Free acrobat reader software for linux

OPML Reader provides a Feed Reader for any OPML Autodiscovery enabled page.

Open a Feed Reader for any OPML Autodiscovery enabled page. You can choose between Optimal OPML browser and Grazr.

Imagero Reader is a Java library for reading image files. Supported file types include BMP, GIF, TIFF, PNG, JNG, MNG, JPEG (including 12-bit grey), PSD, PBM, PGM, PPM, TGA, EPS, EPSI, and EPSF.
The following RAW file types are also supported, at least partially: MRW, CRW, NEF, DCR, and DNG. It can read thumbnails, read metadata (IPTC, EXIF, and XMP), edit metadata, get image width and height, get the number of images contained in a file, define an area to read, add a ProgressListener, choose an image channel to read, set a scale factor, set subsampling (JPEG only), and read an image (or channel) directly into an array.
Supported file types are:
- BMP 1, 4, 8, 16, 24 and 32 bit uncompressed; 4 and 8 bit compressed
- GIF
- TIFF 1, 4, 8, 16, 32, 48 and 64 bit per pixel; bilevel, grayscale, palette, RGB, CMYC, Cie Lab, YCrCb color spaces; CCIT1D, G3, G4, ZIP, JPEG, LZW and PackBits compression
- PNG, JNG, MNG
- JPEG inclusive CMYC and 12-bit grey
- PSD
- PBM, PGM, PPM
- TGA
- read embedded images from EPS, EPSI, EPSF
Supported RAW files:
- MRW
- CRW*, CR2*, THM
- NEF*
- DCR*
- DNG*
- Full resolution image cant be yet read, but thumbnail, preview and metadata can be read.
Main features:
- read thumbnails
- read/edit metadata
- any metadata contained in ImageResourceBlock ( PSD, JPEG, TIFF) and ImageFileDirectrory entry ( TIFF, NEF, DNG, DCR) can be edited full control over JPEG metadata
- get image width and height
- get number of images, contained in file
- define an area to read
- add a ProgressListener
- estimate JPEG compression/quality
- read an image channel
- set a scale factor
- set subsampling (JPEG only)
- read an image (or channel) directly into an array
- easy IPTC handling with IPTCParser and IPTCEditor
Whats New in 1.9.6 Stable Release:
- The EPS parser was partially rewritten and made more generic and easy to use.
- It may be used now to parse nearly every kind of data (as a programmable parser).
- Thumbnails are read from AI (Illustrator) files.
- Disc based image caching was implemented (but is beta).
- New methods were added to TiffUtils: insert IFDEntry, remove IFDEntry, and create and insert IFDEntry with IPTC data.
- Two utility classes were added for creating and adding EXIF and GPS data to TIFF images.
- An important bug in XMPApp1 concerning wrong field length was fixed.
Whats New in 2.0.0 RC3 Development Release:
- It is possible to write TIFF images now. TiffWriter can currently write RGB, ARGB, CMYK, and grayscale (8 bit) images.
- Supported compression schemes are uncompressed, PackBits, and ZIP.
- Bugfixes were made.

AJAX Book Reader is a complete AJAX client-server application that may be used with a Web browser to display a sequence of text files one page at a time.

The display style is completely controlled by a configuration file. The first application of this is as a book viewer where each chapter resides in a seperate text file.

AJAX Book Reader application is also suitable for any case where it is not practical to show all of the text to be displayed at once in the browser window.

It is assumed there is a directory that contains text files named [book][chapter]#.[ext]
and directory has been assigned to the $shelf variable in .pt-config
and [book] is 1 to N characters to identify a collection of chapters
and [chapter] is the chapter seperator (default=c)
and # is the 0 based chapter number
and [ext] is the extension of the text files (default=.txt)
and each file contains one chapter of text
and there is optionally a chapter index file [book].lis
in the shelf directory where the first line is the title of the book
and the second line is the authors name
and subsequent lines are the chapter names

It is further assumed that read.php contains the div tags < div > with an id of title, where the books title will be placed author, where the authors name will be placed navbar, where the page/chapter navigation controls will be placed page, where the text of the page will be placed

.pt-config should be changed to suit your preferences but there is nothing else especially designed to be user configurable in the other files

RTF::Reader is a base class for building RTF-processing modules.

Gives you a simple toolset for doing what you want with RTF

THIS MODULE IS AT BEST BETA, AT WORST, STILL IN PLANNING. The interface may change, the docs are almost certainly slighty out of date.... The latest version of all this is in CVS - use that instead where possible. Details at http://rtf.perl.org/...

RTF::Reader is a base-class that opens up an API for you to use to convert RTF into other formats. The basic model is that you have contexts which represent places in an RTF document, for which you can define what action is taken when different types of RTF constructs are encountered.

Before starting, you should also read RTF::Reader::Context to get a better idea of how to do this.

Gaim-RSS-Reader is a plugin for the popular Gaim multi-protocol chat client that adds the ability to monitor and read RSS feeds.

To install follow these commands:
./configure --prefix /usr --with-gaim=PATH
make
make install

Stream::Reader is a stream reader Perl class.

