Free aim express software for linux

VBA Express is a frontend for the very popular game emulator VisualBoyAdvance.

Whats VBA Express? Its First, to configure VisualBoyAdvance (emulator)... EASILY! Graphics, sound, controls (keyboard and joystick), paths (to saves and captures)... You can configure all this without edit VisualBoyAdvance.cfg manually!

Open your Roms (games) with the frontend! You can run the roms with "Play!" button (without using the console command VisualBoyAdvance game.rom).

DVD BacKup Express is a small Kommander Script to create a GUI for dvdbackup.

I made it because it can be run on any platform with kommander installed and dvdbackup available (which may be more platforms than kdvdbackup or other binary frontends are available for)

There is a lot of room for improvement here. Feel free to spruce it up a bit and send me the new .kmdr file and i will update this.

SIP Express Router (ser) is a high-performance, configurable, free SIP ( RFC3261 ) server .
SER features an application-server interface, presence support, SMS gateway, SIMPLE2Jabber gateway, RADIUS/syslog accounting and authorization, server status monitoring, FCP security, etc. Web-based user provisioning, serweb, available.
Its performance allows it to deal with operational burdens, such as broken network components, attacks, power-up reboots and rapidly growing user population.
SERs configuration ability meets needs of a whole range of scenarios including small-office use, enterprise PBX replacements and carrier services.
Main features:
- accounting
- digest authentication
- CPL scripts
- ENUM support
- instant messaging
- MySQL support
- PostgreSQL support
- a presence agent
- Radius authentication and accounting
- Diameter authentication
- record routing
- SMS gateway
- Jabber gateway
- NAT traversal support transaction module
- registrar
- user location
SER has been extensively and successfuly tested with many SIP products from other vendors (Microsoft, Cisco, Mitel, snom, Pingtel, Siemens, and many others). It has been powering our SIP services continuously for more than two years.

"You don`t have to be an America Online member to experience the immediate cross-Internet communication made possible by AOL Instant Messenger.
This program allows Internet users to communicate via private, personalized text messages.
The program indicates when friends, family members, and business colleagues are online, making Internet communications faster, easier, and more efficient.
AOL Instant Messenger combines AOL`s popular Buddy List and Instant Message features, enabling users to send and respond to messages immediately."
Enhancements:
- Improved Popups Preferences
- Support for @mac.com addresses
- The wireless icon is the visual indication on the buddy list that a buddy is using a mobile device.
- File Transfer (with Drag&Drop support)
- Displays idle time
- Ability to install anywhere. (Extract everything into a single directory and then run aim with option "--install_dir %path" where %path is the path to directory containing all the libraries)

ptyaim is a very simple, extra special curses client for AOLs Instant Messenger (AIM) and ICQ services, plus Internet Relay Chat (IRC). ptyaims project interface is somewhat inspired by naim. However, it uses no code from naim.
The latest version of ptyaim has been tested on Linux, FreeBSD, OpenBSD, NetBSD, Solaris, Tru64 Unix, Mac OS 10.3, and Microsoft Windows 2000. Most likely, it will work on other platforms, too.
Enhancements:
- This new version of ptyaim features improvements to the OSCAR plugin, including support for group chat.
- The TOC plugin has also been removed.

Net::AIM is a Perl extension for AOL Instant Messenger TOC protocol.

SYNOPSIS

use Net::AIM;

$aim = new Net::AIM;
$conn = $aim->newconn(Screenname => Perl AIM,
Password => yaddayadda);
$aim->start;

This module implements an OO interface to the Aol Instant Messenger TOC protocol.

This version contains not much more than hacked code that merely connects to the aol TOC servers and acts on instant messages.

METHODS

Net::AIM->new()

This is the Net::AIM constructor. No arguments needed.

$aim->debug($debug)

Set whether to print DEBUGGING information to STDERRR. Accepts $debug which should be a boolean value.

$aim->set($key, $val)

This method simply sets $key to $val in an internal hash for variables

$aim->get($key)

This method simply gets the value of $key from the internal hash

$aim->newconn()

This method creates a new AIM::Connection object

$aim->getconn()

This method returns a pointer to the AIM::Connection object

$aim->do_one_loop()

This executes one read off the socket.

