Free 9.x software for linux

RapidSVN is a cross-platform GUI front-end for the Subversion revision system written in C++ using the wxWidgets framework. RapidSVN also includes a Subversion client C++ API.
We want to build a best of breed visual client that utilizes the best features of clients from other revision control architectures. While being easy enough for users new to Subversion to work with it must also be powerful enough to make experienced users even more productive.
Main features:
- Simple - provides an easy to use interface for Subversion features
- Efficient - simple for beginners but flexible enough to increase productivity for experienced Subversion users
- Portable - runs on any platform on which Subversion and wxWidgets can run: Linux, Windows, Mac OS 9/X, Solaris, etc.
- Fast - entirely written in C++

Gsmb provides a graphical interface allowing simplified management of the file of the Samba users file /etc/smbpasswd.

In initial Windows 95 releases, passwords for accessing shared volumes were sent as cleartext over the network. Sambda authentication used the /etc/passwd file on the server. The Windows 95 updates introduced encryption of these passwords. There are two methods for making Samba support this new authentication scheme:

- modify the register base of Win95 clients to reactivate cleartext passwords
- configure Samba so that it accepts the encrypted password

The second option is what we are interested in here.

Installation:

You can download version 0.5 (released 1999-09-30) of gsmb.

To activate the recognition of encrypted passwords, the option ENCRYPT PASSWORDS = yes should be positioned in the /etc/smb.conf configuration file.

In addition to this, it is necessary to create the Samba users file. On Redhat 5.2, this is called /etc/smbpasswd.

The Gsmb program allows the management of the Samba users by modifying this file. It uses the Gtk 1.2.0. library.

Usage:

At this point, the possibility of the program are the following:

- The function Quit presented in the menu "File" allow to quit the program (Incredible, isnt it !!)

- The function presented in the menu "smbpasswd/create smbpasswd version 1.9.x from passwd" will erase the "/etc/smbpasswd" and another one. The /etc/passwd is read and a Samba count is created for each Linux users. The /etc/smbpasswd is filled with the samba 1.9.x format.

- The function presented in the menu "smbpasswd/create smbpasswd version 2.0.x from passwd" will erase the "/etc/smbpasswd" and another one. The /etc/passwd is read and a Samba count is created for each Linux users. The /etc/smbpasswd is filled with the samba 2.0.x format.

- The function presented in the menu "smbpasswd/create another users" creates a linux users by calling the program Adduser.

- The buttons between the two list permits to create samba users. Before, just select in the linux list one or several users, select the format you want, and then click on the button with the arrows. This action will create the corresponding Samba users.

- Possibility to delete Samba users. First, select the Samba users (Dont forget the shift and crtl buttons for multiple selection) and then click on the button delete.

- You have the possibility now have a null password for Samba users. If the row for a user is red, then you have validate the Null password option for this user.

- You can disable Samba users accounts. For the format 1.9.x, the password field will be replaced by "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX". For the format 2.0.X, the "D" will be added in a field. In each case, you can see the state of the account in the first column of the samba users list.

Fastcmv provides a simple Web content management solution for Webmasters.
Fastcm is a simple Web content management system. It allows the same content to be shared throughout an entire site or several different sites.
It is an individual tool for a Webmaster rather than a collaborative system.
Fastcm content typically consists of HTML fragments which are meant to be assembled.
Enhancements:
- Fastcm works on either any Unix system, with clispinstalled (at least the clisp version 2.27), or a Mac with MacOS classic (8.x or 9.x).
- Right now, it does not work on Windows system, but we work hard to fix that (we have to add specific code for Windows in order to manipulate the file system).