SYNOPSIS

# Input stream can be reference to TYPEGLOB or SCALAR, output stream
# can be the same types or undefined

# Constructor
$stream = Stream::Reader->new( *IN,
{ Limit => $limit, BuffSize => $buffsize, Mode => UB } );

# Reading all before delimiter beginning from current position.
# Delimiter is SCALAR or reference to array with many SCALARs.
# Returns true value on succesfull matching or if end of stream
# expected at first time
$bool = $stream->readto( $delimiter,
{ Out => *OUT, Limit => $limit, Mode => AIE } );

# Reading fixed number of chars beginning from current position.
# Returns true value if was readed number of chars more then zero or
# end of stream was not expected yet
$bool = $stream->readsome( $limit, { Out => *OUT, Mode => A } );

# Mode is string, what can contains:
# U - modificator for constructor. disable utf-8 checking
# B - modificator for constructor. enable second buffer for speed up
# case insensitive search
# A - modificator for readto() and readsome(). appending data to
# output stream, if stream is SCALAR
# I - modificator for readto(). enable case insensitive search
# E - modificator for readto(). at end of input stream alltimes
# returns false value

$number = $stream->{Total}; # total number of readed chars
$number = $stream->{Readed}; # number of readed chars at last
# operation (without matched string
# length at readto() method)
$number = $stream->{Stored}; # number of succesfully stored chars
# at last operation
$string = $stream->{Match}; # matched string at last operation
# (actually for readto() only)
$bool = $stream->{Error}; # error status. true on error

METHODS

OBJ = Stream::Reader->new( INPUT, { ... Params ... } )

The constructor method instantiates a new Stream::Reader object.

INPUT - is a reference to file stream, opened for reading, or reference to defined string. This is an obligatory parameter.

Params (all optionaly):

Limit - limit size of input stream data in characters. If this parameter is absent, not defined or less then zero, then all data from input stream will be available for reading.

BuffSize - size of buffer in characters. If this parameter is absent, not defined or less then zero, then will be used default buffer size 32768 characters.

Mode - is string with letters-modificators:

B - use second buffer. Can really speed up search in case insensitive mode.
U - disable UTF-8 data check in UTF-8 mode. Use this flag if you are absolutely sure, that your UTF-8 data is valid.

RESULT = OBJ->readto( DELIMITER, { ... Params ... } )

This method reads all data from input stream before first found delimiter, beginning from current position.

RESULT - boolean value. True value if successfuly found delimeter or and of input stream has expected at first time. False value otherwise, or in case of reading error.

DELIMETER - is a string-delimeter or reference to array with many delimeters. This is an obligatory parameter and must be defined.

Remember! In case of many delimiters, left delimiter alltimes have more priority then right!

Params (all optionaly):

Out - is a reference to file stream, opened for writing, or reference to string. If this parameter is absent then data will not stored.
Limit - size in characters. Defines, the maximum number of characters that must be stored in Out. If this paramter is absent, not defined or less then zero, then this method will be trying to store all readed data.
Mode - is string with letters-modificators:
A - appendig data to Out if Out is a reference to string.
I - search in case insensitive mode.
E - at the end of input stream returns only false value. Without this modificator, if end of stream expected at first time, then will be returned true value.

RESULT = OBJ->readsome( LIMIT, { ... Params ... } )
This method reads fixed number of characters from input stream beginning from current position.

RESULT - boolean value. True value, if any characters were read or end of input stream is not expected yet. False value otherwise, or in case of reading error.

LIMIT - limit size in characters, how many it is necessary to read. If this parameter is absent, not defined or less then zero, then will be read all available data from input stream.

Params (all optionaly):

Out - the same as in readto() method.
Mode - is string with letters-modificators:
A - the same as in readto() method.

Statistics:

OBJ->{Total} - total number of readed characters. Warning! This module using block reading and real position in stream is different.
OBJ->{Readed} - number of readed characters at last operation (without matched string length at readto() method).
OBJ->{Stored} - number of succesfully stored chars at last operation
OBJ->{Match} - matched string at last operation (actually for readto() only)
OBJ->{Error} - boolen error status. At any reading erorrs all operations will be stopes and this flag turned to true value.

This package makes it easy to read and write java classfiles. It doesnt, however, provide any help with displaying the contents of a classfile to the user (unless you count debug output), or disassembling the bytecodes.

This code snippet will read in a classfile and write it back out to a different file.

InputStream is = new FileInputStream("Foo.class");
OutputStream os = new FileOutputStream("FooCopy.class");
ClassInfo classInfo = new ClassInfo();
new ClassFileReader().read(is, classInfo);
classInfo.setName("FooCopy"); // Java requires the class name to match the file name
new ClassFileWriter().write(classInfo, os);
is.close();os.close();

The package can read "obfuscated" classfiles, like those generated by Crema, but it cant write them. Obfuscated classfiles have invalid data in them and the only reason they work is because most VMs ignore the data thats invalid (attributes like SourceFile, LineNumberTable, and LocalVariableTable). If a ClassFileReader encounters invalid data, it just ignores it.