deja-packet 1.0

deja-packet transmits raw packets through a specified interface.

Usage: ./deja-packet -pcap < libpcap capture file > < interface name >
or: ./deja-packet -raw < raw packet file > < interface name >

Note: you must be root to successfully transmit packets with deja-packet due to the Linux security restrictions with raw sockets.

In the [-p]cap mode, deja-packet transmits selected packets from a libpcap capture file (such as one created by Ethereal/Wireshark, or tcpdump). In the [-r]aw mode, deja-packet transmits the raw contents of a file as one whole packet.

The [-p]cap mode is interactive: the user will be continuously prompted to select which packet from the libpcap capture file to transmit, until the “q” character is encountered, where the program will quit.

Example pcap mode:

$ sudo ./deja-packet -p icmp_ping.pcap eth0
Select packet number (1 to 6) for transmission or q for quit: 1
Successfully transmitted packet!
Select packet number (1 to 6) for transmission or q for quit: 2
Successfully transmitted packet!
Select packet number (1 to 6) for transmission or q for quit: 5
Successfully transmitted packet!
Select packet number (1 to 6) for transmission or q for quit: 6
Successfully transmitted packet!
Select packet number (1 to 6) for transmission or q for quit: q
$

In the [-r]aw mode, deja-packet exits immediately after the attempted transmission is complete (allows deja-packet to be easily used with a script).

Example raw mode:

$ sudo ./deja-packet -r samplepacket eth0
Successfully transmitted packet!
$

icmp_ping.pcap is included as a sample libpcap capture file.

To compile deja-packet, simply use the command “make”.

deja-packet remains Linux-only because it requires PF_PACKET sockets.

This project is released under the GNU General Public License version 2.