Configuration with no services supported

Configuration with no services supported script is for a single host firewall configuration with no services supported by the firewall machine itself.

Sample:

# USER CONFIGURABLE SECTION

# The name and location of the ipchains utility.
IPTABLES=iptables

# The path to the ipchains executable.
PATH="/usr/local/sbin"

# Our internal network address space and its supporting network device.
OURNET="10.5.0.0/24"
OURBCAST="10.5.0.255"
OURDEV="eth0"

# The outside address and the network device that supports it.
ANYADDR="0/0"
ANYDEV="ppp0"

# The TCP services we wish to allow to pass - "" empty means all ports
# note: comma separated
TCPIN="ssh,ftp,ftp-data"
TCPOUT="smtp,www,ssh,telnet,ftp,ftp-data,irc,http"

# The UDP services we wish to allow to pass - "" empty means all ports
# note: comma separated
UDPIN="domain"
UDPOUT="domain"

# The ICMP services we wish to allow to pass - "" empty means all types
# ref: /usr/include/netinet/ip_icmp.h for type numbers
# note: comma separated
ICMPIN="0,3,11"
ICMPOUT="8,3,11"

# Logging; uncomment the following line to enable logging of datagrams
# that are blocked by the firewall.
# LOGGING=1

# END USER CONFIGURABLE SECTION
####################################
# Flush the Input table rules
echo -n Flushing forward... && {
$IPTABLES -F FORWARD
} && echo done

# We want to deny incoming access by default.
# echo -n Denying incoming access... && {
# $IPTABLES -P FORWARD drop
# } && echo done

# Drop all datagrams destined for this host received from outside.
echo -n Dropping incoming datagrams... && {
$IPTABLES -A INPUT -i $ANYDEV -j DROP
} && echo done

# SPOOFING
# We should not accept any datagrams with a source address matching ours
# from the outside, so we deny them.
echo -n Preventing spoofing... && {
$IPTABLES -A FORWARD -s $OURNET -i $ANYDEV -j DROP
} && echo done

# SMURF
# Disallow ICMP to our broadcast address to prevent "Smurf" style attack.
echo -n Preventing SMURFs... && {
$IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET -j DROP
} && echo done

# We should accept fragments, in iptables we must do this explicitly.
echo -n Accepting fragments... && {
$IPTABLES -A FORWARD -f -j ACCEPT
} && echo done

# TCP
# We will accept all TCP datagrams belonging to an existing connection
# (i.e. having the ACK bit set) for the TCP ports were allowing through.
# This should catch more than 95 % of all valid TCP packets.
echo -n Accepting valid incoming tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -d $OURNET --dports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done
echo -n Accepting valid outgoing tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -s $OURNET --sports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done

# TCP - INCOMING CONNECTIONS
# We will accept connection requests from the outside only on the
# allowed TCP ports.
echo -n Accepting incoming tcp connections on allowed ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $ANYDEV -d $OURNET --dports $TCPIN --syn -j ACCEPT
} && echo done

# TCP - OUTGOING CONNECTIONS
# We will accept all outgoing tcp connection requests on the allowed TCP ports.
echo -n Accepting outgoing traffic on allowed tcp ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $OURDEV -d $ANYADDR --dports $TCPOUT --syn -j ACCEPT
} && echo done

# UDP - INCOMING
# allow UDP datagrams in on the allowed ports and back.
echo -n Allowing UDP datagrams in on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -d $OURNET --dports $UDPIN -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -s $OURNET --sports $UDPIN -j ACCEPT
} && echo done

# UDP - OUTGOING
# We will allow UDP datagrams out to the allowed ports and back.
echo -n Allowing UDP datagrams out on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -d $ANYADDR --dports $UDPOUT -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -s $ANYADDR --sports $UDPOUT -j ACCEPT
} && echo done

# ICMP - INCOMING
# We will allow ICMP datagrams in of the allowed types.
# echo -n Allowing ICMP datagrams in of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET --icmp-type $ICMPIN -j ACCEPT
# } && echo done

# ICMP - OUTGOING
# We will allow ICMP datagrams out of the allowed types.
# echo -n Allowing ICMP datagrams out of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $OURDEV -d $ANYADDR --icmp-type $ICMPOUT -j ACCEPT
# } && echo done

# DEFAULT and LOGGING
# All remaining datagrams fall through to the default
# rule and are dropped. They will be logged if youve
# configured the LOGGING variable above.
#

# DoS
# enabling Syn-flood protection
echo -n Enabling Syn-flood protection... && {
iptables -A FORWARD -p tcp --syn -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling Furtive port scanner protection
echo -n Enabling Furtive port scanner protection... && {
iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling ping of death protection
echo -n Enabling ping of death protection... && {
iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
} && echo done


if [ "$LOGGING" ]
then
# Log barred TCP
$IPTABLES -A FORWARD -m tcp -p tcp -j LOG
# Log barred UDP
$IPTABLES -A FORWARD -m udp -p udp -j LOG
# Log barred ICMP
$IPTABLES -A FORWARD -m udp -p icmp -j LOG
fi
#
# end.