone Objects
- Easily duplicate existing objects for quick re-use.
- Supported in most places for many objects (Definitions, Services, Certain Profiles/Actions)
- Extended Network Security Reporting
- Added Detailed Packet Filter/Firewall Reports
- Added Detailed IM/P2P Reports
- Reputation Support for Web Security
- Allows use of the trustedsource.org reputation for Web Filtering
- Documentation coming, for now visit their site/FAQ for more info on reputations
- DHCP Improvements
- Automatically map a current lease to a static assignment
- Limit DHCP leases to those with static assignments only
- Configurable DHCP lease time
- Servers retain configuration when enabled/disabled
- Multicast Routing Daemon
- PIM-SM Routing support
- More documentation on this implementation to come. Experiment with it and if it solves your needs.
- Other New Things:
- Windows SSL VPN Upgraded - New Client which supports X64 and many other options (download again via the UserPortal)
- Improved HTTP Caching - Increases hit/usage rates and makes the cache more effective.
- Quarantine/UserPortal Usability - Adds navigation to the bottom (supplementing the existing controls at the top), large amounts (250-1000) of displayed items per page, and sorting by subject line.
- Default Definition for "Internet" - Allows to specify "Internet" as an object which will exclude internal network(s) to aid policy creation (0.0.0.0/0 on Gateway interface)
- Customizable Shortcuts - Change the default Ctrl assignments to fit your preference
- Improved Definition/Services Sidebar - Mouseover now instantly shows full name and extended info to aid identifying desired object for drag n drop.
- User List shows static IPs - if assigned/configured (no need to edit in order to view)
- Live Log Negation - use to filter live logs to not show lines that match "-" entries i.e. -test to remove lines containing "test"
- Console/SSH Logins Trigger a notification - provides admin the needed insight when accessed.
- Instant Email Backup - Button for every created backup file which allows it to be sent immediately via email to configured addresses
- Custom text for notifications - Allows easier identification of which installation is sending the message. Especially useful if managing multiple sites using notifiers.
- Test NTP Sync - Button to immediately poll the configured NTP server
- Automatic Backup before Up2Date install
- Configurable Default for Lists - Allows for the amount of items per page (Packet Filter Rules, or anywhere there is a number amounts drop down) to have a larger default view
- Cluster/HA Serial Number View - Information on connected units made easier
- Schedule Firmware Installation - When an Up2Date for Firmware is available, you can schedule it to auto-install at a certain time (not a recurring setting)
- WebAdmin Network Section Split - Now two sections; "Network" and "Network Services" for usability.
- Search Boxes Retain Data - No need to re-enter query when returning from a drill down/result click.
- System Restart Reason - Allows logging of "why was system restarted" in the notification
- Group Tool tips for Members - Easily discern Network/Service Group members without having to edit in order to view
- Reporting Exclusions - Used to remove unwanted entries from various reports (such as Google-analytics from Web Security tables
- Log Flag for NAT Rules - Similar to packet filter, tells you which NAT rule was matched as part of traffic handling
- Masquerading for Additional IP Addresses - Allows the use of Masquerading (vs. just SNAT) for additional IPs bound to an interface
- Support for Multiple Authentication Servers - The authentication server section has been redesigned to support fallback/failover in an easier format, with many usability improvements
- SNMP MIB - Downloadable via the SNMP section of WebAdmin
- Up2date Status Reworked - Clarifies the current status of a Firmware Up2date to avoid confusion regarding the availability, download progress etc...of an issued Up2date.
- Inline/Snap Report Links - Directly moves the Admin to the relevant details report when browsing the embedded daily reports located throughout WebAdmin
- Global POP3 Sender Blacklist - Quarantined as "other" in the QM/EUP
- Dashboard RSS Feed - Provides visibility to select Astaro-issued items via WebAdmin
- Other magic features, enhancements, and usability improvements
Added: 2009-05-30 License: Free for non-commerc... Price: USD290.00
13 downloads
PloneArticle 4.0.0-rc2
PloneArticle provides a Plone content type to store elaborate content. more>>
PloneArticle provides a Plone content type to store elaborate content.