$aim->start()

This just starts an infinte loop of $aim->do_one_loop;

$aim->timeout($secs);

This sets or returns the current timeout in seconds for the select loop. Takes 1 optional argument. Fractional timeout values are ok.

$aim->add_buddy($send_bool, $group, @buddies);

This adds @buddies to your buddy list, under the group $group. if $send_bool evaluates to TRUE then the toc_add_buddy command is sent to the server. Otherwise it is not sent out. This function will also save the list internally.

$aim->add_permit($send_bool, $group, @buddies);

This adds @buddies to your permit list, under the group $group. if $send_bool evaluates to TRUE then the toc_add_permit command is sent to the server. Otherwise it is not sent out. This function will also save the list internally.

$aim->add_deny($send_bool, $group, @buddies);

This adds @buddies to your deny list, under the group $group. if $send_bool evaluates to TRUE then the toc_add_deny command is sent to the server. Otherwise it is not sent out. This function will also save the list internally.

$aim->remove_buddy($send_bool, $group, @buddies);

This removes @buddies from your buddy list. $group must be the group they were orginally set with for them to be deleted from the internal $aim memory and prevent them from getting added again incase a set_config method is called.

if $send_bool evaluates to TRUE then the toc_add_deny command is sent to the server. Otherwise it is not sent out. This function will also save the list internally.

$aim->set_idle($idle_time)

This method sets our idle time to $idle_time. If $idle_time is omitted it will be set to 0.

$aim->get_info($screen_name)

Sends an info request to the server for $screen_name. The server should reply with a URL which will contain the info requested about the user.

$aim->set_info($info)

This method sets your info or profile information to $info on the server.

$aim->evil($user, $anon)

Warn $screen_name. $anon: boolean value which will determine whether to warn the user anonymously or normally. Anonymous warnings are less severe.

$aim->send($message)

Send $message to the server. This is used internally by other functions to send commands to the server.

$aim->send(toc_add_buddy perlaim)

$aim->chat_invite($room, $msg, @buddies)

Invite @buddies to $room with the message $msg

$aim->chat_accept($room_id)

This will accept an invitation that was sent to us for $room_id

$aim->chat_leave($room_id)

This method instructs the server to take you out of the room $room_id

$aim->chat_whisper($room_id,$user,$msg)

Whisper $msg to $user in the room $room_id

$aim->chat_send($room_id, $message)

Send $message in chat room $room_id

$aim->chat_join($roomname)

Send a request to enter the room $roomname

$aim->send_im($screen_name, $message)

This method sends $message to $screen_name.

$aim->list_rooms();

This method returns an @array of rooms each consisting of ID:ROOM_NAME. For instance: 235236:Perl AIM Chat12 234323:Perl AIM Chat13 235832:Perl AIM Chat14 125082:Perl AIM Chat15

$aim->get_roomname($id)

This method returns the name of the room with id $id.

$aim->set_roomname($id, $roomname)

This saves $roomname in the $aim object in a %hash keyed on $id.

$aim->del_roomname($id)

Deletes $id and its associate value from our roomname hash in $aim

$aim->encode($str)

This method returns $str encoded as per the TOC specs: escaped special chars ({}[]$) and enclosed in quotes (")

$aim->send_config()

This method instructs the module to send our configurations which are the mode (permit/deny/all) and our buddy list to the server and to set it as our saved config on the server

$aim->send_buddies()

This method instructs the module to send all our current buddies to the AOL server.

$set_config_str($config_str, add_bool)

This parses a config string of the form: g Buddies p permit1 p permit2 d deny1 d deny2 b budd1 b budd2

Key: g - Buddy Group (All Buddies until the next g or the end of config are in this group.) b - A Buddy p - Person on permit list d - Person on deny list m - Permit/Deny Mode. Possible values are 1 - Permit All 2 - Deny All 3 - Permit Some 4 - Deny Some

$aim->normalize($data)

This method normalizes $data by killing all but strict alphnumeric characters. Typically used for screen_names.

JClaim is an instant message client, tools, and development framework. JClaim supports AIM, Yahoo!, MSN, ICQ, Jabber, and SMS.

The framework can be used for designing your own tools. The UI includes spell checking and a lot more. A Web interface is included for remote access.