EtherApe 0.9.7

EtherApe is a GNOME/pcap-based etherman, interman, and "tcpman" clone. It displays network activity graphically. Active hosts are shown as circles of varying size, and traffic among them is shown as lines of varying width.
EtherApe project supports Ethernet, FDDI, Token Ring, ISDN, PPP, and SLIP. Additional statistics windows will let you concentrate on protocols or nodes.
Main features:
- Network traffic is displayed graphically. The more "talkative" a node is, the bigger its representation.
- Node and link color shows the most used protocol.
- User may select what level of the protocol stack to concentrate on.
- You may either look at traffic within your network, end to end IP, or even port to port TCP.
- Data can be captured "off the wire" from a live network connection, or read from a tcpdump capture file.
- Live data can be read from ethernet, FDDI, PPP and SLIP interfaces.
- The following frame and packet types are currently supported: ETH_II, 802.2, 803.3, IP, IPv6, ARP, X25L3, REVARP, ATALK, AARP, IPX, VINES, TRAIN, LOOP, VLAN, ICMP, IGMP, GGP, IPIP, TCP, EGP, PUP, UDP, IDP, TP, IPV6, ROUTING, RSVP, GRE, ESP, AH, ICMPV6, EON, VINES, EIGRP, OSPF, ENCAP, PIM, IPCOMP, VRRP; and most TCP and UDP services, like TELNET, FTP, HTTP, POP3, NNTP, NETBIOS, IRC, DOMAIN, SNMP, etc.
- Data display can be refined using a network filter.
- Display averaging and node persistence times are fully configurable.
- Name resolution is done using standard libc functions, thus supporting DNS, hosts file, etc.