lib378 is a library for predictive text input. The API is very simple and provides dictionary autocompletion and both partial and full matching.
The project can be used to get text input from input devices with few keys (like cellphones).
Example:
#include < stdio.h >
#include < termios.h >
#include < unistd.h >
#include "378.h"
char mygetch ( void )
{
int ch;
struct termios oldt, newt;
tcgetattr ( STDIN_FILENO, &oldt );
newt = oldt;
newt.c_lflag &= ~( ICANON | ECHO );
tcsetattr ( STDIN_FILENO, TCSANOW, ?wt );
ch = getchar();
tcsetattr ( STDIN_FILENO, TCSANOW, &oldt );
return ch;
}
l378_DECLARE();
l378_KEYMAP = {
[a] = 2, [b] = 2, [c] = 2,
[d] = 3, [e] = 3, [f] = 3,
[g] = 4, [h] = 4, [i] = 4,
[j] = 5, [k] = 5, [l] = 5,
[m] = 6, [n] = 6, [o] = 6,
[p] = 7, [q] = 7, [r] = 7, [s] = 7,
[t] = 8, [u] = 8, [v] = 8,
[w] = 9, [x] = 9, [y] = 9, [z] = 9
};
static FILE* l378_dictionary;
int main( const int argc, const char *argv[] )
{
char c;
char* s = NULL;
if( !(l378_dictionary = fopen( "compressed.dict", "r" )) )
return -1;
printf( " 1 2 3n" );
printf( " C abc defnn" );
printf( " 4 5 6n" );
printf( " ghi jkl mnonn" );
printf( " 7 8 9n" );
printf( " pqrs tuv wxyznn" );
printf( " TAB 0 - n" );
printf( " auto _ nextnn" );
while( n != (c = mygetch()) )
{
switch( c )
{
//case 0:
// break;
case t:
if( (s = l378_match()) )
printf( "%sr", s );
continue;
case -:
break;
case 1:
printf( "ttttr" );
l378_popc();
break;
case 2:
case 3:
case 4:
case 5:
case 6:
case 7:
case 8:
case 9:
l378_pushc( c );
break;
default:
continue;
}
if( (s = l378_matche()) )
printf( "%sr", s );
else
printf( "%sr", l378_pattern );
}
printf( "n" );
fclose( l378_dictionary );
return 0;
}
// eof
Enhancements:
- The API was cleaned up.
- The compression algorithm was improved.
- Optional bz2 support was added.
- The cellphone example was updated.
- A sample English dictionary was added.
- Minor code fixes were made.

