Free 3ds max tutorial software for linux

Derbrill Tutorials are Free Tutorials For Writing Games and Multimedia Applications in Runtime Revolution with ArcadeEngine.

The tutorials come in a visually appealing e-book format which is both easy to read and use, the range of topics covered includes:

* The basics of Revolution such as: stacks, cards, scripts, messages and timers
* How to use geometric properties such as distances, angles and intersection rectangles
* Understanding and using different movements including linear, polygonal, circular and elliptic
* Advanced use of images
* Using the built-in collision detection

Imager::Tutorial is an introduction to Imager.

Before you start

If you have the necessary knowledge, install the image format libraries you want Imager image file support for, and Imager itself, otherwise arrange to have it done.
You will also want some sort of image viewer tool, whether an image editor like Photoshop or the GIMP, or a web browser.

Hello Boxes! - A Simple Start

As with any perl program its useful to start with a #! line, and to enable strict mode:

#!/usr/bin/perl -w
# you might to use warnings; instead of the -w above
use strict;

These lines will be omitted in further examples.

As with any module, you need to load it:

use Imager;

Now create a image to draw on:

my $image = Imager->new(xsize => 100, ysize => 100);

and draw a couple of filled rectangles on it:

$image->box(xmin => 0, ymin => 0, xmax => 99, ymax => 99,
filled => 1, color => blue);
$image->box(xmin => 20, ymin => 20, xmax => 79, ymax => 79,
filled => 1, color => green);

Since the first box fills the whole image, it can be simplified to:

$image->box(filled => 1, color => blue);

and save it to a file:

$image->write(file=>tutorial1.ppm)
or die Cannot save tutorial1.ppm: , $image->errstr;

So our completed program is:

use Imager;

my $image = Imager->new(xsize => 100, ysize => 100);

$image->box(filled => 1, color => blue);
$image->box(xmin => 20, ymin => 20, xmax => 79, ymax => 79,
filled => 1, color => green);

$image->write(file=>tutorial1.ppm)
or die Cannot save tutorial1.ppm: , $image->errstr;

XML::Smart::Tutorial is a Perl module with tutorials and examples for XML::Smart.

SYNOPSIS

This document is a tutorial for XML::Smart and shows some examples of usual things.

Template::Tutorial are template toolkit tutorials.

This section includes tutorials on using the Template Toolkit. Subjects currently include an general overview of the Template Toolkit, showing users how to get quickly up to speed building web content, and a tutorial on generating and using data files, with particular reference to XML.

Template::Tutorial::Web

Generating Web Content Using the Template Toolkit

This tutorial provides an introduction to the Template Toolkit and a "quick start" guide to getting up to speed. Its primarily focus is on using the Template Toolkit to build web content and it covers 4 basic areas: using tpage and ttree; using the Template.pm module in CGI scripts; writing Apache/mod_perl handlers; and extending the toolkit by writing plugins.

Template::Tutorial::Datafile

Creating Data Output Files Using the Template Toolkit

This tutorial gives an overview of the Template Toolkit, showing in particular how to use it to read and write data files in various different formats and styles. It was written by Dave Cross and first appeared as a lead article at http://www.perl.com/ earlier in the year (2001).

MARC::Doc::Tutorial is a documentation-only module for new users of MARC::Record.

SYNOPSIS

perldoc MARC::Doc::Tutorial

What is MARC?

The MAchine Readable Cataloging format was designed by the Library of Congress in the late 1960s in order to allow libraries to convert their card catalogs into a digital format. The advantages of having computerized card catalogs were soon realized, and now MARC is being used by all sorts of libraries around the world to provide computerized access to their collections. MARC data in transmission format is optimized for processing by computers, so its not very readable for the normal human. For more about the MARC format, visit the Library of Congress at http://www.loc.gov/marc/

What is this Tutorial?

The document you are reading is a beginners guide to using Perl to processing MARC data, written in the cookbook style. Inside, you will find recipes on how to read, write, update and convert MARC data using the MARC::Record CPAN package. As with any cookbook, you should feel free to dip in at any section and use the recipe you find interesting.