PloneArticle : A Plone Document that can incorporate images and attachments and that allows you to choose from different layout models.
Behaves mostly like the standard Plone Document type. When you add a Plone Article, you can enter the name, title, description and text information.
When you look at the Plone Article, the images will appear in the right column as a thumbnail and optionally with their title. When you click on the thumbnail, a popup window will appear with the image at its actual size. Attachments will be listed below the article for download in rows of three.
You will notice two tabs that dont exist on the standard Plone Document: images and attachments.
Images Tab:
This interface shows the Images that you have uploaded to the article, and allows you to add new images as well as deleting them. Images can have an optional title. The position of images as they will appear in the right column of the Plone Article View can be changed with up and down arrows that allow you to individually move images up or down one step.
Attachments Tab:
This interface shows the Attachments that you have uploaded to the article, and allows you to add new attachments as well as deleting them. If no title is given, the name of the uploaded file is taken in its place.
Links Tab:
This interface shows the Links that you have added to the article, and allows you to add new links as well as deleting them.
The Models Tab:
Here you can choose from the stock layout models that come with PloneArticle, and also the models that you have created somewhere in the skins path.
Enhancements:
- Fix reindexation bug after migration from Plone 2.0.5 and Zope 2.7
- Add brazilian and slovenian translation
- Fix some docs
<<lessPloneArticle : A Plone Document that can incorporate images and attachments and that allows you to choose from different layout models.
Behaves mostly like the standard Plone Document type. When you add a Plone Article, you can enter the name, title, description and text information.
When you look at the Plone Article, the images will appear in the right column as a thumbnail and optionally with their title. When you click on the thumbnail, a popup window will appear with the image at its actual size. Attachments will be listed below the article for download in rows of three.
You will notice two tabs that dont exist on the standard Plone Document: images and attachments.
Images Tab:
This interface shows the Images that you have uploaded to the article, and allows you to add new images as well as deleting them. Images can have an optional title. The position of images as they will appear in the right column of the Plone Article View can be changed with up and down arrows that allow you to individually move images up or down one step.
Attachments Tab:
This interface shows the Attachments that you have uploaded to the article, and allows you to add new attachments as well as deleting them. If no title is given, the name of the uploaded file is taken in its place.
Links Tab:
This interface shows the Links that you have added to the article, and allows you to add new links as well as deleting them.
The Models Tab:
Here you can choose from the stock layout models that come with PloneArticle, and also the models that you have created somewhere in the skins path.
Enhancements:
- Fix reindexation bug after migration from Plone 2.0.5 and Zope 2.7
- Add brazilian and slovenian translation
- Fix some docs
Download (1.6MB)
Added: 2007-03-10 License: GPL (GNU General Public License) Price:
958 downloads
Fid Emacs 0.2
Fid Emacs is an Emacs-like text editor integrated with the Frigand Imperial Desktop. more>>
Fid Emacs project is an Emacs-like text editor integrated with the Frigand Imperial Desktop.
It uses Fids mechanisms for buffers, windows, frames, customization, and extensibility.
Enhancements:
- Retain compatibility with fid-core 0.2.1, fid-graphics 0.1.3
- Function key support
We now support the following keys:
- Up arrow
- Down arrow
- Right arrow
- Left arrow
- Backspace
- Delete
- Page up
- Page down
- Home
- End
<<lessIt uses Fids mechanisms for buffers, windows, frames, customization, and extensibility.
Enhancements:
- Retain compatibility with fid-core 0.2.1, fid-graphics 0.1.3
- Function key support
We now support the following keys:
- Up arrow
- Down arrow
- Right arrow
- Left arrow
- Backspace
- Delete
- Page up
- Page down
- Home
- End
Download (0.040MB)
Added: 2006-09-22 License: Other/Proprietary License Price:
1127 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above arrows search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