rmp3 is a receiver for the rmp3 broadcast protocol. This protocol uses teletext data transmitted in the VBI (vertical blanking interval) of TV transmissions to broadcast mp3-files (e.g. RadioMP3 and MegaRadio). rmp3 currently is a command-line application. A GUI is forthcoming.
rmp3 is free software and released under the GNU General Public License. See the file COPYING for more information. See the file AUTHORS, too.
The rmp3 protocol is designed to be used by MEGARADIO http://www.megaradio.net/
to broadcast their program via NBC Europe TV.
NBC Europe TV can be received:
Via analog cable-TV in Germany. Some areas have only part-time reception.
Check http://www.kabelanschluss.com/ for details.
Via Eutelsat HOTBIRD (almost everywhere in Europe) with a *digital* (DVB) receiver. You either need a digital set-top box that re-inserts the teletext stream into the analog signal routed to your TV card. Or you need a DVB-s card and a direct connection to your satellite dish.
Note that NBC Europe cannot be received with an analog satellite receiver. And no, NBC Europe is not on Astra -- do not confuse it with CNBC.
Since rmp3 is a data service you need a pretty good reception of the TV signal. Even if you barely see any snow in the TV picture you may still get too many errors for it to be usable. Check the cable to your TV card (short cables are better) and the finetuning (xawtv: cursor left/right). Use rmp3 -v to check the signal quality indicator (Q=10 is perfect, lower numbers are worse).
Of course this means you either need an (analog) TV card or a (digital)
DVB-S card supported by Linux. It is probably a good idea to get the card
running with a program to watch TV *before* you try running rmp3. xawtv
and alevt are the most popular choices for watching TV and browsing teletext.
Please see the Linux FAQs for details.
The authors of rmp3 would like to point out that we wrote rmp3 but we
are NOT RESPONSIBLE for the RADIO PROGRAM that is broadcast by MEGARADIO!
Please DO NOT COMPLAIN TO US about the music they play or the quality
of the MP3s they send. We cant do anything about it!
In particular MEGARADIO at the time of this writing (August 2002) has the
following problems:
The stream is sent either at 96 kbit/s or 128 kbit/s depending on the time of the day. Although they claim that the former is required because an additional teletext magazine is sent, there is no technical reason for that. If the stream is sent with the correct speed (see below) there is enough room in the VBI to send the teletext magazine even at 128 kbit/s.
The stream is sent too fast (106% for 96 kbit/s and 114% for 128 kbit/s)! But without a correct stream timing listening to the stream is a pain. Since your soundcard can only play at a fixed rate some buffer will inevitably overflow after a short time. You will her a popping noise in the audio and a piece of the song is lost. Note that file saving is
not affected. If you both listen to the stream and save the stream, files will be saved ok even if the audio fails. The only workaround we can offer is to increase the queue length (e.g. rmp3 -Q 1000 will allocate around 900K). But this just delays the problem. You will soon see asynchronous output if you use multiple plugins.
The 128 kbit/s MP3 files are of low quality. Apparently they are not generated with the best encoding and not from an uncompressed source.
All MP3 file names are in UPPERCASE and are missing all special characters. The save script tries to compensate for that but this is of course not perfect.
The MP3 files have ID3 tags now, but they are in UPPERCASE and incomplete.
There are no covers or structured song names, yet.
The are a few violations of the rmp3 protocol which may lead to corrupted MP3 files if there are many errors or gaps in the stream (the stream ID is not changed and empty garbage files are sent).
Sometimes there are long pauses between songs or the rmp3 stream is stopped and then started again. Just have a bit of patience. Sigh.
All of this may be obsolete by the time you read this (we hope so).To find the latest unofficial rumors and gossip about MEGARADIO, please visit: http://www.rettet-radiomp3.de/forum/ (in German only)
Enhancements:
- added Jens V4L 0.9.x stuff

mpg123 is a real time MPEG Audio Player for Layer 1,2 and Layer3. (MPEG 2.0 with Layer1/2 not heavily tested) Tested with Linux, FreeBSD, SunOS4.1.3, Solaris 2.5, HPUX 9.x and SGI Irix.
Plays Layer 3 in stereo on an AMD-486-120Mhz or (of course) a faster machine. (Just for info: mpg123 plays an average 128bps stream, with about 66% in full quality on my AMD 486-133MHz machine).
The project is not maintained at the moment and there are some serious security problems in the latest player versions. It is highly recommended to not use the source code you can download from this site.
Enhancements:
- This release adds SSE and 3DNowExt optimizations from MPlayers mp3lib, as well as a combined build for x86 with runtime CPU selection/detection.
- Bugs have been fixed and the operating system support widened: there is MinGW32/Msys support, as well as full x86 optimizations on Cygwin and Mac OS X with Intel Macs.
- Other feature additions include a named pipe for generic control, more terminal controls, an extra build for 32-bit float sample output, etc.

tvtime is a high quality television application for use with video capture cards on Linux systems.
tvtime processes the input from a capture card and displays it on a computer monitor or projector.
The following is a list of capture card drivers for Linux and how well they are supported by tvtime. If you have more up-to-date information about using any of these drivers, please let me.
bttv version 0.9.x (2.6 kernels)
bttv version 0.7.x (2.4 kernels)
saa7134
cx88
rivatv
dvb-kernel / saa7146
mach64 v4l2
ivtv
usbvision
zoran
v3tv
GATOS
marvel
Enhancements:
- Missing translations were added.
- The "noop" command for removing key bindings was fixed.