If you are new to Perl, you may want to read from the beginning.
The document you are reading is distributed with the MARC::Record package, however in case you are reading it somewhere else, you can find the latest version at CPAN: http://www.cpan.org/modules/by-module/MARC/. Youll notice that some sections arent filled in yet, which is a result of this document being a work in progress. If you have ideas for new sections please make a suggestion to perl4lib: http://www.rice.edu/perl4lib/.

PDF::Reuse::Tutorial is a Perl module that will teach you how to produce PDF-files with PDF::Reuse.

In this tutorial I will show some aspects of PDF::Reuse, so you should be able to use it in your own programs. Most important is how to produce and reuse PDF-code, and then if you are interested, you can look at Graphics and JavaScript, so you can to do special things.

Reusing code:

You can take advantage of what has been done before, it is not necessary to start from scratch every time you create a PDF-file. You use old PDF-files as a source for forms, images, fonts and texts. The components are taken as they are, or rearranged, and you add your own texts and you produce new output.
If you dont care too much about the size of your templates, you should make them with a commercial, visual tool, thats most practical; and then you should use PDF::Reuse to mass produce your files. In this tutorial I show in many places how create single files with PDF::Reuse. That is possible, but more of an exception. I do it here to show the technique. You will anyway need it to add texts and graphics to your templates.

Graphics:

With this module you get a good possibility to program directly with the basic graphic operators of PDF. This is perhaps an advanced level, and you can avoid it if you want. On the other hand, it is not very difficult, and if you take advantage of it, your possibilities to manage text and graphics increase very much. You should look at the "PDF-reference manual" which probably is possible to download from http://partners.adobe.com/asn/developer/acrosdk/docs.html. Look especially at chapter 4 and 5, Graphics and Text, and the Operator summary.
Whenever the function prAdd() is used in this tutorial, you can probably get more explanations in the "PDF-reference manual". The code, you add to the content stream with prAdd(), has to follow the PDF syntax completely.

JavaScript:

You can add JavaScript to your PDF-file programmatically. This works with Acrobat Reader 5.0.5 or Acrobat 5.0 and higher versions.

You should have the "Acrobat JavaScript Object Specification" by hand. If you havent got Acrobat, you can probably download it from http://partners.adobe.com/asn/developer/technotes/acrobatpdf.html. It is technical note # 5186. JavaScript for HTML and PDF differs so much that you need the manual, even if you know JavaScript very well.

Bigtop::Docs::Tutorial is a simple case study of building a web app with bigtop.
Many (not all) applications are mostly data managers. That is, they are really intermediaries between users and various tables in a database. A bigtop file is meant to be a single place to describe all (or practically all) facits of the data in an application. This includes at least:
- The name and special features of each controller.
- The name of each table in the database.
- A description of each column (field) in each table in the database. This includes at least:
- its name and SQL type
- the label the user sees for it when it appears on the screen
- what type of html form element the user uses to enter or update it
- how the data is validated and filtered on its way into and out of the database (filtering yet supported)
- which table the field refers to if it is a foreign key
- etc.
All of these things, and more, are described in a Bigtop file. That file can be given to bigtop to build the application. Once it is built, it can be safely rebuilt so that only the generated bits are changed (this is accomplished by maintaining a clean separation between generated and hand edited files, and by config options in the bigtop file).
Notice that nothing in the above has committed you or me to any particular web application framework, data modeling scheme, templating system, or web server. Bigtop is neutral (think big tent), at least for Perl apps delivered via the web.

IPTables-tutorials aim is to explain iptables in a complete and simple way. The iptables-tutorial is currently rather stable, and contains information on all the currently available matches and targets (in kernel), as well as a couple of complete example scripts and explanations. It contains a complete section on iptables syntax, as well as other interesting commands such as iptables-save and iptables-restore.

The tutorial has recently been under heavy scrutiny and updating, as can be seen in this, the latest version of the tutorial. It is now also available in bookform from Lulu.com. If you feel like contributing or donating to the author of this tutorial, please do buy the book! Thank you!

If you need help, you are better off by asking the netfilter mailing list which you can reach at netfilter at lists.netfilter.org. For more information on this, visit the netfilter mailinglist page. You may also contact the linuxsecurity mailing list at security-discuss AT linuxsecurity dotcom. Both are fairly large, and should be able to help you much much better than I can.